Objective To explore the clinical characteristics of reperfusion arrhythmias (RA) in patients with ST segment el‐evation myocardial infarction(STEMI) after percutaneous coronary intervention (PCI) .Methods A total of 148 STEMI patients undergoing emergency PCI in our hospital from January 2010 to December 2014 were selected and divided into the RA group (71 cases) and non‐RA group (NRA group ,77 cases) according to whether RA occurring during PCI .The RA situation was observed . The relation between the infarct related artery and RA was analyzed ,the fall back situation of elevated ST segment was observed , the levels of cardiac troponin I (TnI) and creatine kinase isoenzyme MB (CK‐MB) and echocardiographic findings were compared between the two groups .Results The incidence rate of bradyarrhythmias in the left anterior descending coronary artery was signifi‐cantly lower than that in the right coronary artery and left circumflex artery ,while tachyarrhythmias in the left anterior descending coronary artery was higher than that in right coronary artery and left circumflex artery ,the differences were statistically significant (P<0 .05) .The opening time window and CK‐MB peak reaching time in the RA group were earlier than those in the NRA group , the fall amplitude of ST segment ,highest TnI and highest CK‐MB level in the RA group were higher tha those in the NRA group , the differences were statistically significant (P< 0 .05);among 48 cases of tachyarrhythmias ,tachyarrhythmia in 17 cases disap‐peared after intravenous drip or injection of lidocaine and which in 31 cases spontaneously disappeared without treatment ;among 23 cases of bradyarrhythmia ,bradyarrhythmia in 16 cases was controlled by intravenous injection of atropine ,which in 3 cases was con‐trolled within 1 week after placing temporary pacemaker and which in 4 cases was spontaneously disappeared without treatment . The incidence rate of main adverse events in the RA group was 2 .8% ,which was lower than 11 .7% in the NRA group ,the left ventricular ejection fraction in the RA group was significantly higher than that in the NRA group ,the end diastolic diameter and end systolic diameter of the left ventricle were significantly lower than those in the NRA group ,and the differences were statistically significant (P<0 .05) .Conclusion The incidence of RA in the patients with STEMI is higher ,which needs to adopt various effec‐tive methods to actively treat .

Objective To observe the correlation between platelet parameters , platelet activation marker and carotid intima-media thickness (CIMT) in patients with type 2 diabetes mellitus. Methods One hundred and ninety-five type 2 diabetic patients were enrolled in this study. The patients were divided into the normal control group, the CIMT increased group and the clot group according to the carotid intima-media thickness. Levels of platelet count (PLT), mean platelet volume (MPV), platelet distribution width (PDW), platelet hematocrit(PCT), urinary 11-dehydro-thromboxane B2 (11-DH-TXB2) and other clinical, biochemical characteristics were measured. Results (1) Levels of serum LDL-C, MPV, PDW, urinary 11-DH-TXB2 and clinical course in the clot group were higher than those in the CIMT increased group and the normal control group (P < 0.05). (2) Compared with the normal control group, the clinical course, serum LDL-C, MPV, PDW and urinary 11-DH-TXB2 were higher in the CIMT increased group (P < 0.05). (3) By using with spearman rank correlation test, carotid intima-media thickness was positively associated with age , course , BMI , GLU , GHbA1C , LDL-C , MPV , PDW and urinary 11-DH-TXB2, whereas carotid intima-media thickness was negative associated with HDL-C, PLT (both P < 0.05). (4) MPV, PDW and urinary11-DH-TXB2 were shown as the independent risk factors for CIMT. Conclusions Platelet activation marker and platelet parameters are associated with carotid intima-media thickness in patients with type 2 diabetes mellitus.

