CD44 is a family of transmembrane glycoproteins involved in cell-cell and cell-matrix interactions. Expression of CD44 isofonns (splice variants) has been shown to be associated with poor prognosis in several human cancers. We evaluated the expression patterns of the CD44 isofortn (CD 44 splice variant v6) in infiltrating ductal carcinoma of the breast by immunohistochemical and RT-PCR method. Paraffin embedded blocks from seventy-five cases of mastectomized samples were analyzed immunohistochemically using monoclonoal antibody against CD44v6. CD44v6 was detected in fifty-seven cases (76%) of the tumor samples. Adjacent normal myoepithelial cells and ductal epithelial cells revealed focal positive reaction to CD44v6. Thirtytwo cases (80.0%) with lymph nodal metastasis revealed overexpression of CD44v6 monoclonal antibody, but twenty-five cases (71.4%) without nodal metastasis also showed positive reaction to CD44v6 monoclonal antibody, and there is no statistically significant value. Other prognostic factors of infiltrating ductal carcinoma, such as tumor size, histologic grade and hormonal receptors did not show any significant correlation with CD44v6 expression. The RT-PCR studies for 9 cases of infiltrating ductal carcinoma showed the same band patterns both in the normal and tumor tissues. From the above results, it is concluded that the expression of CD44v6 is not a valuable prognostic marker of infiltrating ductal carcinoma of breast.
Breast* ; Carcinoma, Ductal* ; Epithelial Cells ; Glycoproteins ; Humans ; Neoplasm Metastasis ; Paraffin ; Prognosis

We report a patient with pachydermoperiostosis accompanied by hypertrophic gastritis. A 26-year-old man showed deep folds and furrows of the face and scalp, and terminal spade-like expansion of fingers and toes. Physical examination revealed no abnormalities except a grotesque appearance. Results of routine laboratory tests were unremarkable. Mild periosteal reactoins of both femurs and humeri were noted on long bone series, and hypertrophic gastritis on fibroscopic examination drew our attention. The relationship between pachydermoperiostosis and hypertrophic gastritis is uncertain. However it is probable that hypertrophic gastritis may be the endodermal counterpart of the ectodermal manifestations of pachydermoperiostosis.
Adult ; Ectoderm ; Endoderm ; Femur ; Fingers ; Gastritis, Hypertrophic* ; Humans ; Osteoarthropathy, Primary Hypertrophic* ; Physical Examination ; Scalp ; Toes

Deep skin and soft tissue defects with exposed bone and tendon is difficult to treat, because skin graft rarely survives and flap surgery is sacrifice of donor site. Since "Stage I" membrane was developed by Yannas and Bruke in 1980, numerous kinds of artificial skin have been developed. The adaptability of "Terudermis", developed by the Terumo Co., as an artificial skin composed of sponge made of a fibrillar atelocollagen and a heat-denatured atelocollagen, was clinically evaluated on application to 13 cases presenting deep skin and soft tissue defect with exposed bones and tendons from October 1997 to march 1998. Terudermis has the advantage of allowing early incorporation of fibroblasts and capillaries into its collagen sponge due to very weak dehydrothermal cross-linking. Before Terudermis graft, several days of wet dressing and debridement were required to prepare healthy well-vascularized bed because Terudermis was weak on unsanitary wounds. After bed preparation, Terudermis was grafted like usual skin graft. Tie-over bolster dressing or compressive dressing was used case by case. The dressing was opened 2~3 days after Terudermis grafting. Wet dressing was done daily until the skin graft was done. Autologous skin graft was done 2-3 weeks after Terudermis graft. Our clinical results indicated that Terudermis was beneficial in treating 77% of our patients. Through the use of this new method, treatment of severe skin and soft tissue defects that are usually treated by musculocutaneous or other conventional skin flaps can be replaced by Terudermis as an new artificial dermis.
Bandages ; Capillaries ; Collagen ; Debridement ; Dermis ; Fibroblasts ; Humans ; Membranes ; Porifera ; Skin ; Skin, Artificial ; Tendons ; Tissue Donors ; Transplants ; Wounds and Injuries*

No abstract available.
Citrullinemia*

PURPOSE: The aim of this study was to examine the relationship between tooth loss and sub-clinical atherosclerosis in Korean adults. MATERIALS AND METHODS: The subjects were part of a cohort study conducted in Ansan city by the Korea University medical school as part of the Korean Genome project. 749 subjects over than 40 years old were evaluated. After taking panoramic radiography, the amount of tooth loss was calculated. The intima-media thickness (IMT) was assessed by using ultrasonography at the common carotid artery. Traditional cardiovascular risk factors for atherosclerosis were also evaluated. The relationship between tooth loss and the IMT was evaluated using ANOVA with Scheffe's multiple comparison method in univariate analysis. Multiple regression analysis was also performed to determine the significance between the IMT and tooth loss. RESULTS: With age, tooth loss increased, but there was no significant increase in other traditional cardiovascular risk factors. Univariate analysis revealed the IMT to be positively related with the amount of tooth loss. Regression analysis of the IMT in the anterior and posterior tooth loss revealed that only the posterior tooth loss was significantly related with the IMT at all sites of the common carotid artery (right far wall, P = .015; left far wall, P = .008; right near wall, P < .001; left near wall, P = .001). CONCLUSION: This study verified the positive relationship between the increased tooth loss at the posterior area and the accumulation of atheroma in arteries.
Adult ; Arteries ; Atherosclerosis ; Carotid Artery, Common ; Carotid Intima-Media Thickness ; Cohort Studies ; Genome ; Humans ; Korea ; Plaque, Atherosclerotic ; Radiography, Panoramic ; Risk Factors ; Schools, Medical ; Tooth ; Tooth Loss

