Background: In total hip arthroplasty (THA), the ideal stem length remains uncertain; different stem lengths are used in different cases or institutions. We aimed to compare the stress distributions of cementless tapered wedges and short stems in femurs with different femoral marrow geometries and determine the appropriate fit. Methods: Finite element models were created and analyzed using HyperMesh and LS-DYNA R11.1, respectively. The 3-dimensional shape data of the femurs were extracted from computed tomography images using the RETOMO software. Femurs were divided into 3 groups based on the Dorr classification. The computer-aided design data of cementless tapered wedge-type and short stems were used to select the appropriate size. In the finite element analysis, the loading condition of the femur was assumed to be walking. Volumes of interest (VOIs) were placed within the femur model at the internal and external contact points of the stem based on Gruen zones. The average stresses and strain energy density (SED) of the elements included in each VOI were obtained from the preoperative and postoperative models. Results: The von Mises stress and SED distributions of the cementless tapered wedge and short stems were similar in their respective Dorr classifications. In both stems, the von Mises stress and SED after THA were lower than before THA. The von Mises stress and SED of the cementless tapered wedge stem were higher than those of short stems. Cementless tapered wedge-type stems tended to have lower rates of change than short stems; however, Dorr C exhibited the opposite trend. In the Dorr classification comparison, the von Mises stress and SED were greater for both stems in the order of Dorr C > Dorr B > Dorr A, from Zone 2 to Zone 6. Conclusions In Dorr A and B, the short stem exhibited a natural stress distribution closer to the preoperative femur than the tapered wedge stem; however, in Dorr C, the short stem may have a greater effect on stress distribution, suggesting that it may cause greater effects, such as fracture in the early postoperative period, than other Dorr types.

Background: This study aimed to clarify the characteristics of stress distribution caused by the placement of tapered wedge stems in bowed femurs compared with that in normal femurs and the effect of varus stem placement. Methods: Models with normal and enhanced bowing were created from the right-side computed tomography data of a 17-yearold woman with the least bowing among 40 participants who underwent anterior cruciate ligament reconstruction or operative treatment for trauma in our hospital between January 2017 and May 2018. Finite element analysis was performed, assuming the tapered wedge stem was placed in the neutral and varus positions. Results: Varus stem placement on a femur with normal bowing showed a deviation and increase of von Mises stresses in the medial femur. Stem placement on a bowed femur, even when placed in the neutral position, increased stress across the periprosthetic bone. When the stem was placed in the varus position, von Mises stress across the periprosthetic bone increased. Zone 7, with strong bowing, demonstrated 3.6-fold increased stress compared with normal femurs. The maximum tensile principal stress was greatest in zone 6 and increased in zones 3 and 4. Conclusions Surgeons should assess femoral bowing preoperatively and pay particular attention to intraoperative stem alignment for femurs with high bowing.

Background: In total hip arthroplasty (THA), the ideal stem length remains uncertain; different stem lengths are used in different cases or institutions. We aimed to compare the stress distributions of cementless tapered wedges and short stems in femurs with different femoral marrow geometries and determine the appropriate fit. Methods: Finite element models were created and analyzed using HyperMesh and LS-DYNA R11.1, respectively. The 3-dimensional shape data of the femurs were extracted from computed tomography images using the RETOMO software. Femurs were divided into 3 groups based on the Dorr classification. The computer-aided design data of cementless tapered wedge-type and short stems were used to select the appropriate size. In the finite element analysis, the loading condition of the femur was assumed to be walking. Volumes of interest (VOIs) were placed within the femur model at the internal and external contact points of the stem based on Gruen zones. The average stresses and strain energy density (SED) of the elements included in each VOI were obtained from the preoperative and postoperative models. Results: The von Mises stress and SED distributions of the cementless tapered wedge and short stems were similar in their respective Dorr classifications. In both stems, the von Mises stress and SED after THA were lower than before THA. The von Mises stress and SED of the cementless tapered wedge stem were higher than those of short stems. Cementless tapered wedge-type stems tended to have lower rates of change than short stems; however, Dorr C exhibited the opposite trend. In the Dorr classification comparison, the von Mises stress and SED were greater for both stems in the order of Dorr C > Dorr B > Dorr A, from Zone 2 to Zone 6. Conclusions In Dorr A and B, the short stem exhibited a natural stress distribution closer to the preoperative femur than the tapered wedge stem; however, in Dorr C, the short stem may have a greater effect on stress distribution, suggesting that it may cause greater effects, such as fracture in the early postoperative period, than other Dorr types.

