Statistical analysis of TCM syndrome differentiation and clinical symptoms were made in 163 cases of diseases of digestive tract. It was found that the patients of abnormal defection or tendecy of abnormal defecation with the hyperactive liver - Qi attacking the spleen, stagnation of liver-Qi due to hypofunction of the spleen, loose stool due to deficiency of the spleen, constipation due to Qi-deficiency, constipation due to Qi - staganation syndromes accounted for 60%- 100%. Elecrtic examination of colon on the body surface and analysis of frequancy spectrum found that hyperelectroactivity of low - frequency and high - frequency segment of colon and contractive complex myoelectric hyperactivity in the patients of the hyperactive liver - Qi attacking the spleen; hyperelectroactivity of high - frequency segment of the ascending and descending colon and contractive complex myoelectric hyperactivity and decrease of electric activity of high - frequency segment of the sigmoid colon in the patients of loose stool due to hypofunction of the spleen: obvious decrease of electric activiy of low - frequency and high-frequency of the colon and contractive complex myoelectric hyperactivity in the patients of constipation due to deficiency of Qi or Qi - stagnation, but electric activity of the high -frequency segment of the colon and contractive complex myoelectric activity after meal in the patients of constipation due to Qi -stagnation was stronger than that in the patients of constipation due to Qi - deficiency. Electric frequency spectrum of colon can indirectly reflect changes of colon dynamics of different syndromes, and it can partially expain the changes of stool and the mechanism of relative symptoms.

In order to simultaneously remove carbon and nitrogen from organic-rich wastewater, we used an up-flow anaerobic sludge bed/blanket (UASB) reactor that was started up with anammox with high concentration of carbon and nitrogen by gradually raising the organic loading of influent. We optimized the removal of nitrogen and carbon when the chemical oxygen demand (COD) concentration varied from 172 to 620 mg/L. During the entire experiment, the ammonium and total nitrogen removal efficiency was higher than 85%, while the average COD removal efficiency was 56.6%. The high concentration of organic matter did not restrain the activity of anammox bacteria. Based on polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) and tapping sequencing analyses, the Planctomycete, Proteobacteria, Chloroflexi, Chlorobi bacteria are detected in the UASB reactor, which indicated complex removal pathway of carbon and nitrogen coexisted in the reactor. However, a part of Planctomycete which referred to anammox bacteria could tolerate a high content of organic carbon, and it provided help for high performance of nitrogen removal in UASB reactor.
Ammonia ; chemistry ; Biological Oxygen Demand Analysis ; Bioreactors ; Carbon ; chemistry ; Nitrogen ; chemistry ; Sewage ; Waste Disposal, Fluid ; methods ; Waste Water ; chemistry

To study the enrichment regulation of anammox bacteria during the whole start-up process of anammox reaction, two reactors with addition of carries of Spherical Plastic (SP) and Bamboo Charcoal (BC) and one without carrier (CK) were used to start anammox reaction. Then FISH and q-PCR analyses for the growth of all anammox bacteria were conducted during the operational process. The results indicate that the number of anammox bacteria in all reactors increased with time during the whole start-up process, which was consistent with the removal rate of ammonium and nitrite. On day 123 of stable phase, the percent of anammox cells in the sludge of CK, SP and BC accounted for 23.3%, 32.6% and 43.7%, respectively. The number of anammox bacteria 16S rRNA gene copies was (25.64 +/- 2.76) x 10(7), (47.12 +/- 2.76) x 10(7) and (577.99 +/- 27.25) x 10(7) copies g(-1) VSS in the sludge of CK, SP and BC, respectively. Carrier addition could dramatically increase enrichment of anammox bacteria. BC addition significantly increased the anammox bacteria number in the UASB reactor which resulted in the acceleration of the anammox start-up process. In addition, the max specific growth rate and the minimum doubling time were 0.064 d(-1) and 10.8 d in BC reactor. The max specific growth rate of anammox bacteria in BC reactor was 1.78 times and 1.88 times greater than that in CK and SP reactor, respectively. Therefore, the FISH and q-PCR analyses were suitable for determining the enrichment regulation of anammox bacteria during the start-up time, while a bit of differences in results existed between the two analytical methods due to the difference in analysis targets.
Ammonia ; metabolism ; Bacteria ; growth & development ; metabolism ; Bioreactors ; Industrial Microbiology ; Nitrites ; metabolism ; Oxidation-Reduction ; Sewage ; microbiology