Objective To explore the polarization and proliferation of naive CD4+TT cells after preincubation with interleukin-2. Methods The expression of suppressor of cytokine signal (SOCS)-3 was detected by the real-time PCR in the naive T lymphocytes of DO11.10 TCR transgenic and C57BL/6N mice after they were preincubated by 50 U/ml of IL-2. The naive CD4+T T lymphocytes preincubated for 4 h by IL-2 were stimulated with ovalbumin (OVA) and inactivated BALB/c spleen cells, respectively. After 14 d, IL-12Rβ1, IL-12β2 and cytoplasm IL-4 (cyIL-4) were detected by flow cytometry. Results SOCS-3 in the naive CD4+T lymphocytes of DO11. 10 TCR transgenic and C57BL/6N mice reached the peak after preincu- bated by IL-2 for 6 h. The polarization to TH1 and the proliferation ability of naive CD4+ T lymphocytes stimulated with specific antigen and allogeneic antigen were inhibited conspicuously during the time of the peak of SOCS-3. Conclusion The expression of SOCS-3 in naive CD4+T lymphocytes can be upregulated by IL-2. The upregulation of SOCS-3 can suppress the polarization to TH1and the proliferation ability of naive CD4+T lymphocytes stimulated by specific antigen and allogeneic antigen.

Objective To investigate the application value of fetal umbilical cord blood hemoglobin analysis in the prenatal diag ‐nosis of thalassemia .Methods 113 couples were the carriers of the same gene type of thalassemia ,moreover the females were in the pregnant period of 24 - 30 pregnant weeks and performed the prenatal diagnosis .The fetal umbilical cord blood hemoglobin compo‐nents were analyzed by the full automatic capillary electrophoresis technique ,meanwhile the fetal thalassemia gene was detected .Re‐sults Among 113 fetuses ,the umbilical cord blood HbBart′s level in 11 cases of severe α thalassemia was 85 .0% - 95 .5% ,which in 9 cases of intermediate type α thalassemia was 22 .0% - 39 .5% ;the umbilical cord blood HbA level in 6 cases of severe β thalas‐semia was 0% - 0 .4% ,which in 17 cases of light type β thalassemia was 2 .1% - 12 .5% .Conclusion The fetal umbilical cord blood hemoglobin analysis could be used for rapid prenatal diagnosis of severe α ,β and intermediate type α thalassemia ,which can serve as a supplementary method for the prenatal diagnosis of thalassemia .

Objective To devolope a method for extracting DNA from dried blood spots (DBS)and optimizing the operating procedure,which could be applied to clinical gene diagnosis of thalassemia.And the cross contamination of DBS punching and the storage stability of DBS were studied.Methods A total of 1 50 blood specimens were collected,and DBS were prepared.Circles (3 mm in diameter)were punched in the DBS,and eluted with lysis buffer.The eluting method and operating procedure were opti-mized.Genomic DNA extracted from the elution solution by magnetic beads,and were performed thalassemia gene test.Finally jud-ging whether the results of DBS and whole blood were consistent.Two methods of thalassemia gene test were used in DBS and the compatibility of DBS processing method was verified.Judging whether there was cross contamination of DBS punching by the thalassemia gene test results of blank hole which were punched in the blank filter paper between thalassemia positive DBS.The DBS storage stability in thalassemia gene test was verified by detecting the DBS which were dry stored at room temperature for 6 and 9 months.Results 5 circles (3 mm in diameter)DBS were vibrating eluted at 55 ℃ for 1 hour,the DNA concentration extracted from the elution solution was 10-20 ng/μL,which was dissolved in 50 μL solution,and the DNA quality was good.The thalassemia gene test results of DBS and whole blood were the same,and the DBS results of two thalassemia gene test methods were the same too. The cross contamination of DBS punching was not detected in thalassemia gene test.The DBS which were dry stored at room tem-perature for 6 and 9 months could be stably performed thalassemia gene test.Conclusion DBS could be used to perform thalassemia gene test,which is accurate,convenient and stable.It is an ideal way for specimen referral of thalassemia gene test.

