UNLABELLEDTo evaluate the effects of preadjusted bracket base shape, the morphology of tooth surface where bracket locates, and the suitability relevant to location of bracket on the preadjusted edgewise appliance technique. 1 vertical curve and 3 horizontal curves of the clinical crown surface of anterior teeth and bicuspid teeth were measured with the precise contour instrument on the 60 plaster models of the subjects who have normal occlusion in Sichuan province. It was found that variation of identical curve exists at the different heights between the teeth and between the individuals; the surface of the central zone of tooth-crown gradually protrudes from incisors to bicuspid teeth in the vertical direction, and the mesial contour of cuspid is more prominent than the distal in the horizontal direction.

CONCLUSIONThe 4 mm X 3 mm contour of the vestibular central zone of identical tooth-crown in different individuals is fairly stable; it is suitable for the location of preadjusted brackets. The vertical shifts of brackets could change the preadjusted torque value and the design of cuspid bracket should have the distinction between mesial and distal shape.

Bicuspid ; anatomy & histology ; Dental Occlusion ; Humans ; Incisor ; anatomy & histology ; Tooth Crown ; anatomy & histology ; Torque

OBJECTIVETo observe the results of surgical crown lengthening procedure and the factors which affected the success of the surgery.

METHODSCrown lengthening surgery was performed on 27 teeth. The distance between margin of tooth and bone crest (MT-B) was obtained greater than 4 mm during the surgeries on 10 teeth which were considered as satisfying group. The other 17 teeth were as temporized group with MT-B < or = 3 mm. The position of the tooth margin was evaluated before surgery, immediately after suturing, and at 4 - 6 weeks after surgery. The occlusal force and tooth mobility were measured immediately after restoration, at 3 and 6 months after surgery.

RESULTSMT-B was obtained > or = 4 mm and all margins and sites of the teeth were exposed in satisfying group (10/10). At least 1 site with MT-B < 3 mm in temporized group in which there still were 11 sites (16%) in 5 teeth (29%) with subgingival tooth margin at 4 - 6 weeks after surgery. There were more teeth showing increased mobility in temporized group (12/17) than in satisfying group (1/10) after surgery (P < 0.05). The occlusal force of the teeth after surgery and restoration in temporized group was significantly lower than that of their counterpart teeth (P < 0.01), but it was not the case in satisfying group (P > 0.05).

CONCLUSIONSIt is suggested that ideal exposure of tooth margin could be obtained if 4 mm from tooth margin to alveolar crest could be created during the crown lengthening surgery. The teeth both with 4 - 5 mm subgingival margin sites and factors limiting surgical performance are not the suitable indications for the surgical crown lengthening.

Alveolectomy ; Crown Lengthening ; methods ; Follow-Up Studies ; Gingiva ; anatomy & histology ; Humans ; Periodontium ; anatomy & histology ; physiology ; Prospective Studies ; Tooth Crown ; pathology

OBJECTIVETo investigate the correlation among the morphology of crown, alveolar ridge crest and gingiva in maxillary anterior region of adults and to provide anatomical basis for clinical implant esthetics.

METHODSSixty Han-Chinese with healthy peridontium were selected in this study. The curvature of labial alveolar crest, the length and height of inter-proximal bone were measured on 3-D model reconstructed from cone-beam CT (CBCT) images, and the curvature of free gingiva, the width and height of inter-dental papilla and central incisor crown were evaluated on casts. The ratio of crown width to height was ranked and the 10 ranked highest were categorized as group Short-Wide (SW), the 10 ranked lowest were selected as group Long-Narrow (LN).

RESULTSIn maxillary anterior region, the curvature angle of both alveolar crest and marginal gingiva were significantly different among different tooth regions, but the alveolar and gingival curvature was significantly correlated in the same region (P < 0.05). The morphology of inter-proximal bone and papilla was significantly correlated (P < 0.01), except the region between central and lateral incisors (P = 0.625, P > 0.05). Compared to group SW, group LN formed a pronounced scalloped contour of gingival margin (P = 0.002) and slender inter-dental papilla (P = 0.000).