PURPOSE: To evaluate the accuracy of a model made using the computer-aided design/computer-aided manufacture (CAD/CAM) milling method and 3D printing method and to confirm its applicability as a work model for dental prosthesis production. MATERIALS AND METHODS: First, a natural tooth model (ANA-4, Frasaco, Germany) was scanned using an oral scanner. The obtained scan data were then used as a CAD reference model (CRM), to produce a total of 10 models each, either using the milling method or the 3D printing method. The 20 models were then scanned using a desktop scanner and the CAD test model was formed. The accuracy of the two groups was compared using dedicated software to calculate the root mean square (RMS) value after superimposing CRM and CAD test model (CTM). RESULTS: The RMS value (152±52 µm) of the model manufactured by the milling method was significantly higher than the RMS value (52±9 µm) of the model produced by the 3D printing method. CONCLUSION: The accuracy of the 3D printing method is superior to that of the milling method, but at present, both methods are limited in their application as a work model for prosthesis manufacture.
Dental Models ; Dental Prosthesis ; Methods ; Printing, Three-Dimensional ; Prostheses and Implants ; Tooth

PURPOSE: Accurate information is essential in dentistry. The image information of missing teeth is used in optically based medical equipment in prosthodontic treatment. To evaluate oral scanners, the standardized model was examined from cases of image recognition errors of linear discriminant analysis (LDA), and a model that combines the variables with reference to ISO 12836:2015 was designed. MATERIALS AND METHODS: The basic model was fabricated by applying 4 factors to the tooth profile (chamfer, groove, curve, and square) and the bottom surface. Photo-type and video-type scanners were used to analyze 3D images after image capture. The scans were performed several times according to the prescribed sequence to distinguish the model from the one that did not form, and the results confirmed it to be the best. RESULTS: In the case of the initial basic model, a 3D shape could not be obtained by scanning even if several shots were taken. Subsequently, the recognition rate of the image was improved with every variable factor, and the difference depends on the tooth profile and the pattern of the floor surface. CONCLUSION: Based on the recognition error of the LDA, the recognition rate decreases when the model has a similar pattern. Therefore, to obtain the accurate 3D data, the difference of each class needs to be provided when developing a standardized model.
Dentistry ; Tooth

No abstract available.
Stomach Neoplasms*

PURPOSE: This study is to evaluate the internal fit of the crown manufactured by CAD/CAM milling method and 3D printing method. MATERIALS AND METHODS: The master model was fabricated with stainless steel by using CNC machine and the work model was created from the vinyl-polysiloxane impression. After scanning the working model, the design software is used to design the crown. The saved STL file is used on the CAD/CAM milling method and two types of 3D printing method to produce 10 interim crowns per group. Internal discrepancy measurement uses the silicon replica method and the measured data are analyzed with One-way ANOVA to verify the statistic significance. RESULTS: The discrepancy means (standard deviation) of the 3 groups are 171.6 (97.4) µm for the crown manufactured by the milling system and 149.1 (65.9) and 91.1 (36.4) µm, respectively, for the crowns manufactured with the two types of 3D printing system. There was a statistically significant difference and the 3D printing system group showed more outstanding value than the milling system group. CONCLUSION: The marginal and internal fit of the interim restoration has more outstanding 3D printing method than the CAD/CAM milling method. Therefore, the 3D printing method is considered as applicable for not only the interim restoration production, but also in the dental prosthesis production with a higher level of completion.
Crowns* ; Dental Prosthesis ; Methods ; Printing, Three-Dimensional* ; Silicon ; Stainless Steel

A 44-year-old man, who had a history of myocardial infarction (MI) due to thrombotic occlusion of right coronary artery (RCA) aneurysm, visited emergency department presenting with ST-segment elevation myocardial infarction (STEMI). The patient had been on oral anticoagulant therapy (warfarin) from the first thrombotic event, but the medication had been recently changed to aspirin 4 months before the second event. Emergent coronary angiography revealed thrombotic total occlusion of RCA with heavy thrombotic burden from middle RCA to the ostium of the posterior descending branch. Combination pharmacotherapy was performed with anticoagulants (heparin), fibrinolytics (urokinase), and Glycoprotein IIb/IIIa antagonists (abciximab), in addition to mechanical thrombosuction. However, on hospital day 2, the patient complained recurrent chest pain and again underwent coronary angiography, which revealed distal embolization of large thrombus to the posterior lateral branch. Coronary flow was recovered after repeated mechanical thrombosuction was performed. This case has shown the importance of aggressive combination drug therapy, accompanied by mechanical thrombosuction in patient with myocardial infarction due to thrombotic occlusion of coronary artery aneurysm and the importance of unceasing life-long anticoagulant therapy in those particular patients.
Adult ; Aneurysm* ; Anticoagulants ; Aspirin ; Chest Pain ; Coronary Aneurysm ; Coronary Angiography ; Coronary Occlusion* ; Coronary Vessels* ; Drug Therapy ; Drug Therapy, Combination ; Emergency Service, Hospital ; Glycoproteins ; Humans ; Myocardial Infarction* ; Thrombectomy ; Thrombosis ; Warfarin*