Objective: To investigate the correlation among α2, 6-sialyltransferase (ST6Gal-Ⅰ), CD36 desialylation, and caveolin-1 (Cav-1) in phorbol ester (PMA)-induced MEG-01 cell model, as well as their potential mechanism in immune thrombocytopenia (ITP). Methods: MEG-01 cells were treated with 10 ng/mL PMA for 48 hours (control group: 0.1% DMSO). Flow cytometry was used to detect cell surface markers: desialylation (CD41 RCA ) and α2, 6-sialylation (CD41 SNA ). Western blot was performed to analyze the protein expressions of ST6Gal-Ⅰ, CD36, and Cav-1. Results: Flow cytometry analysis revealed that, compared with the control group (set as 100%), the proportion of CD41 RCA positive cells in the MEG-01 cells after PMA intervention significantly increased to (127.79±2.01)%, while the proportion of CD41 SNA positive cells significantly decreased to (78.09±1.76)% (both P<0.05). Western blot analysis results showed that, compared with the control group, PMA intervention significantly downregulated the expression of ST6Gal-Ⅰ protein (0.602±0.023 vs 0.768±0.068) and Cav-1 protein (1.012±0.028 vs 1.253±0.068) (both P<0.05), while significantly upregulating the expression of CD36 protein (0.936±0.033 vs 0.694±0.070, P<0.05). Conclusion: PMA can significantly inhibit the expression of ST6Gal-Ⅰ, accompanied by increased desialylation (β-galactose exposure), elevated CD36, and downregulated Cav-1. These changes suggest that the increased exposure of CD36 antigen and the disorder of membrane microenvironment may be involved in the pathological process of ITP, providing a new direction for mechanism research.

BACKGROUND:For dislocation of acromioclavicular joint induced by coracoclavicular ligament fracture,single EndoButton Plate reconstruction and double EndoButton Plates reconstruction are common repair methods.Further study on the stress distribution and fracture risk of the two repair methods is of great significance. OBJECTIVE:To study the biomechanical properties of the coracoclavicular ligament,and compare the fixation effect,stress distribution and failure mode of single and double EndoButton Plates reconstruction. METHODS:(1)Finite element simulation analysis:Mimics,Wrap and SolidWorks were used to establish normal coracoclavicular ligament,single EndoButton Plate reconstruction and double EndoButton Plates reconstruction.Ansys software was used to analyze the stress and deformation of the scapula and clavicle of each model under vertical load.(2)Sample experiment:Fifteen intact scapular-clavicle specimens were randomly grouped into five groups,with three specimens in each group.In group A,the acromioclavicular ligament was severed and the coracoclavicular ligament remained intact.In group B,acromioclavicular ligaments and trapeoid ligaments were severed,leaving intact conical ligaments.In group C,acromioclavicular ligaments and conical ligaments were cut off,and the intact traprex ligaments were retained.In group D,acromioclavicular and coracoclavicular ligaments were severed,and coracoclavicular ligaments were repaired by single EndoButton Plate reconstruction.In group E,acromioclavicular and coracoclavicular ligaments were severed,and the coracoclavicular ligaments were repaired by double EndoButton Plates reconstruction.The mechanical experiment was carried out by a mechanical testing machine to analyze the biomechanical status,stress distribution and failure patterns of the scapular-clavicle and clavicle. RESULTS AND CONCLUSION:(1)Finite element simulation analysis:The average stress of coracoclavicular ligament attached specimens was the lowest,and the risk of coracoclavicular fracture was less than that of single and double EndoButton Plates reconstruction.The mean stress of the coracoid process was similar in single and double EndoButton Plates reconstruction,and the fracture risk was similar.(2)Sample experiment:In groups A,B,C,D and E,the stiffness of specimens was(26.4±3.5),(19.8±2.8),(21.3±3.2),(57.7±4.1),and(46.2±2.8)N/mm,respectively;the ultimate loads were(545.5±53.7),(360.1±42.1),(250.9±44.4),(643.5±39.1),and(511.9±31.7)N,respectively;global stiffness in groups D and E was higher than that in group A(P=0.000 06,0.000 3);ultimate load in group D was higher than that in group A(P<0.05);the ultimate load was not significantly different between the group E and group A(P>0.05).Ligament fracture was observed in groups A,B and C and coracoid process fracture was found in groups D and E.(3)These results suggest that from the biomechanical analysis,Single EndoButton Plate reconstruction and double EndoButton Plates reconstruction are effective treatment techniques for coracoclavicular ligament fracture in acromioclavicular joint dislocation,but increase the risk of fracture.The double EndoButton Plates reconstruction dispersed the stress of the steel plate and reduced the contact force between the steel plate and bone,but slightly reduced the ultimate bearing capacity.Single and double EndoButton Plates reconstruction should be selected according to the actual clinical situation.

