Nowadays,research-based teaching is a teaching model,which has been accepted and applied universally.This paper deals with the characteristics of research-based teaching,which has been applied into systematic anatomy experiment teaching.

BACKGROUND:Fluoride treatment of osteoporosis has been controversial.Literatures addressing the effect of fluoride on bone bio-mechanical parameters of femur in young rats are few.OBJECTIVE:To study the effects of fluoride on bone biomechanical parameters of femur in young rats.METHODS:Ninety 2-month-old SPF Sprague Dawley rats,half male and female,were randomly divided into 9 groups:control group(young,adult and long-time)and drug-administered group(young high-fluoride,young low-fluoride,adult high-fluoride,adut low-fluoride,long-term high-fluoride and long-term low-fluoride).Rats in the control group were orally administered with physiological saline,while in the drug-administered group were given orally with different dose fluoride at the corresponding times.After experiment,rats were sacrificed under anaesthesia.Three-point bending test was performed at the left femur.The effects of fluoride on maximum load and rigidity of femur were measured.RESULTS AND CONCLUSION:Compared with young control group,the maximum load and the rigidity of femur in the young high-fluoride group were decreased by 13.18%and 13.61%,respectively(P＜0.05),which had no dramatically difference in the young low-fluoride group.Compared with long-term high-fluoride group,the maximum load and the rigidity offemur in the young high-fluoride were decreased by 17.22%and 17.17%(P＜0.05),which were obvious increased in the long.term low-fluoride grou by 18.33%and 19.15%,respectively(P＜0.05).The maximum load and the rigidity of femur were strengthened in the adult high-fluoride and adult low-fluoride groups(P＜0.05).The results suggested that young rats are more sensitive to high-dose fluoride,which can reduce bone quality in rats.The negative effects on bone quailty of rats were gradually displayed as the prolongation of the period of fluoride.

BACKGROUND:The mechanical properties of monkeys are the closest to the human body.Monkey is the ideal animal model of osteoporosis research.OBJECTIVE:To explore the biomechanical properties of the long bones and vertebrae in rhesus monkeys.DESIGN.TIME AND SETTING:The mechanics experiment for the study was based on monkeys,which was completed in the South Medical University,Key Laboratory of Medical Biomechanics in Octobor 2006.MATERIALS:Four male macaca mulattas aged 17.5 years on average and three female crab-eating monkeys aged 9 years on average.METHODS:Long bones(femur,tibia,fibula,humerus,radius and ulna)and the third and fourth lumbar vertebrae of three adult crab-eating monkeys and four old macaca mulattes were teken to do four-point bending test,torsion test,indentation test and compression test respectively.MAIN OUTCOME MEASURES:①The results of compression experiments and indentation experiments in monkey vertebrae.②The maximum load and the rigidity factor in left side of long bone of monkeys.③The maximum torque(N·m)in the right side of long bone of monkeys.RESULTS:①In the four-point bending tests,the maximum Ioad of the left ulna,fibula,humerus,femur,tibia and radius in macaca mulattas were(574.16±163.53),(179.98±38.32),(1487.9±965.12),(1928.60±336.23),(1303.23±969.35),(559.92±1.12)N,respectively.While the rigidity factor of the left femur,tibia,fibula,humerus,radius and ulna in macaca mulattas were (53.49±14.22),(28.41±5.86),(114.22±13.24),(142.16±18.56).(101.11±15.46),(69.13±5.54)N/mm,respectively.The maximum load of the left femur,tibia.fibula,humerus,radius and ulna in crab-eating monkeys were(179.93±19.38),(53.82±5.31),(631.61±225.81),(726.07±245.69),(424.52±49.s0),(1 91.97±67.73)N,respectively;however,the rigidity factor of the left femur,tibia,fibula,humerus,radius and ulna in crab-eating monkeys were(21.45±2.63),(16.25±6.66),(68.5±12.22),(76.79±14.01),(41.80±2.79),(64.31±15.89)N/mm,respectively.②In the torsion test,the maximum torque of the right fibula,humerus,femur and tibia in macaca mulattas were(1.55±0.82),(22.26±4.26),(30.93±6.54),(17.49±4.04)N·m,respectively.The maximum torqua of the right fibula,humerus,femur,tibia in crab-eating monkeys were(0.81±0.15),(10.34±2.06),(11.58±0.76),(6.68±1.34)N·m,respectively;③In the compression test,the maximal compression load and the rigidity factor of L4 in macaca mulattas were (2811.21±403.90)N,and(69.47±8.92)N/mm,respectively;the maximal compression load and the rigidity factor of L4 in crab-eating monkeys were(1659.90±339.08)N,and(36.29±6.61)N/mm,respectively.④In the indentation test,the maximal indentation and the maximal anti-pressure of L_3 in macaca mulattas were(521.90±38.94)N,and(699.16±43.46)MPa,respectively;the maximal indentation and the maximal anti-pressure of L_3 in crab-eating monkeys were(614±145.94)N,and (815.92±193.69)MPa,respectively.CONCLUSION:Experimental data derived from the experiments demonstrated that rhesus monkeys as a kind of nonhuman primate animals have an important reference value in the animal studies of osteoporosis.

