1.A clinical review of the patients with upper gastrointestinal bleed- ing entered to emergency room and factors influencing the outcome.
Sun Jin KIM ; Pyeong Rang CHOO ; Won Sook GYE ; Ho Cheol SHIN ; Eun Sook PARK
Journal of the Korean Academy of Family Medicine 1991;12(2):20-27
No abstract available.
Emergencies*
;
Emergency Service, Hospital*
;
Humans
2.Effects of laser-irradiated dentin on shear bond strength of composite resin.
Sung Sook KIM ; Jong Il PARK ; Jae In LEE ; Gye Sun KIM ; Hye Won CHO
The Journal of Korean Academy of Prosthodontics 2008;46(5):520-527
PURPOSE: This study was conducted to evaluate the shear bond strength of composite resin to dentin when etched with laser instead of phosphoric acid. MATERIAL AND METHODS: Recently extracted forty molars, completely free of dental caries, were embedded into acrylic resin. After exposing dentin with diamond saw, teeth surface were polished with a series of SiC paper. The teeth were divided into four groups composed of 10 specimens each; 1) no surface treated group as a control 2) acid-etched with 35 percent-phosphoric acid 3) Er:YAG laser treated 4) Er,Cr:YSGG laser treated. A dentin bonding agent (Adapter Single Bond2, 3M/ESPE) was applied to the specimens and then transparent plastic tubes (3 mm of height and diameter) were placed on each dentin. The composite resin was inserted into the tubes and cured. All the specimens were stored in distilled water at 37degree C for 24 hours and the shear bond strength was measured using a universal testing machine (Z020, Zwick, Germany). The data of tensile bond strength were statistically analyzed by one-way ANOVA and Duncan's test at alpha = 0.05. RESULTS: The bond strengths of Er:YAG laser-treated group was 3.98 +/- 0.88 MPa and Er,Cr:YSGG laser-treated group showed 3.70 +/- 1.55 MPa. There were no significant differences between two laser groups. The control group showed the lowest bond strength, 1.52 +/- 0.42 MPa and the highest shear bond strength was presented in acid-etched group, 7.10 +/- 1.86 MPa (P < .05). CONCLUSION: Laser- etched group exhibited significantly higer bond strength than that of control group, while still weaker than that of the phosphoric acid-etched group.
Collodion
;
Dental Caries
;
Dentin
;
Diamond
;
Molar
;
Phosphoric Acids
;
Plastics
;
Tooth
;
Water
3.A comparison of fracture strengths of porcelain-fused-to-titanium crown among titanium surface coating treatments.
Ji Hye KIM ; Sang Won PARK ; Mong Sook VANG ; Hong So YANG ; Ha Ok PARK ; Hyun Pil LIM ; Gye Jeong OH ; Hyun Seung KIM ; Kwang Min LEE ; Kyung Ku LEE
The Journal of Korean Academy of Prosthodontics 2007;45(2):203-215
STATEMENT OF PROBLEM: Titanium and its alloy, with their excellent bio-compatibility and above average resistance to corrosion, have been widely used in the field of dentistry. However, the excessive oxidization of titanium which occurs during the process of firing on porcelain makes the bonding of titanium and porcelain more difficult than that of the conventional metal-porcelain bonding. To solve this problem related to titanium-porcelain bonding, several methods which modify the surfaces, coat the surfaces of titanium with various pure metals and ceramics, to enable the porcelain adhesive by limiting the diffusion of oxygen and forming the adhesive oxides surfaces, have been investigated. PURPOSE: The purpose of this study was to know whether the titanium-porcelain bonding strength could be enhanced by treating the titanium surface with gold and TiN followed by fabrication of clinically applicable porcelain-fused-to-titanium crown. MATERIAL AND METHOD: The porcelain-fused-to-titanium crown was fabricated after sandblasting the surface of the casting titanium coping with Al2O3 and treating the surface with gold and TiN coating followed by condensation and firing of ultra-low fusing porcelain. To compare with porcelain-fused-to-titanium crowns, porcelain-fused-to-gold crowns were fabricated and used as control groups. The bonding strengths of porcelain-fused-to-gold crowns and porcelain-fused-totitanium crowns were set for comparison when the porcelain was fractured on purpose to get the experimental value of fracture strength. Then, the surface were examined by SEM and each fracturing pattern were compared with each other. RESULT: Those results are as follows. 1. The highest value of fracture strength of porcelain-fused-to-titanium crowns was in the order of group with gold coating, group with TiN coating, group with Al2O3 sandblasting. No statistically significant difference was found among the three (P>.05). 