Objective To analyze the potential association between the single ucleotide polymorphisms(SNP) of the vascular endothelial growth factor(VEGF) gene with the risk of endometriosis by meta-analysis.Methods Published case-control studies about the influence of VEGF polymorphisms on endometriosis were searched and screened in Medline,the Cochrane library,China National Knowledge Internet(CNKI),Chinese Biological Medicine Disk ( CBM ),data base of Wanfang and Foreign Medical Journal Full-Text Serv ice(FMJS).RevMan 5.0 software was used for meta-analysis.Results Finally,there were 9 literatures including 1610 endometrisis patients and 1643 controls cases,which were eligible for the criteria to investigating the VEGF SNP about - 460C/T,+ 405C/G and + 936C/T.The results of metaanalysis showed that there was no evidence for association between endometriosis and the VEGF -460C/T SNP in the genotype or allele frequencies distribution ( P ＞ 0.05 ).Significant differences were found between the frequencies distribution of VEGF + 405CC genotype( P =0.009,OR =1.45,95％ CI:1.10 - 1.91 ) and + 405 C allele ( P =0.020,OR =1.19,95 ％ CI:1.03 - 1.38 ),also between the + 936CC genotype ( P =0.050,OR=0.81,95％CI:0.66-1.00) and +936T allele (P=0.040,OR=1.20,95％CI:1.01 -1.43).Conclusions The VEGF + 405C/G and + 936C/T SNP may be associated with the risk of endometriosis.Women carrying the + 405C or the + 936T allele could significantly increase the risk of developing endometriosis.

Objective:To investigate the status of the professional construction of head nurses in the tertiary hospitals of Shandong Province, and to master the professional cognition and attitude of the head nurses, and to provide reference for the formulation of the professional construction plan for the head nurses in the tertiary hospitals.Methods:A cross-sectional survey of 2 629 head nurses from 55 tertiary hospitals in Shandong Province was conducted using a self-designed questionnaire survey on the status of professional construction of head nurses in tertiary hospitals in Shandong Province.Results:The selection and training system of the head nurses in the tertiary hospitals in Shandong Province was mature. 93.00%(2 357/2 534) of the head nurses were undergraduate degrees, 18.40%(465/2 534) of the head nurses used all the working hours for nursing management, and 86.00%(2 179/2 534) were the main economic sources with the current position; 68.20%(1 728/2 534) were believed that the head nurse should be a trained nurse, 87.90%(2 227/2 534) thought that the head nurse′s professional construction was necessary, and the professional feasibility score was 77.93±19.75. The regression analysis showed that the factors affecting the head nurse′s own professional construction were age, satisfaction with salary satisfaction and self-worth ( P<0.05); 32.50%(257/791) of the head nurses suggested improving the management training system, 20.61%(163/791) recommended that the hospital should pay attention to the professional construction of the head nurse, and 7.33%(58/791) recommended establishing the standardization of professional standards. Conclusions:To improve the investment time of the head nurses and encourage the head nurses to continue the education management; the hospital should appropriately reduce the age requirements of the head nurses and improve the salary; establish a sound professional system and management training system for the head nurses, and comprehensively recommend the head nurses. Promote the professional development of the head nurse team

Objective: To compare the surgical accuracy of the 3D printing surgical guide and traditional occlusal splint in the treatment of skeletal facial asymmetry cases. Methods: 12 facial asymmetric patients underwent joint orthognathic and orthodontics treatments were included in this research. In the 3D printing group (n=6) the pre-surgical CT scan for the skeleton and laser scan for the dentures were performed and 3D orthognathic procedures including Le FortⅠ and BSSRO combined with genioplasty were planned. The 3D printing surgical guides were manufactured and applied during surgeries. Another 6 cases were received same procedures by traditional occlusal splint techniques as the control group. Post-surgical CT reconstruction and 3D superimposition with pre-surgical planning was carried out for outcome comparison. Results: The maximal error of maxillar was 0.65 mm and average error was less than 1 mm in 3D printing group, while the maxillary maximal error was 2.11 mm and average error was greater than 1 mm in traditional group which showed the statistical significance (P<0.05). Conclusions The usage of 3D printing surgical guide could improve the orthognathic surgical precision by controlling the jaw bone in a three-dimensional way.

