Phylloides tumor is very similar to giant fibroadenoma in that they have benign appearance in breast radiologic image. Fibroadenoma has no malignant potential, but phylloides tumor is locally recurrent, invasive and may occasionally metastasize. It thus appears that evaluation of the differential point of the two tumor groups by radiologic study is very important. We retrospectively compared sonographic find;.ngs of 6 cases of phylloides tumor with those of 4 cases of fibroadenoma, which proved pathologically in Ye mgnam University Hospital from 1984 to 1986. The mean age of the patients were 31.8 years old(from 14 to 41 years old) in phylloides tumor and 28.8 years old (from 17 to 40 years old) in giant fibroadenoma, respectively. The viewpoints of this analysis were size, shape and contour of the masses, internal echo pattern, posterior enhancement, and especially the existence of peripheral cyst or septal band echo. We found that diffenentiation of these two tumors by sonography was difficult. But peripheral cyst was found only in phylloides tumor and septal band echo was found largely in giant fibroadenoma. Although the existence of peripheral cyst or septal band echo in the breast mass was not pathognomonic findings, we suggest that the existence of septal band echo is preferential finding to fibroadenoma, and peripheral cyst is preferential finding to phylloides tumor.
Breast ; Diagnosis, Differential* ; Fibroadenoma* ; Humans ; Retrospective Studies ; Ultrasonography

Primary malignant laryngeal lymphoma is rare. In this case, diffuse wall thickening of the vocal cord and infraglottic larynx was seen on initial CT scan. After chemotherapy, follow-up CT neck scans showed a marked decrease of diffuse wall thickening of the vocal cord and infraglottic larynx ; diffuse laryngeal wall thickening is, however, a nonspecific finding which can be seen in other disease processes. If clinical evidence of infection and inflammation or remarkable change after antibiotics treatment is not definite, biopsy should be performed to rule out laryngeal lymphoma.
Anti-Bacterial Agents ; Biopsy ; Drug Therapy ; Follow-Up Studies ; Inflammation ; Larynx* ; Lymphoma* ; Neck ; Tomography, X-Ray Computed ; Vocal Cords

STATEMENT OF PROBLEM: Although zirconium oxide ceramics are more and more commonly used in restorative dentistry, for many clinical applications only limited data can be found in the literature. However, it is quite clear that hydrofluoric acid etching is impossible with zirconia ceramics. Therefore, other bonding techniques are required in order to lute these materials adhesively. PURPOSE: The purpose of this study was to evaluate the effects of surface treatments on shear bond strengths between two resin cements and a zirconia ceramic. MATERIALS AND METHODS: Experimental industrially manufactured yttrium-oxide-partially-stabilized zirconia ceramic discs (Adens, Korea) were used for this study. The ceramic specimens divided into five experimental groups and a control group (as received). Five surface treatments were studied. 1) sandblasting with 110 micrometer Al2O3 at 3 bars pressure 13 seconds at a distance of 10mm, 2) flame-treated with the Silano-Pen for 5 s/cm2, 3) grinding with a diamond bur, 4) sandblasting + Silano-Pen treatment, 5) diamond bur preparation+ Silano-Pen treatment. Acrylic plastic tube (5 mm in height and 3 mm in diameter) were filled with composite to fabricate composite cylinders. The composite cylinders were bonded to the ceramic specimens with either Superbond C & B or Panavia F resin luting agents. All cemented specimens were tested under shear loading until fracture on universal testing machine at a crosshead speed 1mm/min, the maximum load at fracture was recorded. Shear bond strength data were analyzed with oneway analysis of variance and Tukey HSD tests (p<.05). Treated ceramic surfaces and fracture surfaces after shear testing were examined morphologically using scanning electron microscope. Results: Ceramic surface treatment with Silano-Pen after sandblasting improved the bond strength of Superbond C & B resin cement. Superbond CandB resin cement at Silano-Pen after sandblasting(27.4 +/- 3.8 MPa) showed statistically higher shear bond strength than the others. CONCLUSION: Within the limitation of this study, Superbond C & B resin cement are suitable for cementation of zirconia ceramics and flame-treated with the Silano-Pen after sandblasting is required to enhance the bond strength.
Cementation ; Ceramics* ; Dental Cements ; Dental Instruments ; Dentistry ; Hydrofluoric Acid ; Plastics ; Resin Cements* ; Zirconium