BACKGROUND:The stability of the pelvis is mainly determined by the posterior pelvic ring and the sacroiliac joint.The posterior pelvic ring injury and the dislocation of the sacroiliac joint caused by high energy impacts such as car accidents increase year by year.Surgical treatment is the best method,and there are many kinds of endophytorepair methods in clinical practice,but which treatment method has the best biomechanical properties is still controversial. OBJECTIVE:To compare the biomechanical properties of three kinds of internal implants:anterior double plates,posterior bridging plate and tension nail in the repair of unilateral unstable pelvic posterior ring injury,to provide a reference for the clinical treatment and development of a new pelvic tension screw. METHODS:(1)Finite element simulation:Mimics,Wrap and SolidWorks were used to establish normal pelvic model,unilateral injured pelvis model,and three kinds of internal implant repaired models(anterior double plates,posterior bridging plate and tension nail).Ansys was used to analyze the stress and deformation of the models.(2)Biomechanical test:A total of 15 intact pelvic specimens were randomly grouped into five groups,normal pelvic model,unilateral injured pelvis model,anterior double plates,posterior bridging plate and tension nail groups.The mechanical test was performed using an Instron E10000 testing machine. RESULTS AND CONCLUSION:(1)Simulation:In the normal pelvic model,the average displacement of the sacrum was 0.174 mm,and the maximum stress of the sacral iliac bone was 10.51 MPa,and the stress distribution was uniform.The mean sacral displacement of the unilateral injured pelvis model was 0.267 mm,and the stress concentration of the model was obvious.The mean displacement of the sacrum in the three repaired models was close to that in the normal pelvic model,and the stress distribution of the sacral iliac bone in the tension nail repaired model was uniform.(2)Mechanical test:The stiffness of the normal pelvic model was(226.38±4.18)N/mm,and that of the unilateral unstable pelvic model was the smallest(130.02±2.19)N/mm.The deviation of the normal pelvic model stiffness and the three repaired models'stiffness were all within(±10%),and the repair effect was obvious.(3)The simulation results were in agreement with the experimental results.(4)The biomechanics of the tension nail repaired model was the most similar to that of the normal pelvis,and this method was the best.The repairing stiffness of the anterior double plate was too large,and the stress shielding effect was more significant.The posterior bridging plate repair could not solve the compensatory effect of the normal side soft tissue and had defects.This study provides an optimal basis for clinical surgery.(5)The new type of pelvic tension nail should be improved from the point of view of the tension nail to retain the good biomechanical properties of the tension nail,while adding other advantages,such as being used for the osteoporotic pelvis.

Objective To evaluate the bioequivalence and safety of ezetimibe tablets in healthy Chinese subjects.Methods The study was designed as a single-center,randomized,open-label,two-period,two-way crossover,single-dose trail.Subjects who met the enrollment criteria were randomized into fasting administration group and postprandial administration group and received a single oral dose of 10 mg of the subject presparation of ezetimibe tablets or the reference presparation per cycle.The blood concentrations of ezetimibe and ezetimibe-glucuronide conjugate were measured by high-performance liquid chromatography-tandem mass spectrometry(HPLC-MS/MS),and the bioequivalence of the 2 preparations was evaluated using the WinNonlin 7.0 software.Pharmacokinetic parameters were calculated to evaluate the bioequivalence of the 2 preparations.The occurrence of all adverse events was also recorded to evaluate the safety.Results The main pharmacokinetic parameters of total ezetimibe in the plasma of the test and the reference after a single fasted administration:Cmax were(118.79±35.30)and(180.79±51.78)nmol·mL-1;tmax were 1.40 and 1.04 h;t1/2 were(15.33±5.57)and(17.38±7.24)h;AUC0-t were(1 523.90±371.21)and(1 690.99±553.40)nmol·mL-1·h;AUC0-∞ were(1 608.70±441.28),(1 807.15±630.00)nmol·mL-1·h.The main pharmacokinetic parameters of total ezetimibe in plasma of test and reference after a single meal:Cmax were(269.18±82.94)and(273.93±87.78)nmol·mL-1;Tmax were 1.15 and 1.08 h;t1/2 were(22.53±16.33)and(16.02±5.84)h;AUC0_twere(1 463.37±366.03),(1 263.96±271.01)nmol·mL-1·h;AUC0-∞ were(1 639.01±466.53),(1 349.97±281.39)nmol·mL-1·h.The main pharmacokinetic parameters Cmax,AUC0-tand AUC0-∞ of the two preparations were analyzed by variance analysis after logarithmic transformation.In the fasting administration group,the 90％CI of the log-transformed geometric mean ratios were within the bioequivalent range for the remaining parameters in the fasting dosing group,except for the Cmax of ezetimibe and total ezetimibe,which were below the lower bioequivalent range.The Cmax of ezetimibe,ezetimibe-glucuronide,and total ezetimibe in the postprandial dosing group was within the equivalence range,and the 90％CI of the remaining parameters were not within the equivalence range for bioequivalence.Conclusion This test can not determine whether the test preparation and the reference preparation of ezetimibe tablets have bioequivalence,and further clinical trials are needed to verify it.