BACKGROUND:With the innovation of examination technique,the number of patients with spinal metastases in different stages is increasing year by year.Percutaneous vertebroplasty is an important treatment for spinal metastases;however,there is no report on the biomechanical effect in different stages and different activities after operation. OBJECTIVE:To simulate thoracic T10 bone stress and displacement of the different locations of the tumor metastasis based on the three-dimensional finite element model. METHODS:According to thoracic three-dimensional CT images of a 30-year-old healthy male,Mimics software was used to construct a three-dimensional geometric model of thoracic vertebrae(T9-T11),including ribs,ligaments and intervertebral discs.Three-dimensional models of T9-T11 vertebral bodies and different parts of the posterior thoracic vertebrae invaded by thoracic metastatic tumors were simulated,including the control group with intact vertebral structure,unilateral metastasis involving the vertebral body area(experimental group 1),unilateral metastasis involving the vertebral body and pedicle area(experimental group 2),unilateral metastasis involving the vertebral body,pedicle and transverse process area(experimental group 3),and bilateral metastasis involving the vertebral body,pedicle and transverse process area(experimental group 4).Abaqus software was used to create a three-dimensional finite element model.The von Mises stress distribution and the displacement of the model were analyzed under the loading condition,buckling condition,extension condition,and rotation condition. RESULTS AND CONCLUSION:(1)In the study of the maximum total displacement of loading points in different experimental groups under loading,flexion,extension,and rotation conditions,with the increase of metastatic tumor invasion site and invasion surface,the total displacement of loading points increased,and the overall stiffness decreased,especially the total displacement of loading points in experimental group 4 was the largest.(2)Under flexion condition,the maximum Von Mises stress value increased significantly after vertebral body and pedicle destruction,while the maximum Von Mises stress value was almost unchanged when the thoracocostal joint destruction was added.(3)On the basis of finite element analysis and simulation of bone tumor model,the elements in the bone cement region were set as a single set,and the bone cement region was set as the corresponding material properties to simulate bone cement filling.The results showed that the maximum total displacement under loading,flexion,extension,and rotation conditions was less than that of each experimental group.(4)The maximum stress values of the simulated percutaneous vertebroplasty patients in the loading,flexion,extension and rotation conditions were significantly lower than those of the femoral model.(5)It is concluded that the three-dimensional finite element model based on thoracic T9-T11 conducive to the biomechanics characteristics of thoracic vertebrae tumor metastasis,and on the basis of the thoracic vertebrae tumor metastasis model can accurately simulate load point after percutaneous vertebral body under different conditions of total displacement and the maximum Von Mises stress situation.

Objective:To identify the development trajectories of self-neglect behavior in older adults and explore the associated influencing factors.Methods:A fixed cohort was constructed based on the data from three surveys of Chinese longitudinal healthy longevity survey (CLHLS) from 2011 to 2018. A total of eight variables from 4 dimensions including living environment, lifestyle, social interaction, and health care were selected to evaluate self-neglect. Group-based trajectory model was used to identify the development trajectory of self-neglect behavior in the older adults, and polynomial Logistic regression model was used to explore its influencing factors by Stata 16.1.Results:Finally, 2 754 older adults aged 60 and above were included.The development trajectory of self-neglect behavior in older adults, based on the group-based trajectory model, can be classified into stable-low group ( n=268, 9.7%), descending-moderate group ( n=2 224, 80.8%), and decreasing-high group ( n=262, 9.5%). Polynomial Logistic regression showed that, compared with stable-low group, living in rural areas ( B=1.116, OR=3.053, 95% CI= 2.278-4.091) and higher activities of daily living scores( B=0.137, OR=1.147, 95% CI=1.046-1.258) were the risk factors of descending-moderate group. Education levels with 1-6 years( B=-0.398, OR=0.672, 95% CI=0.469-0.963), >6 years( B=-1.072, OR=0.342, 95% CI=0.229-0.513), being married( B=-0.476, OR=0.621, 95% CI=0.444-0.870), self-reported good health( B=-0.808, OR=0.446, 95% CI= 0.213-0.932), improved health status( B=-0.704, OR=0.495, 95% CI=0.320-0.766), self-reported average economic status( B=-1.065, OR=0.345, 95% CI=0.148-0.802), self-reported good economic status( B=-1.634, OR=0.195, 95% CI=0.082-0.467), and a higher cognition score( B=-0.142, OR=0.867, 95% CI=0.798-0.942) served as protective factors of descending-moderate group. In addition to the above factors, being in the age group of 75-89 years( B=0.481, OR=1.617, 95% CI=1.057-2.473) was a risk factor for decreasing-high group compared to stable-low group. Conclusions:Three types of self-neglect behavior trajectories among older adults were identified in this study, suggesting that physical health and economy are the influencing factors of the development trajectory of self-neglect of the elderly.