0),whose mean calcification score was 1935.54(0～9833). Patients with calcification score ≥100 had significantly higher morbidity of cardiovascular diseases, serum phosphate level, calcium-phosphate product, C-reactive potein concentration and lower serum albumin than patients with calcification score

Objective To isolate and identify leukemia stem cells from acute myeloid leukemia patients for further research. Methods By Ficoll density gradient centrifugation, mononuclear cells were firstly separated from bone marrow of patients. According to specific surface markers, CD+34 CD+123 of leukemic stem cells were sorted by flow cytometer. Their ability of self-renewal and differentiation were evaluated by colony formation and cobblestone forming ability. At the same time, the purity and cell morphology of CD+34 CD+123 cells was analysed. Results Comparared with total mononuclear cells, the proportion of the CD+34 CD+123 cells after sorting was 10.7 %, and these cells showed the ability of colony forming and cobblestone forming, and the purity proportion of CD+34 CD+123 cells was 62.1%. Conclusion The leukemia stem cells were isolated successfully and could be used in further study.

ObjectiveTo study effect of Herba Erigerontis on metabolites in cerebral ischemia rats with high-resolution magic angle spinning 1H nuclear magnetic resonance spectroscopy(HR MAS 1H NMR). Methods18 male Wistar rats, weighing 150～200 g, were randomly divided into 3 groups such as normal (n=6), ischemia (n=6), Herba Erigerontis treatment (n=6). Rat ischemia model was established with middle cerebral artery occlusion (MCAO), reperfusing or dosed with Herba Erigerontis after 3 h ischemia. The metabolites, including N-acetylaspartate (NAA), creatine (Cre), choline (Cho), glutamate (Glu), and aspartate (Asp) etc., of cerebra and cerebella was observed using HR MAS 1H NMR. ResultsExcluding Cho, Glu, Asp, the concentrations of most metabolites of rat brain during ischemia were significantly lower than that of normal rats, and could be increased after drug treatment. ConclusionHerba Erigerontis shows positive effect on metabolites in cerebral ischemia rats.

BACKGROUND:To decrease operation amount of finite element analysis and increase its clinical practice,previous studies explored the material properties and 10 kinds of material attributes were assigned,which met the requirements of finite element analysis.Moreover,it can be used to calculate bone density.OBJECTIVE:To explore a method for measurement of bone density based on three-dimensional reconstruction and finite element analysis.METHODS:A total of 11 specimens of femoral superior segment were selected.The mass of control group was firstly measured.The experimental groups were treated with thin-slice high resolution CT scan and three-dimensional reconstruction in Mimics 10.0,volume meshing in Ansys,assigned with 10,100 and 400 kinds of material attributes Mimics,exported to Ansys to calculat the volumes of the block elements of every types of material attributes.The mass and the density of the specimens was harvested according to the empirical formula concerning the gray value and the bone density.All results were treated with one-way ANOVA.RESULTS AND CONCLUSION:One-way ANOVA showed that there were no significant differences between control group and experimental groups assigned with 10,100 and 400 kinds of material attributes (P＞0.28),and there were no significantly among the experimental groups (P＞0.8).Results show that the method was able to measure the mass and the density of bone quantitatively,as well as the proportion between compact bone and cancellous bone;to assign 10 kinds of material attributes to three-dimensional model of femur could match the needs for measurements.The results can be used as an initial preparation for the unification of bone density and finite element analysis for osteoporosis.