2. The porcelain-fused-to-gold crowns showed the highest value in bonding strength. The bonding strength of crowns porcelain-fused-to-titanium crowns of rest groups showed bonding strength reaching only 85%-94% of that of PFG, though simple comparision seemed unacceptable due to the difference in materials used. 3. The fracturing patterns between metal and porcelain showed mixed type of failure behavior including cohesive failure and adhesive failure as a similar patterns by examination with the naked eye and SEM. But porcelain-fused-to-gold crowns showed high incidence of adhesive failure and porcelain-fused-to-titanium crowns showed high incidence of cohesive failure. CONCLUSION: Above results proved that when fabricating porcelain-fused-to-titanium crowns, treating casting titanium surface with gold or TiN was able to enhance the bonding strength between titanium and porcelain. Mean value of masticatory force was found to showed clinically acceptable values in porcelain bonding strength in all three groups. However, more experimental studies and evaluations should be done in order to get better porcelain bonding strength and various surface coating methods that can be applied on titanium surface with ease.
Adhesives
;
Alloys
;
Bite Force
;
Ceramics
;
Corrosion
;
Crowns*
;
Dental Porcelain
;
Dentistry
;
Diffusion
;
Fires
;
Incidence
;
Metals
;
Oxides
;
Oxygen
;
Tin
;
Titanium*
4.Effect of surface roughness on bond strength in titanium-porcelain system.
Sang Hun KIM ; Mong Sook VANG ; Hong So YANG ; Sang Won PARK ; Ha Ok PARK ; Hyun Pil LIM ; Gye Jeong OH
The Journal of Korean Academy of Prosthodontics 2007;45(2):182-190
STATEMENT OF PROBLEM: Titanium has many advantages of high biocompatibility, physical properties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast for surface treatment prior to porcelain application, the researches are processing about the method of acid etching or surface coating. PURPOSE: The purpose of this research is to study the effect on bond strength of surface roughness between titanium and porcelain with the same surface topography. MATERIAL AND METHOD: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 8 groups - group P : polished with #1200 grit SiC paper, group S10 : 1.0 micrometer surface roughness with sandblasting, group S15 : 1.5 micrometer surface roughness with sandblasting, group S20 : 2.0 micrometer surface roughness with sandblasting, group S25 : 2.5 micrometer surface roughness with sandblasting, group S30 : 3.0 micrometer surface roughness with sandblasting, group S35 : 3.5 micrometer surface roughness with sandblasting, group E : 1.0 micrometer surface roughness with HCl etching. RESULTS: Within the confines of our research, the following results can be deduced. 1. In the results of 3-point bending test, the bond strength of sandblasting group showed significant differences from one of polishing group, acid etching group(P<.05). 2. The bond strength of sandblasting groups did not show significant differences. 3. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The bond strength of sandblasting group was higher than 25 MPa, the requirement of ISO 9693. CONCLUSION: In above results, bond strength of titanium and low-fusing porcelain is influenced more to surface aspect than surface roughness. And titanium has clinically acceptable bond strength below surface roughness of 3.5 micrometer.
Dental Porcelain
;
Titanium
5.The bond characteristics of porcelain fused by titanium surface modification.
Taek Huw CHOI ; Sang Won PARK ; Mong Sook VANG ; Hong So YANG ; Ha Ok PARK ; Hyun Pil LIM ; Gye Jeong OH ; Hyun Seung KIM ; Kwang Min LEE ; Kyung Ku LEE
The Journal of Korean Academy of Prosthodontics 2007;45(2):169-181
STATEMENT OF PROBLEM: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. PURPOSE: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. MATERIAL AND METHOD: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating(ParaOne(R), Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. RESULT: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, Al2O3 sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in Al2O3 sandblasted wrought titanium(28.6at.% --> 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.%--> 19.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see Au2Ti compound and TiN coating layers on Au and TiN coated surfaces and TiO2, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. CONCLUSION: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.
