Objective To observe the prevention and treatment of the total flavonoids from Litchi chinensis Sonn( TFL) on hepatic fibrosis induced by dimethylnitrosamine(DMN)in rats, and to explore its mechanism. Methods Ninety SD rats were randomly divided into six groups, normal control group, model control group, colchicine group, high-, medium- and low-dose TFL group(n=15).Expect for normal control group, the other groups were given intraperitoneal injection of 2 mL.kg-1 of 5% dimethylnitrosamine for 4 weeks as the model group. The rats in the normal control group and model control group were given 5 mL.kg-1of 0.9% sodium chloride solution, colchicine group was treated with 0.1 mg.kg-1 colchicine.High-, medium-and low-dose TFL groups were given 200, 100 and 50 mg.kg-1 of TFL.The rats were sacrificed and the livers were harvested and stained with HE and Masson staining to observe pathological changes and liver fibrosis in the same part 6 weeks after all the medicine was given to the rats each day. Immunohistochemistry and Western blotting were used to detect the expression of the transforming growth factor β-Ⅰ/type Ⅱ receptor ( TβRⅠ/Ⅱ) , collagen Ⅰ( Col Ⅰ) and Ⅲ collagen ( Col Ⅲ) . Results Compared with the normal control group, the semiquantitative score of liver fiber and the protein expression of TβRⅠ, TβRⅡ, ColⅠ and Col Ⅲ in the model control group were significantly increased(P<0.01).Compared with the model control group, the protein expression levels of TβR, TβRⅡ, ColⅠand ColⅢwere significantly decreased( P<0.01) in the high-,medium-and low-dose TFL group.The semiquantitative score of liver fiber was significantly decreased( P<0.01) with a dose-effect relationship. Conclusion TFL can inhibit formation of DMN-induced liver fibrosis in rats, which may be related with reduction of expression of TβRⅠ/Ⅱ of hepatic fibrosis promoting factor TGF-β1 , inhibition of the activation and increase of hepatic stellate cells, reduction of the collagen content.

Objectives To investigate the changes of cystatin C in the serum of patients with acute kidney injury ( AKI) or end-stage renal disease ( ESRD), and study its significance in the early diagnosis of AKI and its correlation with the degree of renal function injury. Method The cases in Xiangya hospital were enrolled in this study according to the RIFLE criteria, including 20 cases of slight acute kidney injury, 30 cases of medium-severe acute kidney injury, 48 cases of victims of the 5. 12 wenchuan earthquake, 32 cases of end-stage renal disease and 20 healthy patients. The microparticle-enhanced immunoturbidimetry method was used to detect serum cystatin C, and the colorimetric method was used to detect urine N-acetyl-beta-D-glucosaminidase (NAGase). The enzymic method was used to detect serum creatinine. The correlation between serum cystatin C and serum creatinine was analyzed, and the sensitivity and specificity of serum cystatin C were evaluated with the receiver operator characteristic curve (ROC curve). Results Compared with healthy control group, the serum cystatin C increased obviously in acute kidney injury group and ESRD group( P <0. 05 and P <0. 01). The serum cystatin C was positively correlated with serum creati-nine( P <0.01). The serum cystatin C in the 5. 12 wenchuan earthquake injured group was also higher than that in healthy control group ( P <0.05), an the serum cystatin C had an AUC - ROC of 0.931 ( P <0. 01). Conclusion Compared to the conventional biomarkers, the earlier emergence of serum cystatin C can contribute better to early clinical diagnosis of AKI. The serum cystatin C is positively correlated with renal function, and reflect changes in renal function accurately.

Objective To understand the effect of the three-cell latrine and B-type tilted ellipsoid methane tank for eliminating eggs of schistosome in different seasons and temperatures in order to evaluate their values for popularization and application in schistosomiasis endemic areas.Methods The eggs of schistosome collected from infected rabbits were put into the three-cell latrines and methane tanks in different seasons.The miracidia were observed and counted after collecting the eggs for hatching experiments on the 5th,10th,15th,20th,25th,30th,40th,50th,and 60th day,respectively.Results In the three-cell latrine,the time of eliminating eggs completely in the fecal residue in winter,spring(autumn),and summer was 50,30,15 days,respectively,and the time of completely eliminating 100 eggs of schistosome was 40,20,10 days,respectively.Correspondingly,in the methane tank,the time of eliminating eggs completely in the fecal residue in winter,spring(autumn),and summer was 30,15,10 days,respectively,and the time of completely eliminating 100 eggs of schistosome was 20,15,5 days,respectively.Conclusions The three-cell latrine and B-type tilted ellipsoid methane tank could effectively eliminate schistosome eggs in human and animal excreta and achieve the national hygienic standard on night soil in the endemic areas of Jiangxi Province.

