Moyamoya disease is a chronic progressive cerebrovascular disease. It got its nickname, the moyamoya disease, because the image of abnormal blood vascular net at the skull base in the encephaloangiography of such patients is very similar to smog. The moyamoya disease can be divided into two types: ischemic and hemorrhagic according to its clinical manifestations and imaging characteristics. In the ischemic type of moyamoya disease, when the blood vascular lumens are not narrow enough to completely block the blood flow, the chief manifestation is the cerebral blood circulation insufficiency; when the salvage is not in time, the disease will further progress to develop vascular obstruction or thrombosis, resulting in cerebral infarction, finally hemiplegia, aphasia, etc. irreversible symptoms and signs occur. In the primary hospital, the first choice for treatment of acute cerebral infarction (ACI) is drug thrombolysis. However, the main treatment for moyamoya disease with ACI is chiefly revascularization. This article reported a patient with moyamoya disease and ACI successfully treated by intravenous reteplase for thrombolysis in People's Hospital of Pucheng County.

Objective To apply electrical impedance tnmography that is a new evaluation ap-proach to monitor the development of retroperitoneal injury. We used retroperitoneal inject blood model in pigs to study the feasibility on monitoring retroperitoneal bleeding and to provide premise in theory and practice for clinical application. Methods Five pigs were used on the experiment. We insert a vessel into the retroperitoneal and inject blood to simulate retroperitoneal bleeding. Sixteen electrodes were atta-ched on the abdominal region circumference of pigs and used for electrical current injection and surface voltage measurement. Then the monitoring images were performed by electrical impedance tomography. Results The images of electrical impedance tomography retroperitoneal inject blood model of five pigs were clear, the minimal impedance scale was decreasing significantly as the bleeding volume increasing and the images were changed significantly too. The computerized tomography and the dissecting results confirmed the blood was limited in retroperitoneal. Conclusions The establishments of pigs retroper-itoneal inject blood model was successful. The images of electrical impedance tomography retroperitoneal inject blood model were clear with significant contrast. It's feasible to use electrical impedance tomography system to monitor the retroperitoneal bleeding. This technique may become a useful tool for monitoring ret-roperitoneal injury in intensive care patients.

Objective To evaluate the clinical effect of mandibular osteomuscular flap pedicled with temporalis and radial forearm free flap to repair palatomaxillary defects. Methods From March 2008 to March 2011,nine patients with palatomaxillary defects following malignant tumor ablation,were repaired with mandibular osteomuscular flap pedicled with temporalis and radial forearm free flap. According to Brown's classification for the maxillectomy defect,eight cases were type Ⅱ B and 1 case was type Ⅱ C. There were 6 males and 3 females with an average age of 57 years(range,34-68 years). Results All the 9 osteomuscular flaps and forearm flaps survived.The patients were followed up for 12 to 24 months with an average of 14 months. The patients acquired satisfactory appearance and complete functional restoration except 1 case of chondrosarcoma of recurrence was encountered 6 months after operation. Conclusions Palatomaxillary defects were reconstructed by mandibular osteomuscular flap pedicled with temporalis and radial forearm free flap immediately.It is easy to elevate,safe,and there were no donor site problems.This is an ideal method of repairing the palato maxillary defects.