The standardized training system for physicians has been implemented for many years in China. Based on the current situation of neurosurgery specialist training and the sub-professional development, the study discusses the specific plan and direction of glioma sub-professional physicians training from the aspects of glioma sub-professional physicians training outline, training content, requirements of glioma sub-professional training base, training assessment methods and training management. It provided reference for the training of neurosurgical glioma professionals in China, so as to make glioma receive comprehensive and standardized treatment.

Objective To evaluate the effectiveness of computer aided design (CAD) and three bit printing in the management of orthognathic surgery.Methods A total of 5 cases of patients with jaw deformity were involved in this study;jaw teeth and CT scanning laser scanning hefore surgery,virtual surgery design of 3D reconstruction and fusion data were analyzed,according to the design scheme of double jaw surgery combined with genioplasty;design and 3D printing of maxillary Le Fort Ⅰ osteotomy,genioplasty titanium alloy resin osteotomy and positioning guide,sagittal split ramus osteotomy by 3D printing and plate technology were used in this approach.The postoperative results were compared with the surgical planning by three-dimensional measurement and statistical analysis.Results When the operation guide plate was applied smoothly,the maximum error for maxilla was 1.2 mm (0.3-1.2 mm),and the maximum error for genioplasty was 1.7 mm,(0.5-1.7 mm),and the mean error was less than 1 mm.Follow-up for 12 months showed no adverse reaction.Conclusions Three dimensional printing surgical guide plate can accurately provide the osteotomy information,effectively control the jaw movement,and improve the orthognathic surgery accuracy of patients with partial jaw deformity.

Objective To develop and validate a new genioplasty templates system for monoblock osseous genioplasty.Methods Thirty-six patients with chin deformities were enrolled in this study.The chin template system included a cutting guide and a repositioning guide for a genioplasty.Chin templates were designed in a computer and fabricated using a three-dimensional printing technique.The accuracy of the genioplasty templates were assessed by comparing the actual postoperative outcomes with the virtual plan.Results All genioplasty was successfully completed by the template system.The largest linear rootmean-square deviation(RMSD) between the planned and the postoperative chin segments was 1.16 mm and the largest angular RMSD was 3.06°.Conclusions The results showed that the chin template system provides a reliable method for transfer of genioplasty planning.The operation precision of the genioplasty can be improved by using the surgical templates system.

Objective To evaluate the results of the orthognathic surgery with computer aided simulation-three-dimensional(3D) printed surgical guide and dental model surgery in the treatmemt of patients with mandibular excess and facial asymmetries.Methods The coordinate system was built in ProPlan CMF 2.0 software,and the horizontal plane consisted of PoL,PoR,OrL,middle sagittal plane through nasion point and basion point and the plane perpendicular to the horizontal plane,coronoid plane through nasion point and the plane perpendicular to the horizontal plane and middle sagittal plane.The orientation of maxilla and mandibular distal segment was calculated by each triangle(U 1-U6L-U6R,L1-L6L-L6R,Me-M5L-M5R) before and after orthognathic surgery.A total of 60 mandibular excess patients with facial asymmetries were enrolled in this retrospective study.They were divided into two groups,group I with computer aided simulation,group Ⅱ with dental model surgery.The difference of maxillary occlusal plane roll and yaw angle,mandibular occlusal plane roll and yaw angle,and mandibular body plane roll and yaw angle were calculated.Statistical analysis was performed with SPSS 17.0 software.Results The yaw angle of mandibular occlusal plane of the dental model surgery and computer aided simulation was 0.36°± 0.48° and 0.84° ±0.36° (P=0.043),respectively.The roll angle of mandibular occlusal plane of the dental model surgery and computer aided simulation was 0.26°±0.79° and 0.54°±0.40°(P=0.032),respectively.The yaw angle of mandibular body plane of the dental model surgery and computer aided simulation was 0.60°± 1.04° and 0.23°±0.52°(P=0.008),respectively.The roll angle of mandibular body plane of the dental model surgery and computer aided simulation was 0.82°± 0.72° and 0.53°± 0.37° (P=0.028),respectively.The changes in computer aided simulation group were more obvious than that in the dental model surgery group,but the difference was not significant in the yaw angle of maxillary occlusal plane and the roll angle of maxillary occlusal plane between the two groups(P ＞ 0.05).Conclusions It was more effective to correct mnandibular asymmetry by computer aided simulation than dental model surgery.