OBJECTIVETo compare the surface roughness of nanofilled dental composite resin and microhybrid composite resins after curing and polishing.

METHODSA nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from the lateral to the medial layers to prepare 8 mm×8 mm×5 mm cubical specimens. The 4 lateral surfaces of each specimens were polished with abrasive disks (Super-Snap). Profilometer was used to test the mean surface roughness (Ra) after polishing.

RESULTSP60 had the lowest Ra (0.125∓0.030 µm) followed by Z250 and Spectrum. The Ra of Z350 (0.205∓0.052 µm) was greater than that of the other 3 resins, and AP-X had the roughest surfaces. Under scanning electron microscope, the polished faces of P60 resin were characterized by minor, evenly distributed particles with fewer scratches; the polished faces of Z350 presented with scratches where defects of the filling material could be seen.

CONCLUSIONThe nanofilled composite Z350 has smooth surface after polishing by abrasive disks, but its smoothness remains inferior to that of other micro-hybrid composite resins.

Objective: To investigate the feasibility and clinic outcome of the turbocharging technique in repairing large defect with free perforator flap. Methods: From January 2017 to December 2018, 6 patients with defect of over length or large size were repaired with free perforator flaps, anterolateral thigh(ALT) flap in 3 cases and deep inferior epigastric artery perforator(DIEP) flap in 3 cases in Department of Hand Surgery, Ningbo No.6 Hospital. There were 4 males and 2 females, aged from 29 to 54 years old, with an average age of 41 years old.It was found that the size of the flap beyond the perforasome, while multiple perforators in the flaps were not from the same pedicle. The turbocharging technique was applied in the operation. The distal perforator of the flap was anastomosed with the proximal pedicle branch. The flap size ranged from 20 cm×8 cm to 25 cm×12 cm. The donor sites were closed directly for 3 cases and skin grafting for 3 cases. Results: All the flaps survived successfully, no distal necrosis occurred. The patients were followed up for 3 to 12 months, with an average of 9 months. All flaps survived well with satisfactory appearance and pliable texture. The healing of skin graft was satisfactory in 3 cases in donor site. No graft skin contracture occurred. The donor sites closed directly in 3 cases had linear scar in donor site, no obvious contracture occurred. The flap sensation returned to S2-S3. Conclusions If the size of the flap is super long or large, beyond the perforasome, while multiple perforators in the flaps were not from the same pedicle, the application of turbocharging technique can avoid partial necrosis of the flap and improve the survival rate of the flap, which is an ideal alternative.

Objective To evaluate the effect of thermal cycling on surface microstructure of different light-curing composite resins. Methods A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from lateral to center to form cubic specimens. The lateral surfaces were abrased and polished before water storage and 40 000 thermal cycles (5/55℃). The mean surface roughness (Ra) were measured and compared before and after thermal cycling, and the changes of microstructure were observed under scanning electron microscope (SEM). Results Significant decreases of Ra were observed in the composites, especially in Spectrum (from 0.164±0.024μm to 0.140±0.017μm, P<0.001) and Z250 (from 0.169 ± 0.035μm to 0.144 ± 0.033μm, P<0.001), whose Ra approximated that of P60 (0.121 ± 0.028μm) with smoothly polished surface. SEM revealed scratches and shallower pits on the surface of all the 5 resins, and fissures occurred on Z350 following the thermal cycling. Conclusions Water storage and thermal cycling may produce polishing effect on composite resins and cause fissures on nanofilled composite resins.

Objective To compare the surface roughness of nanofilled dental composite resin and microhybrid composite resins after curing and polishing. Methods A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from the lateral to the medial layers to prepare 8 mm×8 mm×5 mm cubical specimens. The 4 lateral surfaces of each specimens were polished with abrasive disks (Super-Snap). Profilometer was used to test the mean surface roughness (Ra) after polishing. Results P60 had the lowest Ra (0.125 ± 0.030 μm) followed by Z250 and Spectrum. The Ra of Z350 (0.205±0.052μm) was greater than that of the other 3 resins, and AP-X had the roughest surfaces. Under scanning electron microscope, the polished faces of P60 resin were characterized by minor, evenly distributed particles with fewer scratches;the polished faces of Z350 presented with scratches where defects of the filling material could be seen. Conclusion The nanofilled composite Z350 has smooth surface after polishing by abrasive disks, but its smoothness remains inferior to that of other micro-hybrid composite resins.