Objective To investigate the consensus and controversies on delineation of radiotherapy target volume for patients with non-small cell lung cancer(NSCLC). Methods Study questionnaires were designed by radiation oncologists in Peking University School of Oncology. The forms were sent through email to radiation oncologists in 10 radiation departments in China and 2 departments in US in November,2007. The brief introduction and PET/CT digital data of one patient with NSCLC were sent to radiation oncologists in 10 departments in Beijing. On Jan. 12,2008,the case discussion was held by more than 300 radiation oncologists from Beijing,Tianjin, Hebei, Liaoning Province and Inner Mongolia Autonomous Region. Results All receivers of the questionnaire responded . The set up error was 5-7 mm . For patients with locally advanced NSCLC treated with radiotherapy concurrently with near full dose chemotherapy,ll out ot 12 responding departments defined planning target volume(PTV) of primary tumor as gross tumor volume(GTV) plus 6-8 nun plus set-up error and respiratory movements ,and only one defined PTV as GTV plus set-up error and respiratory movements. For PTV of the mediastinal lymph nodes in the same patient,9 out of 12 responding departments defined PTV as GTV plus 6-8 mm plus set-up error and respiratory movements,and 3( of China) out of 12 defined PTV as GTV plus set-up error and respiratory movements. Stereotactic body .radiotherapy with high fraction dose was used in 11 out of 12 responding departments with fraction dose varying from 6 to 20 Gy,including 6 of which defined PTV of primary tumor as GTV plus 6-8 mm plus respiratory movements and set-up error, and 5 defined PTV of early stage lung cancer as GTV plus respiratory movements and set-up error. The consensus on delineation of primary tumor of the case discussion was that the appropriate window width and window level were 1600 Houasfield Units(HU) and -600 HU for lung window,and 400 HU and 20 HU for mediastinal window. The controversies was focused on whether the CTV for metastatic lymph nodes should be restricted as GTV plus 6-8 mm or enlarged to enclose all the involved lymph node region. Conclusions PIT of primary tumor and mediastinal metastatic lymph nodes should be GTV plus 6-8 mm plus respiratory movements plus set-up error. The basic controversies of target delineation are focused on the fraction dose and PIT range for early stage NSCLC, and on the possibility of defining the PIT as GTV plus respiratory movements and set-up error when treated with concurrent radiotherapy and full dose chemotherapy for locally advanced NSCLC.

Objective To prospectively determine the feasibility of high-resolution in vivo MR imaging in the evaluation of esophageal carcinoma invasion at 3.0 T.Methods One hundred and eighteen patients with esophageal carcinoma,proven by the gastroscopic biopsy,were prospectively studied using 3.0 T MR.The esophageal specimens were sectioned transversely to keep consistent in the orientation with the MR images,the histopathological stage was made and the thickness of the tumor on the largest diameter of the slice were measured.The MR images were reviewed in the transverse plane.According to the seventh American joint committee on cancer,the MR stage was made and the tumor's thickness was measured.The MR images and the histopathological slices were matched.The staging diagnostic efficacy of the MR imaging was evaluated with the histopathological results as the standard reference,Kappa test was used to compare the stage of MR imaging with that at the histopathological analysis.Bland-Altman scatterplots were used to compare the thickness of tumor measured on the MR images with that at the histopathological measurement.Results Ninety seven cases(82.2％,97/118) of MR stage were accurately made,including 7 T1a,15 T1b,18 T2,25 T3 and 32 T4a cases,furthermore,14 cases were over staged and 7 cased were underestimated.The MR stage was highly consistent with the histopathological stage (Kappa=0.772).The sensitivity for the staging of high-resolution MR imaging at 3.0 T was 58.3％(7/12) to 100.0％(32/32),the specificity was 95.3％ (82/86) to 98.1％ (104/106),and the accuracy was 91.5％ (108/118) to 96.6％ (114/118),respectively.Bland-Altman scatterplots demonstrated that the discrepancy of the mean thickness between the value obtained by three radiologists respectively and the histopathological analysis were 2.0,2.6 and 2.1 mm,which demonstrated a good consistency.Conclusion High-resolution MR images obtained at 3.0 T can be used to evaluate the depth of carcinoma invasion and provide excellent diagnostic accuracy for preoperative staging.

