The purpose of this study was to investigate the characteristiss of korean multi-rooted teeth extracted by periodontal disease. A total of 182 extracted multi-rooted teeth were examined. The distance from the cementoenamel junction(CEJ) to the root groove and from the CEJ to the root division was measured. The frequency of the root grooves were calculated. The results are as follows : 1. Distances from CEJ to the root groove were 1.53, 1.60mm for maxillary first premolars mesial, distal sides, 1.26, 1.38, 1.75mm for maxillary first molars buccal, mesial, distal sides, 1.38, 1.71, 1.41mm for maxillary second molars buccal, mesial, distal sides, 0.98, 0.99mm for mandibular first molars buccal , lingual sides and 1.28, 1.35mm for mandibular second molars buccal, lingual sides. 2. The frequency of the root grooves were 17.4, 30.4% for maxillary first premolars mesial, distal sides, 44.4, 84.1, 67.5% for maxillary first molars buccal, mesial, distal sides, 100, 90.3, 90.3% for maxillary second molars buccal, mesial, distal sides, 42.9, 77.8% for mandibular first molars buccal, lingual sides and 90.6% for mandibular second molars buccal, lingual sides. 3. Distances from CEJ to the root division were 6.8, 7.2mm for maxillary first premolars mesial, distal sides, 3.3, 4.38, 4.34mm for maxillary first molars buccal, mesial, distal sides, 3.67, 4.8, 4.07mm for maxillary second molars buccal, mesial, distal sides, 3.1, 3.89mm for mandibular first molars buccal, lingual sides and 3.2, 4.06mm for mandibular second molars buccal, lingual sides.
Bicuspid ; Molar ; Periodontal Diseases* ; Tooth Cervix ; Tooth*

tooth CEJ distance, gingival crest-adjacent tooth CEJ distance, existence of periapical lesion, vertical defect around the extraction socket, horizontal defect around the extraction socket, probing depth, radiologic change of alveolar crest height. We report a positive outcome about immediate implantation with review of literatures.]]>
Dental Implants ; Heterografts ; Humans ; Tooth ; Tooth Cervix

OBJECTIVE: The purpose of this study was to investigate the relationship between the enamel thickness of proximal surfaces and the morphologic features of mandibular incisors. METHODS: Mesiodistal/faciolingual (MD/FL) index, MD width, and height of contour width/cervical width ratio were measured in 40 incisors extracted from Koreans. For determining the height of contour width/cervical width ratio, the cervical width was measured as the distance between proximal cementoenamel junctions. Then, the labial surface was ground to the height of the contour level to measure enamel thickness. Pearson correlation analysis was used to investigate the correlation between enamel thickness and morphologic features. RESULTS: Enamel thickness was 0.75 +/- 0.07 mm per side, and MD width was 5.56 +/- 0.40 mm. Enamel thickness and MD width were significantly correlated. However, a significant relationship was not observed between enamel thickness and MD/FL index or the height of contour width/cervical width ratio. CONCLUSIONS: The results suggest that enamel thickness is affected only by MD width. Therefore, if the MD width is the same for mandibular incisors with a large MD/FL index or triangular shape and mandibular incisors with normal shape, then the limit of enamel reduction for reproximation will be the same.
Dental Enamel ; Incisor ; Tooth Cervix

A non-carious cervical lesion(NCCL) is the loss of tooth structure at the cementoenamel junction level that is unrelated to dental caries. This study was to evaluate the occlusal and periodontal status of teeth with non-carious cervical lesions. We evaluated 105 teeth with non-carious cervical lesions in 35 subjects aged 38-75 years and characterized them based on the shape and dimension, plaque retention, bleeding on probing(BOP), probing pocket depth(PPD), occlusal status, brushing type, hypersensitivity and wear facet. The results of this study were as follows 1. No significant association was observed between cervical lesions and occlusal contact in lateral excursions. 2. No significant difference occurred in plaque retention, PPD, BOP between teeth with and without cervical lesions. 3. Test teeth had a significantly higher percentage of hypersensitivity and occlusal wear facet than teeth without cervical lesions. 4. Wedge shaped lesions had a significantly higher percentage of plaque than saucer shaped lesions. 5. Teeth with plaque were found to have significantly deeper PPD than teeth without plaque retention in cervical regions. 6. Teeth with occlusal contacts were found to have significantly deeper PPD than teeth without occlusal contacts. 7. No significant association was observed between cervical lesions and PPD independent of plaque retention and occlusal contacts Although more knowledge is necessary, our results suggest that occlusal contact and bacterial plaque may influence on periodontal tissue, but NCCL is not directly associated with periodontal health
Dental Caries ; Hemorrhage ; Hypersensitivity ; Tooth Attrition ; Tooth Cervix ; Tooth*