Objective To evaluate the effect of thermal cycling on surface microstructure of different light-curing composite resins. Methods A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from lateral to center to form cubic specimens. The lateral surfaces were abrased and polished before water storage and 40 000 thermal cycles (5/55℃). The mean surface roughness (Ra) were measured and compared before and after thermal cycling, and the changes of microstructure were observed under scanning electron microscope (SEM). Results Significant decreases of Ra were observed in the composites, especially in Spectrum (from 0.164±0.024μm to 0.140±0.017μm, P<0.001) and Z250 (from 0.169 ± 0.035μm to 0.144 ± 0.033μm, P<0.001), whose Ra approximated that of P60 (0.121 ± 0.028μm) with smoothly polished surface. SEM revealed scratches and shallower pits on the surface of all the 5 resins, and fissures occurred on Z350 following the thermal cycling. Conclusions Water storage and thermal cycling may produce polishing effect on composite resins and cause fissures on nanofilled composite resins.

Objective To compare the surface roughness of nanofilled dental composite resin and microhybrid composite resins after curing and polishing. Methods A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from the lateral to the medial layers to prepare 8 mm×8 mm×5 mm cubical specimens. The 4 lateral surfaces of each specimens were polished with abrasive disks (Super-Snap). Profilometer was used to test the mean surface roughness (Ra) after polishing. Results P60 had the lowest Ra (0.125 ± 0.030 μm) followed by Z250 and Spectrum. The Ra of Z350 (0.205±0.052μm) was greater than that of the other 3 resins, and AP-X had the roughest surfaces. Under scanning electron microscope, the polished faces of P60 resin were characterized by minor, evenly distributed particles with fewer scratches;the polished faces of Z350 presented with scratches where defects of the filling material could be seen. Conclusion The nanofilled composite Z350 has smooth surface after polishing by abrasive disks, but its smoothness remains inferior to that of other micro-hybrid composite resins.

Background In the context of global warming, the impact of meteorological factors on human health has gradually become a research hotspot at home and abroad. Objective To describe the distribution of children's bronchopneumonia in Huzhou City, and explore the influence of diurnal temperature range (DTR) on children with bronchopneumonia, so as to provide guidance for identifying vulnerable populations and developing targeted measures. Methods A distributed lag nonlinear model (DLNM) was used to explore the potential nonlinear lag effect of DTR on admission of children with bronchopneumonia in Huzhou City from 2014 to 2019. Then a generalized additive model (GAM) was used to calculate the hospital admission risk of exposure to DTR in total population and sex-, age-, season-stratified populations. Results A total of 17658 hospitalized children with bronchopneumonia were included in the study. When DTR exceeded 7.5 ℃, the relative risk rose abruptly. When DTR reached 17 ℃, the risk of admission to hospital of children with bronchopneumonia was the greatest. In terms of the single-day lag effect, the admission risk of DTR for bronchopneumonia in children began on the same day and persisted until lag day 2; it peaked on the same day, and RR was 1.353 (95%CI: 1.220-1.502). The cumulative lag effect occurred from lag0 to lag0-6, and the highest RR value was at lag0-3, which was 1.938 (95%CI:1.483-2.533). The results of stratified analysis showed that the maximum effect values for boys and girls appeared at lag0-3 (RR_boys=2.301, 95%CI: 1.671-3.169) and lag0-2(RR_girls=1.566, 95%CI: 1.152-2.129) respectively, and the effect value and duration of DTR in boys were higher and longer than those in girls. Among different age groups, both children of 0-3 years old and 4-14 years old had the maximum effect value at lag 0-3, the RR values were 1.734 (95%CI: 1.454-2.572) and 1.998 (95%CI: 1.226-2.254) respectively, and the effect value and duration of DTR on the children of 4-14 years old were higher and longer than those of the children of 0-3 years old. As to seasons, no significant increase was found in cumulative effect in summer and autumn (P>0.05); in winter and spring, the maximum effect value appeared at lag0-10, and the RR value was 4.164 (95%CI:1.191-14.561). Conclusion The impact of DTR on bronchopneumonia in children is acute. Boys and children aged 4-14 years old are more sensitive to DTR changes. Therefore, we should be alert to severe DTR changes and take protective measures in advance