Objective To deeply explore the principles of drug combinations in the treatment of vitiligo by traditional Chinese medicine master XUAN Guo-Wei by data mining technology,and to analyze the potential mechanism of action of the core drug pairs by network pharmacology.Methods The original case records of Professor XUAN Guo-Wei in treating vitiligo were compiled,and then TCM inheritance Computing Platform was used to analyze the frequency of drugs in the prescriptions,the association rules between drugs,and the core combinations of drugs by the association rule method,and the core drug pairs of Professor XUAN Guo-Wei's treatment of vitiligo were obtained based on the results of the data mining,additionally,the mechanism of the core pairs of drugs was analyzed by using the method of network pharmacology.Results A total of 243 prescriptions were collected,among which the high-frequency drugs were Glycyrrhizae Radix et Rhizoma,Tribuli Fructus,Ecliptae Herba,Cuscutae Semen,Scrophulariae Radix,Angelicae Dahuricae Radix,etc.,and the core pair was Tribuli Fructus-Ecliptae Herba.The main components of Tribuli Fructus-Ecliptae Herba for the treatment of vitiligo were quercetin,kaempferol,etc.,there were 47 targets for the intersection of the active ingredients with the disease,among which TP53,TNF,IL-1β,CASP3,VEGFA,PTGS2,IL10,IL2,IFNG,and IL4 may be the core targets for the treatment of vitiligo by Tribuli Fructus-Ecliptae Herba.The main pathways of Tribuli Fructus-Ecliptae Herba drug pairs against the disease were PI3K-Akt signaling pathway,NF-κB signaling pathway,JAK-STAT signaling pathway and MAPK signaling pathway.Conclusion The core drug pair of Professor XUAN Guo-Wei in the treatment of vitiligo is Tribuli Fructus-Ecliptae Herba,which involves targets such as TP53,TNF,IL-1β,CASP3,VEGFA,PTGS2,IL10,IL2,IFNG,IL4,etc.,Tribuli Fructus-Ecliptae Herba drug pair maybe exert an effect in the treatment of vitiligo through PI3K-Akt signaling pathway,NF-κB signaling pathway,JAK-STAT signaling pathway and MAPK signaling pathway.

Objective To investigate the biomechanical properties of a novel sacroiliac lag screw with a spiral blade.Methods Percutaneous sacroiliac lag screws were used as the controls.Polyurethane material was used to simulate the trabecular bone,and the pullout resistance performance was tested on an Instron mechanical testing machine.Subsequently,pelvic specimens were utilized to analyze the static stiffness and dynamic stability of the novel sacroiliac lag screw in repairing sacroiliac joint injuries under normal standing conditions,with normal pelvis,single-sided sacroiliac joint injury pelvis,percutaneous sacroiliac lag screw-single screw repair,and percutaneous sacroiliac lag screw-double screw repair as controls.Results The damage to the polyurethane material after screw extraction was smaller in the novel sacroiliac lag screw group.The average effective holding displacement of the novel sacroiliac lag screw was significantly greater than that of the percutaneous sacroiliac lag screw(P＜0.05).However,the maximum resistance to the pullout force for the percutaneous sacroiliac lag screw was significantly higher than that for the novel sacroiliac lag screw(P＜0.05).The stiffness after repair of sacroiliac joint injuries was significantly higher when using a single sacroiliac lag screw than when using two percutaneous sacroiliac lag screws(P＜0.05).The displacement amplitude was the highest in the sacroiliac joint injury group,followed by that in the normal group.The displacement amplitudes in the other groups were similar;however,the differences were statistically significant(P＜0.05).The dynamic stability of the sacroiliac lag screw repair group was the best,slightly better than that of the percutaneous sacroiliac lag screw-double screw repair group,and the dynamic stability of the sacroiliac joint injury group was the worst.The novel sacroiliac lag screw effectively repaired the sacroiliac joint injuries.Conclusions The novel sacroiliac lag screw can effectively hold the trabecular bone and has practical clinical utility.