STATEMENT OF PROBLEM: Ceramic restorations should be made of porcelain layers of different opacity, shade, and thickness in order to provide a natural appearance. Lithium disilicate glassceramic system has superior color reproducibility, because it uses the ceramic ingot which is similar to teeth shade and uses the staining technique and layering technique. However, staining technique has a fault of discoloration. Also, porcelain is divided core and dentin layer, it is not enough to study about the influence of porcelain layer thickness and shade on the shade of ceramic restorations. PURPOSE: The purpose of this study was to evaluate the influence of porcelain layer thickness and color on the final shade of ceramic restorations. MATERIALS AND METHOD: The CIE L*a*b*(CIELAB) values of 72 assembled specimens, each consisting of 3 discs (enamel porcelain 0.2 mm/dentin porcelain - 1.2, 0.9, 0.7, 0.5 or 0.3 mm/ceramic core - 0.3, 0.5, 0.7, 0.9 or 1.2 mm, diameter is 1.0 mm) were evaluated with a spectrophotometer (Model Chromaview 300, Spectron Tech Co, Korea) for the shade A1, A2, A3 and A4. Distilled water (refractive index: 1.7) was used to attain optical contact between the layers. White, white gray, and white brown backgrounds were used to assess the influence of the background on the final shade. And the mean color difference value(delta E) was calculated. RESULTS AND CONCLUSION: The results obtained from this study were as follows. 1. There was a significant correlation between the thickness ratio of the ceramic core/dentin porcelain system and L*, a* and b* values when the total thickness of specimen combination was smaller than 1.4 mm( p<0.05). 2. The specimen which the ceramic core thickness was more than 0.7 mm had the best masking effect against background colors. 3. The mean color difference value(delta E) is smaller than 2 (delta E<2) when the ceramic core thickness was larger than 0.7 mm and the total thickness of specimen was more than 1.4 mm.
Ceramics* ; Dental Porcelain* ; Dentin ; Lithium ; Masks ; Tooth ; Water

-D- is a very rare haplotype which determines D without C, c, E or e and exalted D activity. The extremely rare homozygote propositi(-D-/-D-) are usually ascertained through their immune antibodies which react with red cells of all common Rh phenotypes. Authors experienced a woman with -D- phenotype for the first time in Korea. She had a history of abortion and intrauterine fetal death. She delivered a baby with severe hemolytic disease of the newborn at the third pregnancy. In spite of intensive medical interventions, the baby died of hydrops fetalis. An immune antibody to high incidence Rh antigen, namely anti-Hro, was demonstrated in the woman's serum. Family study revealed that all of the family had -D- gene complex and one of her sisters also was -D-homozygote. The sister also had anti-Hro in the serum.
Antibodies ; Female ; Fetal Death ; Haplotypes ; Homozygote ; Humans ; Hydrops Fetalis ; Incidence ; Infant, Newborn* ; Korea ; Phenotype* ; Pregnancy ; Siblings

PURPOSE: The purpose of this study was to explain differences of cesarean section rates according to San-Yin-Jiao(SP6) acupressure for women in labor. METHOD: A noneqivalent control group pre test - post test design was used to explain differences of cesarean section rates according to SP6 acupressure. The participants were 209 women who were assigned to one of three groups SP6 acupressure(n=86), SP6 touch(n=47), and control group(n=76). For 30 minutes, the SP6 acupressure group received SP6 acupressure,and the SP6 touch group received SP6 touch for the duration of each uterine contraction. The Control group was encouraged to deep breath and relax for the duration of each uterine contraction for 30 minutes. RESULT: The rates of cesarean section were 12.8%, 29.8%, and 22.4% for the SP6 acupressure group, SP6 touch group, and control group respectively. There was a significant difference among groups (p=0.049). Cesarean section rateswere significantly different between the SP6 acupressure and non-SP6 acupressure group(p=0.035). CONCLUSION: This finding shows that 30 minutes of SP6 acupressure was effective in decreasing the cesarean section rate. Therefore, SP6 acupressure during labor could be applied as an effective nursing intervention.
*Acupressure ; Cesarean Section/*statistics & numerical data ; Female ; Humans ; Labor Pain/*therapy ; Pregnancy