CONCLUSIONSThe free gingival curvature and inter-dental papillary morphology are significantly correlated with the morphology of crown and alveolar ridge crest in maxillary anterior region of Han-Chinese. Individuals with long-narrow crown, pronounced scalloped marginal gingiva and slender inter-dental papilla are susceptible to risk implant esthetics.

Alveolar Process ; diagnostic imaging ; Crowns ; Gingiva ; anatomy & histology ; Humans ; Incisor ; anatomy & histology ; Maxilla ; Radiography ; Tooth Crown ; anatomy & histology

OBJECTIVE: To analyze the esthetic proportions of maxillary anterior teeth in term of the apparent widths proportion of the adjacent teeth and width/height ratio of the clinical crown in 120 Chinese adults. METHODS: Maxillary gypsum casts were obtained from the dental laboratories of stomatological hospitals in North China, Southeast China, and Southwest China, according to the inclusion criteria and exclusion criteria. Standardized digital photographs of each cast were recorded. The apparent widths and actual widths and heights of the central incisors, lateral incisors and canines were determined by ImageJ software for the calculation of apparent widths proportion of the adjacent teeth and width/height ratio of the clinical crown. The ideal apparent widths proportion (Golden proportion and Preston proportion) and width/height ratio (0.80) were tested. The gender, arch side, and regional differences were investigated. RESULTS: The apparent widths proportion of the lateral/central incisor was 0.724±0.047, of the canine/lateral incisor was 0.814±0.092. The width/height ratio of the central incisor was 0.848±0.072, of the lateral incisor was 0.834±0.094, of the canine was 0.883±0.098. The esthetic proportions were different from the predicted ideal ratio (P < 0.001). The apparent widths proportion of lateral/central incisor was significantly larger in the right side than that in the left side (0.730± 0.044 vs. 0.718±0.050), and was significantly smaller in North China than that in Southwest China (0.711±0.051 vs. 0.731±0.044). The width/height ratio of the central incisor was significantly larger in the female than that in the male (0.855±0.074 vs. 0.835±0.068), and in the right side than that in the left side (0.855±0.073 vs. 0.842±0.072). The width/height ratio of the lateral incisor was significantly larger in the female than that in the male (0.843±0.097 vs. 0.817±0.084). CONCLUSION The apparent widths proportion of adjacent teeth and the width/height ratio of the clinical crown in Chinese adults are different from the foreigner's. The esthetic proportion parameters have significant population specificity, and the measurements cannot be generalized as well as it should be applied with caution.
Adult ; Asians ; China ; Cuspid ; Esthetics ; Esthetics, Dental ; Female ; Humans ; Male ; Maxilla/anatomy & histology* ; Odontometry ; Tooth Crown/anatomy & histology*

OBJECTIVEThe purpose of this study was to investigate the center height of clinical crowns and the difference among individuals, together with the regularity of the Spee curve in mandible and compensating curve in maxilla for the people with normal occlusion in Chengdu area.

METHODSThe data were derived from systematically collected people with normal occlusion in Chengdu area, including 36 males and 39 females (ranged from 18 to 35 years). The values of center height of clinical crowns, the depths of Spee curve and curve formed by the center of clinical crowns in mandible were obtained by measurement. Afterwards, the distribution of the center height of clinical crowns was analyzed, as well as the depth of curve formed by the center of clinical crowns in mandible and its correlation with depth of Spee.

RESULTS(1) The distribution of the center height of clinical crowns accord with normal distribution and the standard deviation was minor(< 0.5 mm); (2) There was no statistical difference between male and female for the center height of clinical crowns; (3) The depth of curve formed by the center of clinical crowns in mandible and the depths of Spee curve showed highly correlation (gamma = 0.986, P < 0.0001).

CONCLUSION(1) The difference of the center height in clinical crowns among individuals with normal occlusion in Chengdu area was minor; (2) There was no significant difference on the center height in clinical crowns between male and female; (3) Provide a recommended bracket placement chart suitable for people of Chengdu area in clinical practice; (4) The brackets of the pre-adjusted appliance should be placed in the center of clinical crowns, despite some adjustment are needed in some special circumstances.