Objective To investigate the risk factors for bronchopulmonary dysplasia(BPD)in twin preterm infants with a gestational age of<34 weeks,and to provide a basis for early identification of BPD in twin preterm infants in clinical practice.Methods A retrospective analysis was performed for the twin preterm infants with a gestational age of<34 weeks who were admitted to 22 hospitals nationwide from January 2018 to December 2020.According to their conditions,they were divided into group A(both twins had BPD),group B(only one twin had BPD),and group C(neither twin had BPD).The risk factors for BPD in twin preterm infants were analyzed.Further analysis was conducted on group B to investigate the postnatal risk factors for BPD within twins.Results A total of 904 pairs of twins with a gestational age of<34 weeks were included in this study.The multivariate logistic regression analysis showed that compared with group C,birth weight discordance of>25%between the twins was an independent risk factor for BPD in one of the twins(OR=3.370,95%CI:1.500-7.568,P<0.05),and high gestational age at birth was a protective factor against BPD(P<0.05).The conditional logistic regression analysis of group B showed that small-for-gestational-age(SGA)birth was an independent risk factor for BPD in individual twins(OR=5.017,95%CI:1.040-24.190,P<0.05).Conclusions The development of BPD in twin preterm infants is associated with gestational age,birth weight discordance between the twins,and SGA birth.

Objective To explore the clinical efficacy of high hip center technique total hip arthroplasty(THA)for CroweⅡ and Ⅲ developmental dysplasia of hip(DDH)and severe hip osteoarthritis(HOA).Methods From January 2018 to Jan-uary 2020,74 patients with Crowe type Ⅱ and Ⅲ DDH and severe HOA were admitted,and 37 cases of anatomical hip center reconstruction were taken as control group,including 7 males and 30 females,aged from 42 to 65 years old with an average of(58.40±4.98)years old,body mass index(BMI)ranged from 18 to 29 kg·m-2 with an average of(23.02±2.21)kg·m-2.Thirty-seven routine high hip center technical reconstruction were performed as study group,including 5 males and 32 females,aged from 41 to 65 years old with an average of(57.31±5.42)years old,BMI ranged from 18 to 29 kg·m-2 with an average of(23.14±2.07)kg·m-2.The patients presented with hip pain,limited function and range of motion,and gait instability before surgery.All patients underwent THA,the control group underwent intraoperative anatomical hip center reconstruction,and the study group underwent intraoperative high hip joint reconstruction.The perioperative indicators of the two groups were com-pared.The hip joint function,balance function and gait of the patients were evaluated before surgery,3 months,6 months,and 12 months after surgery.The length difference of both lower limbs,horizontal distance of rotation center,vertical distance of ro-tation center and femoral eccentricity were measured before operation and 1 year after operation.The incidence of complica-tions in the two groups during the operation and postoperative follow-up was counted.Results The operation time of the study group was shorter than that of the control group,and the intraoperative blood loss was less than that of the control group(P＜0.05).After 12-months follow-up,1 was lost to followvup in study group and 2 were lost to follow-up in control group.The Har-ris scores and Berg balance scale(BBS),pace,stride frequency and single step length in the study group were higher than those in the control group at 3 months and 6 months after operation(P＜0.05);there was no statistically significant difference between the two groups in the indexes 12 months after operation(P＞0.05).The vertical distance of the center of rotation of the study group was greater than that of the control group 12 months after operation(P＜0.05),and there was no significant difference in the length difference of the lower limbs,the horizontal distance of the center of rotation,and the femoral eccentricity between two groups(P＞0.05).There were no complications in either group.Conclusion The long-term effects of TH A in patients with DDH and severe HO A were similar between the two central hip reconstruction methods,and the safety was good,and the high hip central reconstruction technique could shorten the operation time and reduce the amount of intraoperative blood loss.At the same time,it has certain advantages in early recovery of hip joint function,balance function and walking function of patients.

