PURPOSE: To compare of quantitative measurement of the total cerebral blood flow using two-dimensional phase-contrast MR imaging and Doppler ultrasound. MATERIALS AND METHODS: In 16 volunteers (mean age, 26 years; mean body weight, 66 kg) without abnormal medical histories, two-dimensional phase-contrast MR imaging was performed at the level of the C2-3 intervertebral disc for flow measurement of the internal carotid arteries and the vertebral arteries. Volume flow measurements using Doppler ultrasound were also performed at the internal carotid arteries 2 cm above the carotid bifurcation, and at the vertebral arteries at the level of the upper pole of the thyroid gland. Flows in the four vessels measured by the two methods were compared using Wilcoxon's correlation analysis and the median score. Total cerebral blood flows were calculated by summing these four vessel flows, and mean values for the 16 volunteers were calculated. RESULTS: Cerebral blood flows measured by 2-D phase-contrast MR imaging and Doppler ultrasounds were 233 and 239 ml/min in the right internal carotid artery, 250 and 248 ml/min in the left internal carotid artery, 62 and 56 ml/min in the right vertebral artery, and 83 and 68 ml/min in the left vertebral artery. Correlation coefficients of the blood flows determined by the two methods were 0.48, 0.54, 0.49, and 0.62 in each vessel, while total cerebral blood flows were 628+/-68 (range, 517 to 779) ml/min and 612+/-79 (range, 482 to 804)ml/min, respectively. CONCLUSION: Total cerebral blood flow was easily measured using 2-D phase-contrast MR imaging and Doppler ultrasound, and the two noninvasive methods can therefore be used clinically for the measurement of total cerebral blood flow.
Body Weight ; Carotid Artery, Internal ; Intervertebral Disc ; Magnetic Resonance Imaging* ; Thyroid Gland ; Ultrasonography* ; Vertebral Artery ; Volunteers

Bone Plates ; Cervical Vertebrae/surgery* ; Diskectomy ; Spinal Fusion ; Titanium ; Treatment Outcome ; Vertebral Body

OBJECTIVE: To investigate the risk factors of vertebral refracture after percutaneous kyphoplasty (PKP) for osteoprotic vertebral compression fractures (OVCFs), and to provide reference for clinical prevention. METHODS: A retrospective analysis of 228 OVCFs patients who met the inclusion criteria admitted from November 6, 2013 to December 14, 2018. There were 35 males and 193 females, with a male-to-female ratio of 3∶20, and aged 58 to 91 years with an average of (69.70±7.03) years. All patients were treated with PKP and had complete clinical data. According to whether refracture occurred after operation, they were divided into refracture group (24 cases) and non refracture group (204 cases). Factors that may be related to refracture (including gender, age, surgical segment, number of vertebral bodies in the surgical segment, whether combined with degenerative scoliosis, whether anti-osteoporosis treatment) were included in the univariate analyses, and the single factor analysis of statistically significant risk factors was carried out with multiple Logistic regression analysis to further clarify the independent risk factors for vertebral body refracture after PKP. Survival analysis was performed using the time of vertebral refracture after PKP as the end time of follow up, the occurrence of refracture after PKP as the endpoint event, and the presence or absence of degenerative lateral curvature as a variable factor. RESULTS: All 228 patients were followed up for 1.8 to 63.6 months with an average of (28.8±15.6) months, and the refracture rate was 10.5%(24/228). There were statistically significant differences between two groups in age, number of operative vertebral bodies, whether combinedwith degenerative scoliosis and whether anti osteoporosis treatment ( CONCLUSION Combined scoliosis is an independent risk factor for refracture after OVCFs vertebroplasty, and it is also a possible high-risk factor for refracture after surgery.
Female ; Fractures, Compression/surgery* ; Humans ; Kyphoplasty/adverse effects* ; Male ; Osteoporotic Fractures ; Retrospective Studies ; Risk Factors ; Spinal Fractures/surgery* ; Vertebral Body

