OBJECTIVECurrent study was conducted to investigate the seed physiological characteristics of Tulipa edulis and improve germination rate.

METHODAnatomical characteristics was observed. Seed water absorption curve was tested by soaking method. Dynamic of embryo development and germination rate as well as germination index under different conditions were recorded. And the biological test of cabbage seed was used for detecting the germination inhibitors.

RESULTThe embryo rate of newly matured seeds was about 10%, and there was no obstacle of water absorption on testa of T. edulis. The optimum method for embryo development was exposure to 300 mg x L(-1) gibberellin solution for 24 hours, and stratification at 25 degrees C for 70 days followed by stratification at 5 degrees C for 40 days. The germintion rate and germination index of dormancy-broken seeds under the dark environment at 10 degrees C and 15 degrees C were significantly higher than those under other conditions. Additionally, there were some germination inhibitory substances in dry seeds.

CONCLUSIONThe seed of T. edulis can be classified as having complex morphophysiological dormancy, and the morphological embryo dormancy played a leading role. Warm and cold stratification resulted in a fast dormancy breaking effect, and a high germination rate more than 90% could be obtained under the optimum conditions.

OBJECTIVECurrent study on the pollination biology of Tulipa edulis was conducted to investigate its pollination characteristics and to provide references for artificial domestication and breeding of T. edulis.

METHODFlowering dynamics, pollinators, morphology and structure of flower were observed. Different methods were adopted to evaluate the pollen vitality, and benzidine-H2O2 method was used for estimation of the stigma receptivity. Breeding system was evaluated based on out-crossing index (OCI) , pollen-ovule ratio (P/O) and the results of emasculation, bagging and artificial pollination studies.

RESULTThe flower of T. edulis showed typical characteristics of Liliaceae. The pollen remained viable to some extent during all the anthesis and peaked within three days after blossoming. Stigma acceptability peaked in the first day of blossom and dwindled away in the next four days. The type of breeding system of T. edulis was facultative xenogamy, three species of Halictus are the main pollination insects.

CONCLUSIONThe type of breeding system of T. edulis was facultative xenogamy, withal cross-pollination give priority to self-pollination, and the insects play a main role on the pollination of T. edulis, further validation are needed to judge if the wind is helpful to pollination.

The tulip tree (Liriodendron chinense) has been widely cultivated in Korea as a street or garden tree for its large flowers, which have a superficial resemblance to tulips. Occurrence of anthracnose disease on the leaves of tulip trees growing on the campus of Gyeongsang National University, Jinju, Korea, has been observed. Based on mycological characteristics, pathogenicity, and internal transcribed spacer sequence, the causal fungus was identified as Colletotrichum gloeosporioides. This is the first report on anthracnose disease caused by C. gloeosporioides on tulip trees in Korea.
Colletotrichum ; Flowers ; Fungi ; Korea ; Liriodendron ; Trees ; Tulipa

Two new records of Penicillium from blue moldy bulbs of lily are reported in Korea. The Korean isolates of P. albocoremium (Frisvad) Frisvad and P. tulipae Overy and Frisvad were phylogenetically identical to the reference species based on DNA sequence of the beta-tubulin gene. P. albocoremium and P. tulipae are described and illustrated.
Base Sequence ; Korea* ; Lilium* ; Penicillium* ; Tubulin ; Tulipa

OBJECTIVETo study optimum planting density and sowing depth of Tulipa edulis.

METHODThe effects of different planting densities, sowing depth and thin plastic film cover were studied on yield, rate of increase, bulb weight increased multiples, and proliferation rate of bulb.

RESULT AND CONCLUSIONUnder 30-200 bulbs per squremeter density range, the yield increased with the density increasing, and reached significance level. In 5-20 centimeter depth range, the yield and the number of harvested bulbs enhanced along with the sowing depth increasing, and the best sowing depth was 20 cm. Thin plastic film cover showed no effect on the growth.

Effects of different drying methods including sun drying, steamed, boiled, constant temperature drying (at 40, 50, 60 °C) on appearance, hardness, rehydration ratio, dry rate, moisture, total ash, extractive and polysaccharides contents were studied to provide the basis of standard processing method for Tulipa edulis bulbus. The results showed that the treatments of sun drying and 40 °C drying showed higher rehydration ratios, but lower dry rate, higher hardness, worse color, longer time and obvious distortion and shrinkage in comparison with other drying methods. The treatments of 60 °C constant temperature drying resulted in shorter drying time, lower water and higher polysaccharides content. Drying time is shorter and appearance quality is better in the treatment of steaming and boiling compared with other treatments, but the content of extractive and polysaccharides decreased significantly. The treatments of 50 °C constant temperature drying led to similar appearance quality of bulb to commercial bulb, and it resulted in lowest hardness and highest dry rate as well as higher rehydration ratio, extractive and polysaccharides content, moderate moisture and total ash contents among these treatments. Based on the results obtained, 50 °C constant temperature drying is the better way for the processing of T. edulis bulbus.
Color ; Desiccation ; methods ; Plant Stems ; chemistry ; Polysaccharides ; analysis ; Quality Control ; Tulipa ; chemistry ; Water ; analysis

OBJECTIVEPresent study was conducted to explore the growth and photosynthetic characteristics of Tulipa edulis under different light conditions (23%, 45%, 63%, 78%, 100% of full sunlight) and to determine the optimum light intensity for growth of T. edulis.