Cutis laxa is a rare disorder of the elastic tissue characterized by loosely hanging and folded skin giving a premature senile appearance, often with internal organ involvement. Recently, we experienced a case of cutis laxa in a neonate. The patient who presented with dyspnea and loose skin at birth was delivered by Cesarean section in our hospital. He was the third baby of his mother and his siblings had no problem including skin. Physical examination on admission revealed a dyspneic neonate with skin showing loose folds, wrinkles and sagging over the face, neck, trunk and thighs. He had no family history of skin disease suggestive of cutis laxa. Histopathologic study of the skin specimen showed widespread breakdown and decreased number of elastic fibers with granular degeneration, shortening, and fragmentation. He had been dependent on ventilatory support throughout his hospital course and finally succumbed to intractable pulmonary emphysema at the age of 220 days.
Cesarean Section ; Cutis Laxa* ; Dyspnea ; Elastic Tissue ; Female ; Humans ; Infant, Newborn ; Mothers ; Neck ; Parturition ; Physical Examination ; Pregnancy ; Pulmonary Emphysema* ; Siblings ; Skin ; Skin Diseases ; Thigh

PURPOSE: To compare the mammographic features and histologic subtypes of ductal carcinoma in situ(DCIS) of the breast. MATERIALS AND METHODS: Mammograms of 34 patients with DCIS of the breast detected between January 1992 and November 1998 were retrospectively analyzed. Histologic subtypes were classified as either comedo or noncomedo. Mammographic findings were classified in one of four ways : microcalcification only, microcalcification with mass, mass or asymmetrical density only, or normal. Microcalcifications was classified as either predominantly casting or granular. We also determined whether microcalcification was multifocal. RESULTS: Histologic examination revealed the comedo type in eight patients and the noncomedo type in 26. Among the eight comedo-type cases, mammography demonstrated microcalcification only in five and micro-calcification with mass in three. Among 26 noncomedo-type cases, microcalcifications only was seen in ten, microcalcification with mass in two, mass or asymmetrical density only in six, and normal features in eight. Six of the comedo type were predominantly casting and two were predominantly granular. Predominantly casting calcification was present in four of 12 cases of the noncomedo type and predominatly granular was in eight. Multifocality was seen in four comedo-type cases, but in none of those that were of the noncomedo type. CONCLUSION: We conclude that the comedo subtype of DCIS of the breast is more likely than the noncomedo subtype to be accompanied by microcalcification of the predominantly casting type. Multifocally located microcalcification is a more frequent feature of the comedo subtype than of the noncomedo subtype.
Breast ; Carcinoma, Ductal* ; Carcinoma, Intraductal, Noninfiltrating* ; Humans ; Mammography ; Retrospective Studies

No abstract available.
Animals ; Mice* ; Premature Birth*

STATEMENT OF PROBLEM: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. PURPOSE: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. MATERIAL AND METHODS: Forty-five sample disks(15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPSEmpress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabricated. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions: (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm); (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE L*a*b* systems and color difference(delta E) was calculated. RESULTS: 100 shade ingot: when ceramic thickness was 1.0mm, delta E value for ceramic post larger than 1 but delta E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only delta E value for metal was larger than 2, and the other samples' delta E value was smaller than 2. For ceramic thickness of 2.0mm, E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, delta E value for ceramic post was smaller than 1 but delta E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the delta E value for metal was larger than 2, and the other samples' delta E value was smaller than 2. For ceramic thickness of 2.0mm, delta E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only delta E value for metal was larger than 2 and the other samples' delta E value was smaller than 2. For ceramic thickness of 1.5mm, delta E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, delta E values for all specimens was smaller than 1. CONCLUSION: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.
Ceramics ; Crowns* ; Esthetics ; Hot Temperature ; Masks ; Reading ; Tooth