OBJECTIVE: To investigate whether 3D-printed artificial vertebral body can reduce prosthesis subsidence rate for patients with cervical chordomas, through comparing the rates of prosthesis subsidence between 3D printing artificial vertebral body and titanium mesh for anterior spinal reconstruction after total spondylectomy. METHODS: This was a retrospective analysis of patients who underwent surgical treatment for cervical chordoma at our hospital from March 2005 to September 2019. There were nine patients in the group of 3D artificial vertebral body (3D group), and 15 patients in the group of titanium mesh cage (Mesh group). The patients' characteristics and treatment data were extracted from the medical records, including age, gender, CT hounsfield unit of cervical vertebra and surgical information, such as the surgical segments, time and blood loss of surgery, frequency and degree of prosthesis subsidence after surgery. Radiographic observations of prosthesis subsidence during the follow-up, including X-rays, CT, and magnetic resonance imaging were also collected. SPSS 22.0 was used to analysis the data. RESULTS: There was no significant difference between the two groups in gender, age, CT hounsfield unit, surgical segments, time of surgery, blood loss of posterior surgery and total blood loss. Blood loss of anterior surgery was 700 (300, 825) mL in 3D group and 1 500 (750, 2 800) mL in Mesh group (P < 0.05). The prosthesis subsidence during the follow-up, 3 months after surgery, there was significant difference between the two groups in mild prosthesis subsidence (P < 0.05). The vertebral height of the 3D group decreased less than 1 mm in eight cases (no prosthesis subsidence) and more than 1 mm in one case (mild prosthesis subsidence). The vertebral height of the Mesh group decreased less than 1 mm in five cases (no prosthesis subsidence), and more than 1 mm in eight cases (mild prosthesis subsidence). Two patients did not have X-rays in 3 months after surgery. There was a statistically significant difference between the two groups in the prosthesis subsidence rate at the end of 12 months (P < 0.01). The vertebral height of eight cases in the 3D group decreased less than 1 mm (no prosthesis subsidence) and one case more than 3 mm (severe prosthesis subsidence). Four of the 15 cases in the Mesh group decreased less than 1 mm (no prosthesis subsidence), two cases more than 1 mm (mild prosthesis subsidence), and nine cases more than 3 mm (severe prosthesis subsidence). There was a statistically significant difference between the two groups in the prosthesis subsidence rate at the end of 24 months (P < 0.01). The vertebral height of seven cases in the 3D group decreased less than 1 mm (no prosthesis subsidence), one case more than 3 mm (severe prosthesis subsidence), and one case died with tumor. One case in the Mesh group decreased less than 1 mm (no prosthesis subsidence), one case more than 1 mm (mild prosthesis subsidence), 11 case more than 3 mm (severe prosthesis subsidence), one case died with tumor and one lost the follow-up. Moreover, at the end of 12 months and 24 months, there was significant difference between the two groups in severe prosthesis subsidence rate (P < 0.01). CONCLUSION 3D-printed artificial vertebral body for anterior spinal reconstruction after total spondylectomy for patients with cervical chordoma can provide reliable spinal stability, and reduce the incidence of prosthesis subsidence after 2-year follow-up.
Humans ; Chordoma/surgery* ; Retrospective Studies ; Vertebral Body ; Titanium ; Cervical Vertebrae/surgery* ; Printing, Three-Dimensional ; Spinal Fusion/methods* ; Treatment Outcome

Objective The morphological data of the second thoracic vertebra and the third lumbar vertebra were measured by computerized tomography （CT）. The sex differences were analyzed and the discrimination equation was obtained. Methods The data of 274 adults （203 cases from experimental group and 69 cases from validation group） from central China were collected. Four linear data （maximum transverse length of vertebral body, maximum longitudinal length of vertebral body, maximum transverse length of vertebral foramen, maximum longitudinal length of vertebral foramen）, one angle data （angle between spinous processes） and two area （vertebral foramen area, total cross-sectional area of vertebral body） data of the second thoracic vertebra and the third lumbar vertebra were collected, respectively. Then three ratios ［maximum transverse length/　maximum longitudinal length of vertebral body, maximum transverse length/ maximum longitudinal length of vertebral foramen, vertebral foramen area/ （total cross-sectional area of vertebral body-vertebral foramen area）］ and one angle （angle between spinous processes） were obtained. The discriminant equation was established for sexual discriminant analysis. Results The morphology of the second thoracic vertebra and the third lumbar vertebra was related with gender. Four single index discriminant formulae and eleven multi-index discriminant formulae were established. The 69 validation group samples were substituted into the formula for testing, and the maximum discriminant accuracy rate of the single-index discriminant formula was 75%. The maximum discriminant accuracy rate of multi-index discriminant formula was 83%. Conclusion It is feasible to conduct individual sex analysis by the morphological indexes of second thoracic vertebra and the third lumbar vertebra. The indexes have important application values in practice.
China ; Female ; Lumbar Vertebrae/diagnostic imaging* ; Male ; Thoracic Vertebrae/diagnostic imaging* ; Tomography, X-Ray Computed ; Vertebral Body