Objective:To investigate the mechanism of subjective cognitive decline(SCD)in resting-state by using regional homogeneity(ReHo)and functional connectivity(FC)in SCD patients.Methods:Resting-state functional magnetic resonance imaging(RS-fMRI)was performed in 25 SCD patients and 30 normal controls matched by sex, education and nationality.DPARSFA2.3 and SPM8 software were used to analyze and screen the brain areas with abnormal ReHo values in SCD group, with the posterior cingulated(PCC)/paruneus as seed points for whole-brain FC analysis.Results:Compared with the normal control group, the SCD group showed that ReHo values of right occipital gyrus and left precuneus were increased, and ReHo values of right inferior temporal gyrus, right orbital inferior frontal gyrus and bilateral thalamus were decreased(Voxel level, Alphasim correction, P<0.05). Using PCC/ precuneus as seed voxels, the whole brain functional connectivity analysis showed that the functional connectivity with cerebelum Crus 2 R was increased, and the functional connectivity with right orbital inferior frontal gyrus, left inferior temporal gyrus and temporal pole was reduced(Voxel level, Alphasim correction, all P<0.05). Conclusions:Default mode network may play an important role in the mechanism of SCD, and abnormalities in brain areas may first occur in PCC/precuneus.

Objective:To explore the effects of operation timing on postoperative complications and operative duration in children undergoing non-emergency operation for femoral neck fracture.Methods:Fifty-nine children and adolescents with femoral neck fracture were retrospectively analyzed who had been admitted to Department of Pediatric Orthopedics, Zhengzhou Orthopedic Hospital Affiliated to Henan University from February, 2015 to September, 2019. They were 39 boys and 20 girls with a mean age of 11.7 (7.1, 13.7) years. By Delbet fracture classification, 7 cases were type Ⅰ, 27 cases type Ⅱ, 20 cases type Ⅲ, and 5 cases type Ⅳ. The patients were divided into 4 groups by the time from injury to operation (TFITO): 17 cases were assigned into group A with TFITO from 24 to 48 hours, 14 cases into group B with TFITO from 49 to 72 hours, 12 cases into group C with TFITO from 73 to 96 hours, and 16 cases into group D with TFITO>96 hours. The effects of TFITO on postoperative complications and operative duration were analyzed.Results:There were no significant differences between the 4 groups in their preoperative general data, showing they were comparable ( P>0.05). This cohort was followed up for 12 to 62 months (average, 20 months). The operation time was not included for this study in 6 cases whose associated injury had to be treated simultaneously. The median operation time for the other 53 patients was 80 (70, 105) min. The correlation coefficient between TFITO and operation time was 0.098 ( P=0.484). Postoperative complications occurred in 37.3% of the patients (22/59), including 14 cases of avascular necrosis of femoral head. For groups A, B, C and D, the incidences of complications were 47.1% (8/17), 50.0% (7/14), 25.0% (3/12) and 25.0% (4/16) while the incidences of avascular necrosis of femoral head 23.5% (4/17), 31.3% (5/16), 16.7% (2/12) and 18.8% (3/16), showing insignificant differences between the 4 groups in all the comparisons ( P>0.05). Conclusion:The time from injury to operation may not increase operative duration or postoperative complications such as avascular necrosis of femoral head in children undergoing non-emergency operation for femoral neck fracture.

{L-End}Objective To study and develop a suitable scale to identify and assess risks of occupational stress in workplaces of enterprises, and to explore the establishment of a workplace occupational stress risk assessment method aimed at guiding enterprises to improve working conditions based on the electronics industry in Beijing City. {L-End}Methods The initial version of the Workplace Occupational Stress Risk Assessment Scale (WOSRAS) was constructed based on literature review and expert evaluation. A total of 1 284 employees from four electronics enterprises in Beijing City were selected as the research subjects using a convenient sampling method. Item analysis and exploratory factor analysis were used to determine the final items of the scale and test its reliability and validity. The method of percentile norms was used to establish risk assessment method for the electronics industry workplace and its stress sources, and the cut-off values of low, medium, high risk was graded by the 50th and 80th percentiles of the total score and the score of each dimension of the risk assessment scale. {L-End}Results i) Based on item analysis and exploratory factor analysis, a WOSRAS consisting of six dimensions and 23 items was constructed, which could explain 63.2% of the total variation of occupational stress. The results of confirmatory factor analysis showed that the root mean square error of approximation and standardized root mean square residual were both <0.080, and the comparative fit index and Tucker-Lewis index were both >0.900. The total criterion validity of the scale was 0.816. The total Cronbach's α coefficient of the scale was 0.835, and the Spearman-Brown coefficient was 0.802. ii) The cut-off values of WOSRAS scores for high, medium and low risk in electronics industry were <53.0, 53.0-60.0 and >60.0,respectively. According to the result, the workplace stress risk levels of the production, research and development, and logistics departments of the electronics industry in Beijing were medium risk, while the management department was low risk. {L-End}Conclusion The WOSRAS constructed in this study has good reliability and validity. The proposed risk assessment method can reflect the actual risk status of enterprises in the electronic industry and is convenient for widespread application.