Background: In total hip arthroplasty (THA), the ideal stem length remains uncertain; different stem lengths are used in different cases or institutions. We aimed to compare the stress distributions of cementless tapered wedges and short stems in femurs with different femoral marrow geometries and determine the appropriate fit. Methods: Finite element models were created and analyzed using HyperMesh and LS-DYNA R11.1, respectively. The 3-dimensional shape data of the femurs were extracted from computed tomography images using the RETOMO software. Femurs were divided into 3 groups based on the Dorr classification. The computer-aided design data of cementless tapered wedge-type and short stems were used to select the appropriate size. In the finite element analysis, the loading condition of the femur was assumed to be walking. Volumes of interest (VOIs) were placed within the femur model at the internal and external contact points of the stem based on Gruen zones. The average stresses and strain energy density (SED) of the elements included in each VOI were obtained from the preoperative and postoperative models. Results: The von Mises stress and SED distributions of the cementless tapered wedge and short stems were similar in their respective Dorr classifications. In both stems, the von Mises stress and SED after THA were lower than before THA. The von Mises stress and SED of the cementless tapered wedge stem were higher than those of short stems. Cementless tapered wedge-type stems tended to have lower rates of change than short stems; however, Dorr C exhibited the opposite trend. In the Dorr classification comparison, the von Mises stress and SED were greater for both stems in the order of Dorr C > Dorr B > Dorr A, from Zone 2 to Zone 6. Conclusions In Dorr A and B, the short stem exhibited a natural stress distribution closer to the preoperative femur than the tapered wedge stem; however, in Dorr C, the short stem may have a greater effect on stress distribution, suggesting that it may cause greater effects, such as fracture in the early postoperative period, than other Dorr types.

Background: In total hip arthroplasty (THA), the ideal stem length remains uncertain; different stem lengths are used in different cases or institutions. We aimed to compare the stress distributions of cementless tapered wedges and short stems in femurs with different femoral marrow geometries and determine the appropriate fit. Methods: Finite element models were created and analyzed using HyperMesh and LS-DYNA R11.1, respectively. The 3-dimensional shape data of the femurs were extracted from computed tomography images using the RETOMO software. Femurs were divided into 3 groups based on the Dorr classification. The computer-aided design data of cementless tapered wedge-type and short stems were used to select the appropriate size. In the finite element analysis, the loading condition of the femur was assumed to be walking. Volumes of interest (VOIs) were placed within the femur model at the internal and external contact points of the stem based on Gruen zones. The average stresses and strain energy density (SED) of the elements included in each VOI were obtained from the preoperative and postoperative models. Results: The von Mises stress and SED distributions of the cementless tapered wedge and short stems were similar in their respective Dorr classifications. In both stems, the von Mises stress and SED after THA were lower than before THA. The von Mises stress and SED of the cementless tapered wedge stem were higher than those of short stems. Cementless tapered wedge-type stems tended to have lower rates of change than short stems; however, Dorr C exhibited the opposite trend. In the Dorr classification comparison, the von Mises stress and SED were greater for both stems in the order of Dorr C > Dorr B > Dorr A, from Zone 2 to Zone 6. Conclusions In Dorr A and B, the short stem exhibited a natural stress distribution closer to the preoperative femur than the tapered wedge stem; however, in Dorr C, the short stem may have a greater effect on stress distribution, suggesting that it may cause greater effects, such as fracture in the early postoperative period, than other Dorr types.