Adhesives
;
Corrosion
;
Crowns
;
Dental Porcelain*
;
Diagnosis
;
Diffusion
;
Fires
;
Hand
;
Oxygen
;
Tin
;
Titanium*
;
X-Ray Diffraction
6.Abnormalities of Liver Function during Total Parenteral Nutrition (TPN): Alteration of Serum Liver Enzyme during Short-term TPN.
Tae Hyun KIM ; Kyung Hyun CHOI ; Ki Young YOON ; Kyung Won SEO ; Dae Woo YOO ; Won Geun KANG ; Dong Won RYU ; Kyoung Chun LEE ; Eun Ae JUNG ; Sun Gye LIM ; Hong Seon KIM ; Kum Sook LEE ; Eun Sil KIM ; Su Mi AHN
Journal of the Korean Surgical Society 2002;63(5):409-415
PURPOSE: TPN has been widely used to treat nutritional depletion since the late 1960s. However, many metabolic complications may occur as a result of parenteral feeding. Among these, hepatic complications has received increasing attention. A retrospective review of liver function abnormalities in adult patients who underwent TPN was done to determine the frequency and magnitude of the abnormalities in a liver function test. METHODS: From January 2001 to Jun 2001, 160 adult patient receiving TPN were reviewed. Of these, 111 had a malignant disease and 49 had a benign disease. The duration of TPN therapy ranged from 5 days to 52 days, with a mean duration of 14 days. Abnormalities of liver function test were defined as a value greater than the upper normal limit. Forty cases of gastric cancer were analyzed to determine the risk factors that contribute to abnormal liver function in individual patients receiving TPN. RESULTS: Abnormalities of the liver function test appeared after 6~7 days of therapy. Increases in the ALP levels were noted in 34 out of 93 patients (37.6%), in the AST levels in 42 out of 116 patients (36.2%), in the ALT levels in 54 out of 125 patients (43.2%), in the LDH levels in 20 out of 72 patients (27.8%), in the gamma-GTP levels in 44 out of 81 patients (54.3%), and in the bilirubin levels in 30 out of 126 patients (23.8%). The serum ALP level rose to 1.6 times upper the limit of normal; AST, 1.7 times; ALT, 2.0 times; LDH, 1.2 times; gamma-GTP, 2.4 times; bilirubin, 2.4 times. gamma-GTP value was most sensitive. In 40 gastric cancers, factors as age, the amount of TPN solution, the duration of TPN, intraoperative chemotherapy, transfusion, and postoperative infection were investigated. However, no association with TPN-associated liver function abnormalities was found. CONCLUSION: The incidences of an abnormal liver function during TPN were 23.8~54.3%. However, the liver function abnormalities that developed during short term-TPN were reversible and not serious.
Adult
;
Bilirubin
;
Drug Therapy
;
Humans
;
Incidence
;
Liver Function Tests
;
Liver*
;
Parenteral Nutrition
;
Parenteral Nutrition, Total*
;
Retrospective Studies
;
Risk Factors
;
Stomach Neoplasms
7.Initial nutritional status of stomach cancer patients.