Adolescent ; Adult ; Anthropometry ; Dental Arch ; anatomy & histology ; Dental Occlusion ; Female ; Humans ; Male ; Mandible ; anatomy & histology ; Maxilla ; anatomy & histology ; Orthodontic Brackets ; Reference Values ; Tooth Crown ; anatomy & histology

The database with standard 3D tooth crowns has laid the groundwork for dental CAD/CAM system. In this paper, we design the standard tooth crowns in 3DS MAX 9.0 and create a database with these models successfully. Firstly, some key lines are collected from standard tooth pictures. Then we use 3DS MAX 9.0 to design the digital tooth model based on these lines. During the design process, it is important to refer to the standard plaster tooth model. After some tests, the standard tooth models designed with this method are accurate and adaptable; furthermore, it is very easy to perform some operations on the models such as deforming and translating. This method provides a new idea to build the database with standard 3D tooth crowns and a basis for dental CAD/CAM system.
Computer-Aided Design ; Databases, Factual ; Dental Models ; Dental Prosthesis Design ; methods ; trends ; Imaging, Three-Dimensional ; Tooth Crown ; anatomy & histology

OBJECTIVETo evaluate Beijing college students' concern and preference for maxillary anterior tooth esthetic factors.

METHODSSeveral images about lip and tooth were made through computer. A questionnaire was sent out to students in ten colleges and then collected. There were five factors to be evaluated: relationship of maxillary incisors and lower lip, numbers of tooth exposed, shape of centric incisor, crown width-length ratio, gingival margin. Concern of the beauty of anterior tooth, ie. tooth shape, tooth arrangement, shape of gingiva and so on, were then analyzed.

RESULTSThere were 408 responses collected, and 47.5% (194/408) of them preferred light contact between upper incisors and lower lip; 49.5% (202/408) preferred 8 tooth exposed when smile; 69.1% (282/408) preferred oval crown shape; 52.5% (214/408) preferred 0.85 as a crown width-length ratio; 49.5% (202/408)of responses chose the curve of gingiva runs horizontal. The average score of concern for male was 52.6% (100/190), for female was 59.6% (130/218).

CONCLUSIONSMost results from this study accord with the classical principles of tooth esthetics. Sex affects the concern and preferences of maxillary anterior tooth esthetics factors.

Adult ; China ; Esthetics, Dental ; Female ; Gingiva ; anatomy & histology ; Humans ; Incisor ; anatomy & histology ; Lip ; anatomy & histology ; Male ; Maxilla ; anatomy & histology ; Odontometry ; methods ; Patient Preference ; Sex Factors ; Smiling ; Surveys and Questionnaires ; Tooth Crown ; anatomy & histology ; Young Adult

OBJECTIVETo investigate the importance of root information in diagnosis set-up by constructing three-dimensional (3D) digital models with individual anatomic roots.

METHODSPretreatment cone-beam CT (CBCT) and laser scanning data were collected from two patients (extraction and non-extraction each) with skeletal Class I malocclusion. Threshold segmentation of the CBCT was performed to generate a 3D digital model which has individually isolated tooth. This model and the scan model were superimposed to generate an integrated model (Mo) composed of high-resolution surface scan crowns sutured to the CBCT roots. Pretreatment dentition plaster model were made into set-up model. The diagnosis model set-up was performed successively by three orthodontists and one senior orthodontic technician. Set-up model scan of each patient after tooth alignment was obtained. The isolated composite teeth were individually superimposed onto the set-up model surface scan to creat set-up model (Ma, Mb, Mc, Md) containing root position. These isolated composite teeth were also superimposed onto the posttreatment surface scan depicting the posttreatment model (M). In order to observe whether diagnosis model set-up would cause exposure of the root, Ma-Md were compared with Mo, which showed the true positions of alveolus. In order to validate the accuracy of the expected root position setup, Ma-Md were compared with the true root position represented by M. Color displacement maps generated to measure the discrepancies of root positions.