PURPOSE: The aim of this study was to evaluate the volumetric change of teeth after preparation for various designs and margin locations through Micro CT analysis (Skyscan 1076: SKYSCAN, Konitch, Belgium). MATERIALS AND METHODS: The 36 artificial teeth were used to determine reduction volume of upper central incisor. According to the restorative design these 36 teeth were divided into 4 groups and according to the marginal location each group was divided into 3 subgroups. The volume of unprepared teeth was obtained by using Micro CT and the volume of prepared teeth was obtained in the same method. The CT scanned images before and after preparation were superimposed. RESULTS: The volume difference was significantly increased as follows: traditional laminate veneer < full laminate veneer < all ceramic crown < metal ceramic crown. One-way ANOVA and Tukey multiple comparison analyses were used to analyze the data in this study. In each group the volume difference was significantly increased as follows: 1 mm above CEJ < CEJ < 1 mm below CEJ (P<.05). The % volume difference of all ceramic crown and metal ceramic crown was 31 - 48% and that of laminate veneer was 14 - 30%. The volume difference of the traditional laminate veneer was 1/3 of that of metal ceramic crown. The full laminate (1 mm below CEJ) and all ceramic crown (1 mm above CEJ) showed a similar volume difference. Metal ceramic crown showed 13.7 % more volume difference than all ceramic crown. CONCLUSION: There exists the difference in volumetric change according to designs of restoration and margin locations of preparation.
Ceramics ; Crowns ; Incisor ; Tooth ; Tooth Cervix ; Tooth, Artificial

The delivery of optimal orthodontic treatment is greatly influenced by a clinician's ability to predict and control tooth movement achieved by applying known force systems to the dentition. It is important to determine the location of the center of resistance of a tooth or group of teeth to better understand the nature of their displacement characteristics under the various force levels. The purpose of this study was to define the location of the centers of resistance of various units of the upper anterior segment for lingually directed 100gm and 200gm force in a dry human skull. The units investigated were composed of four incisors and six anterior teeth. In addition, the effect of change in force magnitude on the location of the center of resistance of these units was investigated. The laser reflection technique was used to measure the initial displacements of the consolidated teeth under loading. The results were as follows: 1. The instantaneous center of resistance for the four anterior teeth was located vertically between level 4 and level 5-that is, at 37.4 % apical to the cementoenamel junction level. 2. The instantaneous center of resistance for the six anterior teeth was located vertically just beneath level 5-that is, at 50.3 % apical to the cementoenamel junction level. 3. Increasing force levels had little effect on the location of the center of resistance of a given unit. 4. The location of the instantaneous center of resistance shifted apically as the number of dental units consolidated increased.
Dentition ; Humans ; Incisor ; Skull ; Tooth Cervix ; Tooth Movement ; Tooth*

The delivery of optimal orthodontic treatment is greatly influenced by clinician's ability to predict and control tooth movement by applying well-known force system to dentition. It is very important to determine the location of the centers of resistance of a tooth or teeth in order to have better understanding the nature of displacement characteristics under various force levels. In this study, three dimensional finite element analysis was used to measure the initial displacement of the consolidated teeth under loading. The purpose of this study was to define the location of the centers of resistance at the upper six anterior segment. To observe the changes of six anterior segment, 200gm, 250gm, 300gm, and 350gm forces at right and left hand side each were imposed toward lingual direction. For this study, two cases, six anterior teeth and six anterior teeth after corticotomy, were reviewed. In addition, it was reviewed the effects of changes on the location of the center of resistance in both cases based on different degree of forces aforementioned. The results were that : 1. The instantaneous center of resistance for the six anterior teeth was vertically located between level 4 and level 5, which is, at 6.76mm, 44.32 % apical to the cementoenamel junction level. 2. The instantaneous center of resistance for the six anterior teeth after corticotomy was located vertically between level 4 and level 5, that is, at 7.09mm, 46.38 % apical to the cementoenamel junction level. 3. Changes of force showed little effect on the location of the center of resistance in each case. 4. It was observed that the location of the instantaneous center of resistance for the six anterior teeth after corticotomy was changed more than the six anterior teeth without corticotomy to the apical part, and the displacement of the consolidated anterior teeth moved further in case of the consolidated teeth after corticotomy.
Dentition ; Finite Element Analysis* ; Hand ; Tooth Cervix ; Tooth Movement ; Tooth*