{L-End}Objective To explore the suitable methods for individual occupational stress examination and evaluation for workers in China based on the electronics industry. {L-End}Methods A total of 1 164 workers from four electronics enterprises in Beijing City were selected as the research subjects using a convenient sampling method. The Occupational Stress Measurement Scale, which was developed based on the Japanese Brief Job Stress Questionnaire, was used to assess the occupational stress of the research subjects, and test the reliability and validity of the scale. Percentile norms and T-score norms were established, and the T-scores of the three dimensions of stress reaction (psychological reaction and physical symptoms), stress factors, and social support were divided into five stages using the normal distribution method with x¯±0.5 s and x¯±1.5 s, which was used to explore a proposed standard for assessing individual stress levels. {L-End}Results The revised scale consisted of 57 items, which could explain 64.0% of the total variation of occupational stress based on the result of item analysis and exploratory factor analysis. The results of confirmatory factor analysis showed that the model fitted well, with root mean square error of approximation of 0.052, standardized root mean square residual of 0.070, comparative fit index of 0.960, and Tucker-Lewis index of 0.958. The Cronbach's α coefficient of the scale was 0.951, and the Spearman-Brown coefficient was 0.837. Cronbach's α coefficients of the three dimensions ranged from 0.794 to 0.952, and the Spearman-Brown coefficients ranged from 0.737 to 0.850. The scores of the three dimensions of stress reaction, stress factors, and social support were (49.1±13.0), (44.9±7.7), and (18.1±3.6), respectively. Workers in the electronics industry met one of the following items were identified as the high level of occupational stress individuals: i) a score of stress reaction dimension ≥72.0 points; ii) a sum of stress factor and social support dimension scores ≥81.0 points, and a stress reaction dimension score ≥58.0 points. {L-End}Conclusion The Occupational Stress Measurement Scale and the criteria for determining high level of occupational stress can be used to assess the individual occupational stress levels of workers in the electronics industry in China. This method can provide a theoretical basis for the formulation of occupational stress examination and assessment for Chinese workers.

{L-End}Objective To analyze the current status of occupational stress and its influencing factors among workers in pharmaceutical enterprises in Beijing City. {L-End}Methods A total of 860 employees from six pharmaceutical enterprises in Beijing City were selected as the research subjects using convenience sampling method. The Chinese version of the New Brief Job Stress Questionnaire was used to evaluate the occupational stress, and multiple linear regression analysis was used to analyze the influencing factors of occupational stress. {L-End}Results The detection rate of high occupational stress was 1.40% (12/860). The results of multiple linear regression analysis showed that the workers with higher education level and longer length of service had a higher risk of high occupational stress (all P<0.01). Workers who were satisfied with their jobs had a lower risk of high occupational stress than those who were unsatisfied with their jobs (P<0.01). Workers who were satisfied with life had a significantly lower risk of high occupational stress than those who were unsatisfied with life (P<0.01). {L-End}Conclusion The detection rate of high occupational stress in workers of pharmaceutical enterprises is relatively low. Occupational stress is mainly affected by individual factors such as education level and length of service, and work and life satisfaction. Improving job and life satisfaction is helpful to reduce occupational stress level.