To evaluate the clinical effect of digital assisted chimeric deep circumflex iliac artery perforator flap (DCIAPF) in the reconstruction of mandibular composite defects. Methods From January, 2018 to January, 2019, 6 cases of mandibular tumor patients with postoperative defect within side were treated. Preoperative CTA was used to evaluate the deep branches of spin iliac artery.Digital simulation software and 3D printing technolo-gy was taken, vascularized iliac flap of the design guide of bone was made, and the rebuilding effect was simulated. DCIAPF was used to repair the defect of lower jawbone. The donor sites were sutured directly. The patients were fol-lowed-up in outpatient department for 3-6 months to evaluate the recovery of the patient′s shape, jaw height and oc-clusal function, as well as the complications in the donor area. Results Postoperation pathological examination re-sults: ameloblastoma in 2 cases, 4 cases of gingival cancer. The length of cut out ilium was 6.0-13.0 cm, carrying the flap area of 3.0 cm×1.0 cm-6.0 cm×5.0 cm.Six cases of DCIAPF and iliac bone flap survived.The shape, mandibular height and occlusal function were satisfactory.And no obvious complications were found in the donor area. Conclu-sion The blood supply of DCIAPF is rich with enough bone mass and height. The position of terminal skin perfora-tors is invariant. The complications of donor sites is less. With the help of digital technology, the accuracy of mandibular defect repair and the 3-dimensional wound repair can be realized, and provides an advantage condition for subsequent dental implant.It is one of the ideal method of reconstruction of mandibular defect.

Objective:To explore the application value of digital three-dimensional(3D) reconstruction technology in the repair of oral and maxillofacial defects with superficial inferior epigastric artery (SIEA) flap.Methods:Twelve cases of oral cancer patients, including 8 males and 4 females; aged (57.4±12.6) years, were selected from the Department of Oral and Maxillofacial Surgery, The First Affiliated Hospital of Bengbu Medical College from January 2018 to October 2019 and were proposed to repair with SIEA flap. There were 10 cases of squamous cell carcinoma, one case of adenoid cystic carcinoma and 1 case of mucinous epidermal carcinoma. The data were imported into AW4.7 software for post-processing. The left or right dominant donor area was selected to clarify the origin, diameter, alignment, and location of penetration point of the flap blood supply, and digital 3D reconstruction technology was used to guide the flap preoperative design.Results:Eleven cases were repaired by SIEA flap in 12 patients, one case was repaired by superficial iliac artery flap because the source artery was undiscovered, one case had venous vascular crisis after surgery, and the rest of the flap survived. In 11 patients repaired with SIEA flap, there was no significant difference between the preoperative SIEA diameter measured by CTA [(1.0±0.3) mm] and the actual measured value [(1.1±0.3) mm] ( P>0.05). The follow-up was 6 to 12 months, with an average of 10 months, and the donor-receiver areas were all healed in phase Ⅰ. No obvious complications occurred, and the abdominal scar was hidden. Conclusions:In the SIEA flap repair oral and maxillofacial defect reconstruction surgery, the use of digital 3D reconstruction technology can objectively reflect the diameter and the location of the superficial artery of the abdominal wall before surgery, effectively reduce the difficulty and risk of flap surgery.

Objective:To explore the role of digital three-dimensional printing technology and multifunctional occlusal splint in the treatment of mandibular fracture in children.Methods:From January 2006 to January 2022, 42 children with mandibular fracture were treated by Department of Stomatology, in The First Affiliated Hospital of Bengbu Medical College, including 25 males and 17 females. The patients, aged from 4 to 12 years, with the median age was 10 years old, were divided into observation group (22 cases) and routine group (20 cases) according to the treatment methods. In the observation group, the multifunctional occlusal splint was made before operation, and the CT data of the children were imported into Mimics software in".dicom"format, and the displaced mandible was virtually reset. The jaw reduction model was made by three-dimensional printing, and the surgical operation was simulated on the reduction model to determine the model and position of the internal fixation device and shape it. During the operation, the fracture was reduced and fixed according to the preoperative design. The conventional group was treated with open reduction and internal fixation of mandibular fracture by traditional methods, and the clinical application value was compared and analyzed through the intraoperative situation, occlusal relationship, and follow-up of the two groups.Results:The total intraoperative bleeding volume [(30.25±4.02) ml] and surgical time [(64.3±9.2) min] in the observation group were significantly lower than those in the conventional group [(35.13±5.69) ml and (84.6±13.9) min, respectively] ( F=6.18, P=0.003; F=1.32, P=0.001). The excellent and good rate of occlusal relationship in the observation group [96% (21/22)] was significantly higher than that in the conventional group [85% (17/20)] ( F=4.27, P=0.039). The incidence of complications, the observation group, 1 case of poor occlusion, 1 case of postoperative infection; In the routine group, there were 3 cases with poor occlusion, 1 case with nerve injury, 1 case with root injury and 1 case with tooth germ injury. Conclusions:The application of digitization three-dimensional printing technology combined with multifunctional occlusal splint in children′s mandibular fracture is minimally invasive, safe, efficient and accurate, and the clinical effect is good.