OBJECTIVE: In this study, we measured the cortical bone thickness in the mandibular buccal and lingual areas using computed tomography in order to evaluate the suitability of these areas for application of temporary anchorage devices (TADs) and to suggest a clinical guide for TADs. METHODS: The buccal and lingual cortical bone thickness was measured in 15 men and 15 women. Bone thickness was measured 4 mm apical to the interdental cementoenamel junction between the mandibular canine and the 2nd molar using the transaxial slices in computed tomography images. RESULTS: The cortical bone in the mandibular buccal and lingual areas was thicker in men than in women. In men, the mandibular lingual cortical bone was thicker than the buccal cortical bone, except between the 1st and 2nd molars on both sides. In women, the mandibular lingual cortical bone was thicker in all regions when compared to the buccal cortical bone. The mandibular buccal cortical bone thickness increased from the canine to the molars. The mandibular lingual cortical bone was thickest between the 1st and 2nd premolars, followed by the areas between the canine and 1st premolar, between the 2nd premolar and 1st molar, and between the 1st molar and 2nd molar. CONCLUSIONS: There is sufficient cortical bone for TAD applications in the mandibular buccal and lingual areas. This provides the basis and guidelines for the clinical use of TADs in the mandibular buccal and lingual areas.
Bicuspid ; Female ; Humans ; Male ; Molar ; Tooth Cervix

OBJECTIVES: Pericoronitis was the most common indication for mandibular third molar surgery and there are no universally acceptable predictive criteria for pericoronitis occurrence. This study was designed to analyze the correlation of the pericoronitis and the eruption state of the mandibular third molar using panoramic radiographs statistically. MATERIALS AND METHODS: 218 patients whose chief complaint was the extraction of the mandibular third molar were examined. The presence and absence of pericoronitis, age, sex, position of extraction site, angulation, impaction degree, position to the anterior border of mandibular ramus, distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of the mandibular third molar were assessed. Then the correlation of pericoronitis and the eruption state of the mandibular third molar were analyzed by Student's t-test and chi-square test. RESULTS: There was no correlation between Pericoronitis and age, sex, position of the mandibular third molar. The angulation(P=0.005), impaction degree(P=0.043), relation with anterior border of mandibular ramus(P=0.003), distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of the mandibular third molar(P<0.05) were correlated with pericoronitis. CONCLUSIONS: The occurrence of the pericoronitis can be predicted by the eruption state of the mandibular third molar such as angulation, impaction degree, relation with anterior border of mandibular ramus, distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of third molar.
Humans ; Molar ; Molar, Third* ; Pericoronitis* ; Tooth Cervix

OBJECTIVES: Pericoronitis was the most common indication for mandibular third molar surgery and there are no universally acceptable predictive criteria for pericoronitis occurrence. This study was designed to analyze the correlation of the pericoronitis and the eruption state of the mandibular third molar using panoramic radiographs statistically. MATERIALS AND METHODS: 218 patients whose chief complaint was the extraction of the mandibular third molar were examined. The presence and absence of pericoronitis, age, sex, position of extraction site, angulation, impaction degree, position to the anterior border of mandibular ramus, distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of the mandibular third molar were assessed. Then the correlation of pericoronitis and the eruption state of the mandibular third molar were analyzed by Student's t-test and chi-square test. RESULTS: There was no correlation between Pericoronitis and age, sex, position of the mandibular third molar. The angulation(P=0.005), impaction degree(P=0.043), relation with anterior border of mandibular ramus(P=0.003), distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of the mandibular third molar(P<0.05) were correlated with pericoronitis. CONCLUSIONS: The occurrence of the pericoronitis can be predicted by the eruption state of the mandibular third molar such as angulation, impaction degree, relation with anterior border of mandibular ramus, distance between distal cementoenamel junction of second molar and mesial cementoenamel junction of third molar.
Humans ; Molar ; Molar, Third* ; Pericoronitis* ; Tooth Cervix