Objective To observe the effects of orexin-1 receptor inhibitor on proliferation and estrogenic differentiation of bone marrow mesenchymal stem cells ( BMSCs) . Methods BMSCs were isolated and cultured from Sprague-Dawley rats, and orexin-1 receptor inhibitor was prepared to different concentration of solutions:10-2 , 10-3 , 10-4 , 10-5 and 10-6 mol·L-1 . Then, the cells at passage 3 were cultured in orexin-1 receptor inhibitor solutions. The cell growth, alkaline phosphatase activity and osteocalcin secretion were measured by MTT, PNPP and ELISA, respectively. The mRNA expression levels of Runx2 and COL1A1 were detected by real-time quantitative PCR. Results The best concentration of orexin-1 receptor inhibitor for the proliferation of BMSCs was 1 × 10-4 mol·L-1 . Orexin-1 receptor inhibitor promoted the proliferation at concentration of 10-6 , 10-5 , 10-4 mol·L-1 in 3, 5 and 7 days. Orexin-1 receptor inhibitor at concentration of 10-6 , 10-5 and 10-4 mol·L-1 for 5 days significantly stimulated ALP activity. Orexin-1 receptor inhibitor significantly up-regulated Runx2 and COL1A1 mRNA expression at concentration of 10-6, 10-5, 10-4 mol·L-1 for 5 days (P<0.05). Conclusion Orexin-1 receptor inhibitor can promote BMSCs proliferation and stimulated ALP activity and osteocalcin secretion.

OBJECTIVETo evaluate the effects of health promotion for eight years on cardiovascular diseases based on the changes in knowledge (K), attitude (A) and behavior (B) (KAB) before and after intervention in rural population of Fangshan, Beijing.

METHODSFive townships in Fangshan District, Beijing were divided into intervention and control communities with cluster sampling. Totally 772 farmers were selected randomly for interviews with a questionnaire of KAB, including 424 in the intervention communities (IC) and 348 in the control communities (CC) in 1992. After community-based health promotion and education on cardiovascular prevention for eight years, 895 farmers, including 431 in IC and 464 in CC, were selected randomly again in 1999 to be interviewed with the same questionnaire of KAB used in 1992.

RESULTSFrom 1992 to 1999, knowledge of cardiovascular diseases was significantly improved in residents of IC (P < 0.01) and CC. Compared to the residents in CC, there was a net increase in knowledge in residents of IC. Significant improvement was found in 10 and 11 of the 18 items of knowledge in males and females (P < 0.01), respectively. Level of knowledge in cardiovascular diseases was significantly higher in the residents of IC than those of CC in 1999. Proportions of those with positive attitudes and appropriate behaviors were significantly elevated in the residents of IC (P < 0.01), as well as prevalence of smoking and alcohol drinking decreased. However, as compared to CC, attitude and behavior in most aspects in the residents of IC changed positively, but in few aspects changed negatively. It suggested knowledge improved better than attitude and behavior changed.

CONCLUSIONSCommunity-based health promotion and education for a longer term had obvious effects on improvement of knowledge in cardiovascular disease for rural population, but slower effects on changes in attitude and behavior, which suggested there still existed certain barriers to transform knowledge into healthy behavior.

Cardiovascular Diseases ; prevention & control ; China ; Female ; Health Knowledge, Attitudes, Practice ; Health Promotion ; Humans ; Male ; Rural Population ; Time Factors

Objective To explore the application of 3D printing templates for titanium plate contouring (TrPC) in pelvic ring surgery.Methods From May 2016 to June 2018,12 patients with pelvic ring injury were treated by internal fixation with 24 titanium plates at Department of Orthopedics and Trauma,Sanshui People's Hospital.After solid digital models of the damaged pelves of the patients were reconstructed from their CT images via software,the hollowed ones were created with the wall thickness of 1.2 mm.After the models of damaged pelves were restored to be intact,the templates for titanium plate contouring were designed based on the area of fixation and manufactured via a stereo lithography apparatus.The total manufacturing time and material consumption of 3D printing TTPC were recorded and compared with those of 3D printing solid and hollow models.Before operation,the titanium plates were contoured according to the templates.The time for preoperative shaping the plate and the time for intraoperative preparing the plate before installation were recorded.After operation,all patients underwent CT scan again for reconstruction of 3D models of the postoperative pelves which were compared with their corresponding preoperative ones in the software.Matta criteria were used to evaluate the pelvic reduction and Majeed criteria to evaluate the functional recovery 6 months after operation.Results All patients were followed up for 6 to 28 months (average,16.3 months).The total manufacturing time and material consumption of 3D printing a TTPC were significantly less than those of 3D printing a solid or hollow model (P ＜ 0.05).The time for preoperative shaping the plate was 12.8 ± 4.1 minutes and the time for intraoperative preparing the plate was 1.4 ± 1.1 minutes.The average deviation between the preoperative 3D models and the postoperative ones was 1.4 ± 1.1 mm.According to the Matta criteria for pelvic reduction,6 cases were excellent,4 good and 2 satisfactory.According to the Majeed criteria,the pelvic functions were excellent in 7 cases,good in 4,and fair in one.Conclusion Application of 3D printing TTPC in the surgery for pelvic ring injury is advantageous in lowering the costs of 3D printing and reducing the intraoperative time for contouring the titanium plate,leading to satisfactory outcomes.