Objective:To investigate the clinical effect of thin superficial inferior epigastric artery flaps in repairing soft tissue defects after buccal cancer surgery.Methods:From January 2018 to October 2019, 6 patients with buccal cancer who underwent surgery were constructed with thin superficial inferior epigastric artery flaps, including 2 males and 4 females, aged 43 to 68 years, with an average of 61.5 years. Doppler ultrasound was utilized of all patients to design flap preoperatively . According to the size of the affected area defect, according to the shape and direction of the blood vessels, a thin superficial inferior epigastric artery flap was elevated above the Scarpas fascia layer and transferred to repair soft tissue defects after buccal cancer surgery. The survival and functional recovery of the flap were observed.Results:All 6 flaps survived. The superficial inferior epigastric artery flaps ranged from 5.0 cm×7.0 cm to 7.0 cm×9.0 cm. The thickness of the flaps ranged from 0.5 cm to 1.3 cm, and the average thickness was 0.8 cm. The pedicle length is 6.0-9.0 cm.Four of them anastomosed to the superficial inferior epigastric veins and companion vein, 2 cases only anastomized superficial inferior epigastric veins . The follow-up period ranged from 3 to 12 months, with an average of 10 months. The cheek shape was good, the mouth opening was normal, there was no obvious bloating, and no secondary surgery was required. Linear scars were left on the donor site, with concealed location and no impairment of abdominal wall function.Conclusions:The donor site of the thin superficial inferior epigastric artery flap is small, the scar is concealed, the cheek is not bloated, and the opening degree of mouth is satisfactory. It is a good choice for reconstructing postoperative defect of cheek cancer.

Objective:The aim of this study was to explore the application of maxillary osteotomy plate and positioning guide plate in maxillary Le Fort Ⅰ osteotomy to eliminate the postoperative error caused by condylar displacement.Methods:Patients suffered from skeletal malocclusion and needed Le Fort Ⅰ osteotomy between January 2018 and November 2020 were selected from the Department of Oral and Maxillofacial Surgery, the First Affiliated Hospital of Bengbu Medical College. All patients were scanned with 64 slice spiral CT. The DICOM format data were analyzed using the Simplant software to reconstruct the virtual three-dimensional model of the jaw before operation. Then, the measurement of indexes and the maxillary Le Fort Ⅰ osteotomy were carried out on the virtual three-dimensional model, respectively. 3D-printed osteotomy guide plate and positioning guide plate were used to determine the osteotomy line and the position of maxillary advancement. 3D-printed tooth supported occlusal plate was used to support the mandibular sagittal split and retraction. The differences of 10 indexes between the two groups (virtual operation and surgery) were analyzed by paired t test using SPSS 22.0. Results:A total of 8 patients (5 males and 3 females) needed maxillary Le Fort Ⅰ osteotomy aged from 18 to 39 years old were recorded. The deviation of age in these patients was 24.8. The 3D-printed guide plate and tooth supporting occlusal plate were positioned accurately in surgery. All the operations were successful with primary healing of the incision and stable occlusion, and without joint clicking. There was no significant difference on the 10 indexes between the groups of virtual operation and surgery ( P>0.05). Conclusions:The application of maxillary osteotomy plate and positioning guide plate can effectively and accurately control the three-dimensional movement of the maxilla and improve the precision of maxillary Le fort Ⅰ osteotomy in orthognathic surgery, making the surgical effect highly consistent with the preoperative design.