RESULTSNonparallel and exposure of the root was found in all setup models. Color displacement maps through molar superimpositions showed maximum differences of 8.79 mm for the maxillary teeth and 9.96 mm for the mandibular teeth.

CONCLUSIONSDiagnosis model set-up based only on crown can not absolutely ensure the good alignment of roots without root exposure. It is necessary to construct the integrated model including root for diagnosis during tooth arrangement process.

Cone-Beam Computed Tomography ; Dental Casting Technique ; Humans ; Image Processing, Computer-Assisted ; Lasers ; Malocclusion, Angle Class I ; diagnosis ; Molar ; Pilot Projects ; Tooth ; Tooth Crown ; anatomy & histology ; diagnostic imaging ; Tooth Root ; anatomy & histology ; diagnostic imaging

Objective: To explore and analyze the correlation between labial gingival morphology and alveolar bone morphology of maxillary anterior teeth in patients with posterior dental implant, so as to provide reference basis for restoration design and esthetic reconstruction of anterior teeth. Methods: Sixty-four patients [24 males, 40 females (25.6±3.3) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to May 2021. According to the visibility of periodontal probe through gingival margin, the subjects were divided into thin and thick gingival biotypes, including 29 cases of thin biotype and 35 cases of thick biotype. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. Geomagic and Mimics software were used to measure and record the labial crown width and length, gingival papilla height, gingival angle, bone papilla height and bone margin angle of maxillary anterior teeth. Results: The crown width length ratios of maxillary central incisors, lateral incisors and canines were 0.85±0.08, 0.80±0.08 and 0.86±0.09 (F=10.71, P<0.01). The height of gingival papilla between maxillary central incisors, between central incisors and lateral incisors, between lateral incisors and canines were (3.93±0.86), (3.47±0.84) and (3.38±0.91) mm respectively (F=7.44, P<0.01), and the height of corresponding bone papilla were (3.44±0.88), (3.12±0.75) and (2.72±0.63) mm respectively (F=14.26, P<0.01). The gingival margin angles of maxillary central incisors, lateral incisors and canines were 88.3°±7.7°, 84.7°±8.9° and 81.2°±6.6° (F=13.15, P<0.01), and the bone margin angles were 103.2°±13.1°, 99.5°±11.2° and 110.6°±13.0° (F=13.25, P<0.01). The crown width length ratio (0.81±0.08), gingival margin angle (82.2°±7.4°) and bone margin angle (99.4°±12.9°) of thin gingival subjects were significantly lower than those of thick gingival subjects (0.85±0.09, 86.5°±8.6°, 108.5°±11.4°) (t=-2.79, 3.63, 5.20, P<0.01). The height of gingival papilla [(3.93±0.81) mm] and bone papilla [(3.43±0.80) mm] in thin gingival subjects were significantly lower than those in thick gingival subjects [(3.34±0.84) and (2.85±0.71) mm, respectively] (t=-4.89, -5.36, P<0.01). The height of labial gingival papilla of upper anterior teeth was positively correlated with that of bone papilla in all patients (r=0.66, P<0.01); the ratio of crown width to length of upper anterior teeth was positively correlated with the angle of bone margin (r=0.42, P<0.01); the height of anterior gingival papilla was negatively correlated with the angle of bone margin (r=-0.58, P<0.01), and the height of bone papilla was negatively correlated with the angle of bone margin (r=-0.82, P<0.01). Conclusions: The crown shape, gingival shape and alveolar bone shape of maxillary anterior teeth were different in different tooth positions. Patients with different periodontal phenotypes had different crown width length ratio, gingival papilla height, bone papilla height, gingival margin angle, and bone margin angle.
Adult ; Cone-Beam Computed Tomography ; Dental Implants ; Esthetics, Dental ; Female ; Gingiva/anatomy & histology* ; Humans ; Male ; Maxilla/diagnostic imaging* ; Tooth Crown ; Young Adult