Objective To explore the anti-inflammatory effect of Qingre Jiedu(QRJD)formula on mice with gout and its effect on gut microbiota.Methods Forty C57BL/6 mice weighing 20～22 g were divided into control(CON),model(MOD),allopurinol(ALLO),and QRJD formula(QRJD)groups,and i.g.10 g/0.1 mL carboxymethyl cellulose was administered to the CON every morning from 1 to 35 days.A hyperuricemia mouse model was prepared by intragastric injection of a potassium oxalic acid(500 mg/kg)and yeast extract(10 g/kg)suspension.On day 29,50 μL sterile carboxymethyl cellulose was injected into the right ankle of mice in the CON group under isoflurane-induced anesthesia,and a gouty arthritis model was prepared by injecting the same volume of sodium urate(50 mg/mL)into the right ankle of mice in the other groups.Each group was treated with corresponding drugs every day.On day 35,samples were collected from mice that had been fasted for 6 hours without water.Blood indexes,such as uric acid,creatinine,and urea nitrogen,were assessed.Hematoxylin-eosin and saffranine O-fast green staining was performed on ankle joints.Anti-inflammatory indexes of interleukin-10(IL-10)and transforming growth factor-β1(TGF-β1)were detected by ankle joints immunohistochemical assay.The cecum contents of mice were collected,and changes in gut microbiota were analyzed by high-throughput sequencing of 16S rDNA.Results(1)After 7 days of treatment,compared with the MOD group,QRJD formula effectively reduced the blood concentrations of uric acid(P＜0.001),creatinine(P＜0.01),and urea nitrogen(P＜0.05),and effectively protected renal functions.(2)Compared with the MOD group,HE staining showed that synovial hyperplasia and inflammatory cell infiltration were reduced in the QRJD formula group after treatment.The cartilage arrangement of the compound was more orderly than before,cartilage destruction was less than that in the MOD group,and no matrix loss was observed.(3)Immunohistochemical analysis of the ankle joint indicated that IL-10 and TGF-β1 were not significantly increased in CON and MOD groups.Compared with the MOD group,IL-10 and TGF-β1 expression in the QRJD formula group were increased(P＜0.05).(4)In terms of biodiversity,the number of MOD-specific OTUs increased by 75 compared to the CON group,while the QRJD was able to reduce the number of MOD-specific OTUs to more closely resemble the CON group;no significant difference was found in α-diversity among the four groups(P＜0.05),whereas β-diversity was more similar to the CON group(P=0.001).(5)Compared with the CON group,the MOD group exhibited increased abundances(P＜0.05)of Ruminococcaceae spp.,Dubosiella sp.,Tyzzerella sp.,Ileibacterium sp.,and Bacteroidales spp..In contrast to the MOD group,the QRJD formula group showed elevated abundances(P＜0.05)of Lactobacillus sp.,Ligilactobacillus sp.,and Bacteroides sp..Furthermore,an interaction network of gut microbiota indicated mutual interactions among these microorganisms.(6)In the correlation analysis between gut microbiota and renal functions as well as anti-inflammatory factors,the relative abundances of Dubosiella sp.,Tyzzerella sp.,and Bacteroidales spp.were significantly positively correlated to SUA and SCR(P＜0.05).However,Lactobacillus sp.,Ligilactobacillus sp.,and Mitochondria spp.exhibited a positive correlation to anti-inflammatory factors IL-10 and TGF-β1 with a more significant association observed for TGF-β1(P＜0.05).(7)COG function prediction suggested that the functions of the QRJD formula group were concentrated on inorganic ion transport and metabolism,and carbohydrate transport and metabolism.Conclusions QRJD effectively modulates immune inflammation and gut microbiota dysbiosis,thereby treating gout.Its mechanism of gout prevention and treatment may involve regulation of gut microbiota diversity and abundance,as well as the control of the abundance of differential bacterial species,such as Ruminococcaceae spp.,Dubosiella sp.,and Lactobacillus sp.,to achieve gout therapy.