OBJECTIVE: To explore the relationship between spinous process deviation and lumbar disc herniation in young patients. METHODS: From March 2015 to January 2022, 30 treated young (under the age of 30) patients with lumbar disc herniation were included as the young group. In addition 30 middle-aged patients (quinquagenarian group) with lumbar disc herniation and 30 patients with non-degenerative spinal diseases (young non-degenerative group) were selected as control groups. The angle of the spinous process deviation was measured on CT and statistically analyzed by various groups. All the data were measured twice and the average value was taken and recorded. RESULTS: The average angle of spinous process deviation in the degenerative lumbar vertebra of young patients were (3.89±3.77) degrees, similar to the (3.72±2.98) degrees of quinquagenarian patients(P=0.851). The average angle of s spinous process deviation young non-degenerative group were (2.20±2.28) degrees, significantly less than young group(P=0.040). The spinous process deviation angle of the superior vertebral of the degenerative lumbar in the young group was (4.10±3.44) degrees, which similar to the (3.47±2.87) degrees in the quinquagenarian group (P=0.447). A total of 19 young patients had the opposite deviation direction of the spinous process of the degenerative lumbar vertebra and upper vertebra, while only 7 quinquagenarian patients had this condition(P=0.02). The type of lumbar disc herniation in young patients had no significant relationship with the direction of spinous process deflection of the degenerative or upper lumbar vertebra (P>0.05). CONCLUSION Spinous process deviation is a risk factor of young lumbar disc herniation patients. If the deviation directions of adjacent lumbar spinous processes are opposite, it will increase the incidence of lumbar disc herniation in young patients. There was no significant correlation between the type of disc herniation and the deviation direction of the spinous process of the degenerative or upper lumbar vertebra. People with such anatomical variation can strengthen the stability of spine and prevent lumbar disc herniation through reasonable exercise.
Middle Aged ; Humans ; Intervertebral Disc Displacement/complications* ; Vertebral Body ; Spinal Diseases ; Spinal Fusion/adverse effects* ; Lumbar Vertebrae/diagnostic imaging* ; Intervertebral Disc Degeneration/etiology*

OBJECTIVE: To analyze the clinical characteristics of intervertebral disc tissue injury and herniation into the vertebral body in thoracolumbar fracture on fracture healing, vertebral bone defect volume and intervertebral space height. METHODS: From April 2016 to April 2020, a total of 140 patients with thoracolumbar single vertebral fracture combined with upper intervertebral disc injury treated with pedicle screw rod system reduction and internal fixation in our hospital. There were 83 males and 57 females, aged from 19 to 58 years old, with an average age of (39.33±10.26) years old. All patients were followed up regularly 6 months, 12 months and 18 months after surgery. The patients with injured intervertebral disc tissue not herniated into the fractured vertebral body were the control group, and the patients with injured intervertebral disc and herniated into the fractured vertebral body were the observation group. By detecting the thoracolumbar AP and lateral X-ray films, CT and MRI of the thoracolumbar segment at different follow-up time, calculate the changes of the wedge angle of the fractured vertebral body, the sagittal kyphosis angle and the height of the superior adjacent intervertebral space, the changes of the fracture healing and bone defect volume after the reduction of the vertebral body, and the changes of the intervertebral disc degeneration grade. The prognosis was evaluated by visual analogue scale(VAS) and Oswestry disability index(ODI). Finally, the differences of the above results among different groups were comprehensively analyzed. RESULTS: All the patients had normal wound healing without complications. A total of 87 patients received complete follow-up data, at least 18 months after internal fixation. Thoracolumbar AP and lateral X-ray films showed that 18 months after the reduction and internal fixation operation, the vertebral wedge angle, sagittal kyphosis angle and the height of the upper adjacent intervertebral space in the observation group were greater than those in the control group(P<0.05). CT scanning showed that the deformity of the fracture healed 12 months after the vertebral body reduction in the observation group and formed a "cavity" of bone defect connected with the intervertebral space, and its volume was significantly increased compared with that before (P<0.05). MRI scanning showed that the degeneration rate of injured intervertebral discs in the observation group was more serious than that in the control group 12 months after operation(P<0.05). However, there was no significant difference in VAS and ODI score at each time. CONCLUSION Herniation of injured intervertebral disc tissue hernias into the fractured vertebral body leads to increased bone resorption defect volume around the fracture and forms a malunion "cavity" connected with the intervertebral space. This may be the main reason for the change of vertebral wedge angle, the increase of sagittal kyphosis angle and the decrease of intervertebral space height after removal of internal fixation devices.
Male ; Female ; Humans ; Adult ; Middle Aged ; Young Adult ; Vertebral Body/injuries* ; Lumbar Vertebrae/injuries* ; Thoracic Vertebrae/injuries* ; Treatment Outcome ; Fractures, Bone ; Spinal Fractures/surgery* ; Fracture Fixation, Internal/methods* ; Pedicle Screws ; Kyphosis/surgery* ; Intervertebral Disc/surgery* ; Hernia ; Retrospective Studies