METHODThe leaf area and biomass indicators as well as reproductive characteristics were measured. The photosynthetic basic parameters and light response curve were determined by a LI-6400XT portable photosynthesis system, and the light response curve characteristic parameters was determined. Additionally, chlorophyll fluorescence parameters were determined by assorted fluorescence leaf chamber of LI-6400XT.

RESULTThe lowest biomass yield was observed in the 23% and 100% of full sunlight treatments while the highest value was found under the 78% of full sunlight conditions. With the reduction of light availability, the success rate of sexual reproduction, light saturation point (LSP) and light compensation point (LCP) reduced, while apparent quantum yield (AQY) increased. 23% and 45% of full sunlight treatments led to lower photosynthesis rate (Pn) and higher apparent quantum yield (AQY) in comparison with other treatents. The highest photosynthesis rate was observed in the 78% and 100% of full sunlight treatments. In addition, 78% of full sunlight treatments led to highest Fv/Fm, Fv'/Fm', PhiPS II, ETR, and qP.

CONCLUSIONT. edulis was able to adapt in a wide range of light intensity, and 78% of full sunlinght was the most suitable light condition for growth of T. edulis.

The effect of low temperature storage on dormancy breaking, sprouting and growth after planting of Tulipa edulis was studied. The results showed that starch content and activity of amylases significantly decreased during 10 weeks of cold storage, soluble protein content raised at first then decreased, and the peak appeared at the 6th week. However, total soluble sugar content which in- creased slowly at first than rose sharply and reducing sugar content increased during the storage duration. The bulbs with cold storage treatment rooted in the 6th week, which was about 2 weeks earlier than room temperature storage, but there were less new roots in the late period of storage. After stored at a low temperature, bud lengths were longer than that with room temperature treatment. Cold storage treatment could promote earlier emergence, shorten germination time, prolong growth period and improve the yield of bulb, but rarely affect the emergence rate. It was not beneficial to flowering and fruiting. The results indicated that 6-8 weeks of cold storage was deemed to be the key period of dormancy breaking preliminary.
Cold Temperature ; Plant Dormancy ; Plant Roots ; chemistry ; growth & development ; physiology ; Tulipa ; chemistry ; growth & development ; physiology

The study was conducted to explore the response of growth and yield of Tulipa edulis to flower bud removal and artificial pollination. And flower bud removal and artificial pollination were carried out in the squaring period and bloom stage respectively. The morphological index and biomass indicators were determined and the yield was counted in harvest time. Result showed that flower bud removal was beneficial to the growth of T. edulis, resulting in increasing growth index, biomass as well as the yield of bulb. The diameter and dry weight of T. edulis fruit by artificial pollination were increased significantly compared with the control. Seed setting percentage increased to 100%, and the number of seed as well as the single grain weight increased by 69.03% and 16.48%, respectively, which did not significantly affect the bulb production. In conclusion, Flower bud removal treatment accelerates bulb biomass increase, so as to improve its yield. Artificial pollination raised significantly seed setting percentage, seed number as well as the single grain weight.
Biomass ; Botany ; methods ; Flowers ; growth & development ; physiology ; Pollen ; growth & development ; physiology ; Pollination ; Tulipa ; growth & development ; physiology

PURPOSE: Inferior vena cava (IVC) filter is commonly practiced to prevent pulmonary embolism during endovascular therapy of deep vein thrombosis (EndoDVT). When the thrombus is trapped inside the filter during intervention, its removal is quite challenging. The purpose of this study is to determine retrieval rates of IVC filter after EndoDVT and its characteristics. METHODS: Patients who underwent EndoDVT in Inha Unversity Hospital from June 2004 to May 2009 were reviewed retrospectively. Retrievable IVC filter was inserted before EndoDVT. EndoDVT was done by catheter directed thrombolysis or pharmacomechanical thrombectomy using urokinase. IVC filter retrieval was decided according to computed tomography after 2 weeks. RESULTS: 126 patients were treated with EndoDVT. Optease (n=101) and Tulip (n=25) IVC filters were inserted. IVC filters were retrieved in 42.9% (54/126). There was no IVC filter related complication during its insertion and removal. IVC filter was not retrieved in 72 patients. Reasons for its failure include residual thrombosis in IVC filter (n=28), high risk for recurrent DVT (n=34), massive pulmonary embolism (n=8), and death (n=2). Residual thrombus inside IVC filter disappeared in 5 patients during 6-month follow up. CONCLUSION: IVC filters retrieval rate after EndoDVT was 42.9%. This can be improved by thorough patient follow up and extended retrievability.
Catheters ; Follow-Up Studies ; Humans ; Pulmonary Embolism ; Retrospective Studies ; Thrombectomy ; Thrombosis ; Tulipa ; Urokinase-Type Plasminogen Activator ; Vena Cava Filters ; Vena Cava, Inferior ; Venous Thrombosis