BACKGROUND:Based on previously theoretical derivation,it thought that assignment with 10 kinds of material attributes to three-dimensional model of bone can match the needs of finite element analysis,however,whether the results is consistent with actual needs to be validated by experimental results.OBJECTIVE:Twelve specimens of femoral superior segment were used for finite element analysis,which were verified with results of biomechanical testing,to explore a reasonable method for material assignment of bone.METHODS:All 12 specimens of femoral superior segment were treated with CT scan,three-dimensional reconstruction in Mimics 10.0 and volume meshing in Ansys.The finite element analysis group was divided into 2 kinds (compact bone and cancellated bone),10,50,100,200,400 kinds of material attributes groups based on the gray value.All models were assigned with material attributes and tested in Ansys for mechanics data of nodes on surface of femoral neck.In biomechanical testing group,12 specimens of femoral superior segment were treated with compressed testing to harvest mechanics data of measuring point same as that of finite element analysis group.RESULTS AND CONCLUSION:The one-way analysis of variance showed that the differences between the biomechanical testing group and finite element analysis group of 2 kinds of material attributes had no obvious significance (P=0.082).Compared to the 10,50,100,200,400 kinds of material attributes group,the difference had no significance (P > 0.39).However,the differences between the 2 kinds of material attributes and the 10,50,100,200,400 kinds of material attributes in the finite element analysis group were obviously difference (P< 0.05),which was no difference in the 10,50,100,200,400 kinds of material attributes (P>0.9).The results demonstrated that to assign 10 kinds of material attributes to three-dimensional model of bone can match the needs of finite element analysis.

An iodine analysis instrument with sequential injection of urine samples was developed. A method for measurement of urine iodine was also developed by combining sequential injection and catalysis kinetics,and making use of catalysis facilitation of the iodine in the redox reaction of As~(3+) and Ce~(4+) . The sequential injection and stopped-flow stabilization determination were made possible by the program-controlled injector with controlled flow rate and the 16-hole program-controlled selection valves. The arsenic-cerium reaction with iodine-catalyzed at constant temperature state might proceed with the constant temperature flow cell. Using the syringes with program-controlled velocity,pushing and suction,Using the digital connected circuit and micro-iodine determination software,the reaction temperature of (32.0±0.1)℃,injection time of 45 s,stabilization time of 60 s,detection time of 20 s,injection volume of 400μL,linear range of 15 -600μg/L,detecting limitation of 5.01 μg/L(n=11) and recovery rate of 94. 1 % - 105. 1 % were obtained. With this method,the detecting result of the National Standard Reference (GBW09109 and GBW09110) materials was within a given standard range. Through this method,the detecting results had no significant differences comparing with those by standard method of National Health Service(P >0.05).

Objective To evaluate the effect of isoflurane preconditioning on autophagy during focal cerebral ischemia-reperfusion (I/R) injury in rats.Methods Thirty-six healthy male Sprague-Dawley rats,weighing 250-280 g,aged 7-8 weeks,were divided into 3 groups (n =12 each) using a random number table:sham operation group (group S),cerebral I/R group (group I/R) and isoflurane preconditioning group (group IP).Focal cerebral I/R was induced by 2 h middle cerebral artery occlusion followed by 24 reperfusion.Group IP inhaled 1.5％ isoflurane for 1 h per day for 5 consecutive days,the other two groups only inhaled 30％ oxygen,and focal cerebral I/R was induced at 24 h after the last inhalation.At 24 h of reperfusion,neurologic deficit was assessed and scored,the rats were then sacrificed,and brains were removed for determination of cerebral infarct size (using triphenyl tetrazolium chloride staining) and expression of microtubule-associated protein 1 light chain 3-Ⅱ (LC3-Ⅱ) and Beclin-1 (by Western blot).Results Compared with group S,the neurologic deficit scores and cerebral infarct size were significantly increased,and the expression of hippocampal LC3-Ⅱ and Beclin-1 was significantly up-regulated in I/R and IP groups (P＜0.05).Compared with group I/R,the neurologic deficit scores and cerebral infarct size were significantly decreased,and the expression of hippocampal LC3-Ⅱ and Beclin-1 was significantly upregulated in group IP (P ＜ 0.05).Conclusion The mechanism by which isoflurane preconditioning ameliorates focal cerebral I/R injury is related to enhancement of autophagy in the rats.