Su Mi AHN ; Ki Young YOON ; Eun Sil KIM ; Won Geun KANG ; Dong Won RYU ; Tae Hyun KIM ; Kyung Hyun CHOI ; Eun Ae JUNG ; Sun Gye LIM ; Hong Seon KIM ; Kum Sook LEE ; Jong Suck KIM ; Sun Og LEE
Journal of the Korean Dietetic Association 2002;8(3):217-226
The purpose of this study is to investigate initial nutritional status of stomach cancer patients. The study subjects were 88 patients with stomach cancer admitted at Kosin University Gospel Hospital in Busan. We assessed the initial nutritional status by anthropometric, biochemical and dietary intake data along with subjective global assessment(SGA). The results are as follows. 1. The mean age, weight, height, triceps skinfold thickness, mid arm circumference, and mid arm muscle circumference of the subjects were 55.9+/-11.0years, 60.0+/-9.8kg, 162.4+/-8.5cm, 10.9+/-5.7mm, 26.8+/-3.8cm, and 23.4+/-3.5cm respectively. The mean body mass index was within the normal range, with 22.7+/-2.8kg/m2, while 15.4% of the patients was underweight. The result shows that body fat mass and body protein mass of the patients with stomach cancer were decreased. 2. The mean biochemical data of the subjects were 4.0+/-0.5g/dl for albumin, 174.7+/-41.9mg/dl for cholesterol, 107.6+/-57.2mg/dl for triglyceride, 92.1microgram/dl for Zn, 297.0+/-103.1mg/dl for transferrin, 1980.0+/-0.8mm3 for total lymphocyte count. 3. Daily energy intake was 1997.8+/-579.3kcal. And the ratio of carbohydrate, protein, and lipid to energy intake was 72:14:14. 4. The patients were divided into three groups according to SGA performed by an observer. Group A(well nourished) was 55.7% with 49 patients, Group B(moderately malnourished) was 22.7 % with 20 patients, and Group C(severely malnourished) was 21.6 % with 19 patients. The three groups showed a significant difference in body weight(p<0.01), 1 month weight loss %(p<0.001), 6 months weight loss %(p<0.001), body mass index(p<0.01), and mid arm circumference(p<0.05), albumin(p<0.01), energy intake(p<0.05) as well as carbohydrate intake(p<0.05). From these results, it may be concluded that SGA can be used as a nutrition screening tool, and comprehensive nutrition assessment is desirable for those malnourished.
Adipose Tissue
;
Arm
;
Body Mass Index
;
Busan
;
Cholesterol
;
Energy Intake
;
Humans
;
Lymphocyte Count
;
Mass Screening
;
Nutrition Assessment
;
Nutritional Status*
;
Reference Values
;
Skinfold Thickness
;
Stomach Neoplasms*
;
Stomach*
;
Thinness
;
Transferrin
;
Triglycerides
;
Weight Loss
8.Pernicious Anemia: A Retrospective Analysis of 22 Cases.
Jae Min CHUN ; Nam Sook PARK ; Nam Hwan PARK ; Gak Won YUN ; Young Joon YANG ; Sang Eun PARK ; Hwan Jung YUN ; Deog Yeon JO ; Gye Cheol KWON ; Samyong KIM
Korean Journal of Hematology 2005;40(4):219-225
BACKGROUND: Pernicious anemia is the most common cause of vitamin B12 deficiency in western populations, but to date, only case reports or small series dealing with this malady have been reported in Korea. This study describes the clinical characteristics of pernicious anemia in Koreans. METHODS: We retrospectively analyzed the clinical data for twenty-two Korean patients with pernicious anemia who were diagnosed during the period from 1995 to 2004 at Chungnam National University Hospital. RESULTS: Only two patients were diagnosed before 2000. The median age of the patients was 66 years and the male/female ratio was 1.8. Anemia-associated discomfort was the most common symptom (95.5%); this was followed by gastrointestinal and neurological symptoms (77.2% and 50.0%, respectively). Autoimmune disorders were found in five patients (22.7%). The median hemoglobin level was 7.0g/dL (range: 3.1~11.8g/dL) and pancytopenia was found in 12 patients (54.5%). The median serum vitamin B12 Level was 26pg/mL (range: 12~189pg/mL). Fifteen (78.9%) and eight (42.1%) of the 19 patients who underwent tests for antibodies were positive for anti-intrinsic factor and anti-parietal cell antibody, respectively. Nineteen of 21 patients who were treated with intramuscular cobalamin recovered from their cytopenia within 3 months. The gastrointestinal symptoms resolved completely for all the patients, while neurological symptoms remained for some of the patients. CONCLUSION: This study shows that the clinical features of pernicious anemia in Koreans are not different from those of the western cases. In addition, pernicious anemia is not a rare finding in Korea.
Anemia, Pernicious*
;
Antibodies
;
Chungcheongnam-do
;
Humans
;
Korea
;
Pancytopenia
;
Retrospective Studies*
;
Vitamin B 12
;
Vitamin B 12 Deficiency