Objective To investigate the clinical efficacy of endoscopic pterygoid nerve combined with anterior ethmoidal nerve transection in treatment of allergic rhinitis with nasal polyps.Method A clinical practice study was conducted on 108 patients with allergic rhinitis complicated with nasal polyps.After enrollment,they were randomly divided into two groups,54 cases were included in the control group and treated with conventional endoscopic sinus surgery,while 54 cases were included in the observation group and treated with conventional endoscopic sinus surgery combined with pterygoid nerve and ethmoidal nerve transection.The nasal pain visual analogue scale(VAS),rhinoconjunctivitis quality of life questionnaire(RQLQ),asthma quality of life questionnaire(AQLQ),total effective rate,and complication rate of the two groups were compared before treatment and 1 week,2 weeks,3 weeks,3 months,6 months,and 1 year after treatment.Result Compared with the control group,the total effective rate of treatment was 98.15%in the observation group,which was higher than 85.19%in the control group,the difference was statistically significant(P<0.05).Before treatment,there were no significant differences in nasal resistance(NR),mucociliary transport rate(MTR),mucociliary transport time(MTT),and Lund-Kennedy scores between the two groups,the differences were no statistically significant(P>0.05).After treatment,MTR in two groups increased compared with before treatment,and the observation group was higher than the control group,the difference was statistically significant(P<0.05);NR,MTT,and Lund-Kennedy scores in two groups decreased,and the observation group was lower than the control group,the differences were statistically significant(P<0.05).Before treatment,there were no significant differences in nasal pain VAS,RQLQ,and AQLQ between the two groups,the differences were no statistically significant(P>0.05).After treatment,at 1 week,2 weeks,3 weeks,and 3 months,6 months,and 1 year,the observation group had lower nasal pain VAS compared to the control group,while the observation group had lower RQLQ and higher AQLQ compared to the control group,the differences were statistically significant(P<0.05).The incidence of complications in the observation group was lower than the control group,the difference was statistically significant(P<0.05).Conclusion The clinical efficacy of endoscopic pterygoid nerve combined with ethmoidal nerve transection for the treatment of allergic rhinitis complicated with nasal polyps is significant.It can not only effectively alleviate nasal pain in patients,but also improve their quality of life and reduce postoperative complications,which has clinical application value.

Objective:To explore the early effects and safety of using a hybrid fixation strategy with 3D-printed porous tantalum metal augments to reconstruct substantial bone defects in complex primary total knee arthroplasty (TKA).Methods:A retrospective analysis was performed on the clinical data from August 2019 to September 2023, encompassing 20 patients (21 knees) with significant bone loss who underwent hybrid fixation with 3D-printed porous tantalum augments. The procedures were conducted at two medical centers: the First Affiliated Hospital, School of Medicine, Zhejiang University (11 cases) and Xiangya Hospital of Central South University (9 cases). The study cohort comprised 6 males (6 knees) and 14 females (15 knees), with a mean age of 61.05±11.23 years (range, 42-80 years). The distribution of cases was 7 on the left side and 14 on the right side. All cases were categorized as type 3 according to the Anderson Orthopaedic Research Institute (AORI) classification system. The cohort included 19 unilateral and 1 bilateral case, with 5 involving complex primary replacements (3 with Charcot arthropathy, 1 with syphilitic arthropathy, and 1 with severe valgus deformity) and 16 revision surgeries (13 for aseptic loosening and 3 for infection). Preoperative assessments included routine CT scans and digital three-dimensional reconstructions to identify large metaphyseal defects exceeding 50% of the metaphyseal area or those thicker than 10 mm. For such defects, 3D-printed standardized porous tantalum augments were implemented. In cases of extensive cavitary bone defects or severe metaphyseal defects where the medial and lateral defects collectively exceeded 80% of the metaphyseal region or where the residual bone stock was insufficient for screw fixation of standardized augments, 3D-printed personalized custom-made porous tantalum augments were employed for hybrid fixation and repair. Comparative analyses were conducted on pre- and postoperative imaging data (prosthesis positioning and complications), knee range of motion (ROM), visual analogue scale (VAS) for pain, and Knee Society score (KSS).Results:Of the cases, 17 were repaired using standardized 3D-printed porous tantalum augments, while 4 underwent repairs with customized augments for hybrid fixation. Follow-up averaged 26.5±15.0 months (range, 12-62 months). There was a significant increase in knee ROM, improving from 72.8°±31.9° preoperatively to 113.2°±6.8° at 12 months postoperatively ( P<0.05). VAS scores decreased from 6.6±1.4 preoperatively to 2.5±1.0 at 12 months postoperatively ( P<0.05). Similarly, KSS improved from 52.8±6.4 preoperatively to 80.7±7.9 at 12 months postoperatively ( P<0.05). There were no incidences of prosthesis displacement, poor bone integration, or postoperative infections. Conclusion:The hybrid fixation strategy employing 3D-printed porous tantalum augments has been found to be effective in addressing significant bone defects in TKA. The follow-up results indicate a satisfactory biological integration of the porous tantalum metal augments with the host bone, which has resulted in substantial improvements in pain relief and knee joint functionality.