Transbronchial fine needle aspiration(TBNA) is one of the cytologic methods in diagnosing lung cancers. TBNA can be used in cases of hilar, mediastinal or lung masses adjacent to the bronchi. We analyzed and compaired the findings of 27 cases of TBNA and bronchial washing and brushing(BW/BB) in lung cancers confirmed by either biopsy or surgical resection between Jun, 1996 and May, 1997 in Asan Medical Center. They were 18 cases of non-small cell carcinomas(eight squamous cell carcinomas, nine adenocarcinomas, and one large cell undifferentiated carcinoma), eight cases of small cell carcinomas, and one case of metastatic hepatocellular carcinoma. The sensitivity of TBNA was 37%(10/27) and false negative was 63%(17/27). Although the sensitivity of BW/BB was 56%(15/27), it was not different statistically from that of TBNA(Chi square, p=0.38). Overall sensitivity of TBNA and BW/BB in this series was 70%(19/27). Forty-seven percent of false negative TBNA(8/17) were positive in BW/BB. The findings suggest that the addition of TBNA to the standard BW/BB increases diagnostic yield in cytologic diagnosis of lung cancer.
Adenocarcinoma ; Biopsy ; Biopsy, Fine-Needle* ; Bronchi ; Carcinoma, Hepatocellular ; Carcinoma, Small Cell ; Carcinoma, Squamous Cell ; Chungcheongnam-do ; Diagnosis ; Lung Neoplasms* ; Lung* ; Needles

A 35-year-old man was admitted with a 20 day history of generalized edema and muscular weakness of the lower extremities. He was alert with a pale puffy face and an ejection murmur was heard at the cardiac apex. The electrocardiogram disclosed low voltage, first degree atrioventricular block, and a right bundle branch block. During the hospitalization an intractable diastolic hypotension developed, which measured 0 mmHg at the lowest point. At that time the echocardiogram revealed a dilated, akinetic right ventricle. Eventually a multiorgan failure developed and an autopsy following his death presented a fibrofatty replacement of the right ventricular myocardium. This might be a case of an arrhythmogenic right ventricular dysplasia/cardiomyopathy, which is usually characterized clinically by a ventricular tachycardia and may cause a sudden death in young adults.
Adult ; Atrioventricular Block ; Autopsy* ; Bundle-Branch Block ; Death, Sudden ; Edema ; Electrocardiography ; Heart Ventricles ; Hospitalization ; Humans ; Hypotension ; Lower Extremity ; Muscle Weakness ; Myocardium ; Systolic Murmurs ; Tachycardia, Ventricular ; Young Adult

BACKGROUND: Proteins of the Bcl-2 family are intracellular membrane-associated proteins that regulate programmed cell death either positively or negatively by as yet unknown mechanism. Bcl-2 family proteins have an antiapoptotic function, such as the Bcl-2, the long form of Bcl-x and Mcl-l, or a proapoptotic function, like the short form of Bcl-x and Bax. To investigate the potential role of Bcl-2 family proteins in thyroid tumorigenesis, the authors examined the pattern of expression of the Bel-2 family proteins in various thyroid neoplasms. METHODS: Bcl-2 family proteins, including Bcl-2, Bcl-x, Mcl-1 and Bax proteins were immunohistochemically stained in 57 cases of various thyroid neoplasms using formalin-fixed and paraffin embedded tissues; 18 cases of papillary carcinoma, 6 cases of medullary carcinoma, 4 cases of anaplastic carcinoma, 10 cases of follicular adenoma, 9 cases of adenomatous goiter, and 10 autopsy cases of fetal thyroid galnd. The intensity and frequency of the immunostaining were evaluated with the program of Image-Pro Plus Version 3.0 for image analysis. RESULT: Consistent expression of Bcl-2, Mcl-1, and Bax proteins were present in the surrounding normal thyroid tissue, however the expression of Bcl-x protein was not observed. Compare to the expression patterns of adenomatous goiter, and fetal and surrounding normal thyroid tissues, papillary and anaplastic carcinomas showed the decreased Bcl-2 and increased Bcl-x protein expressions(p (0.05). Medullary carcinoma revealed the increased Bcl-x protein expression only(p 0.05). CONCLUSION: These data suggest that combined patterns of decreased Bcl-2 and increased Bcl-x protein expressions may eontribute to the carcinogenesis of thyroid cancers originated from thyroid follicular cells, and an increased expression of Bcl-x protein may be related to the pathogenesis of medullary carcinoma from parafollicular C cells.
Adenoma ; Autopsy ; bcl-2-Associated X Protein ; bcl-X Protein ; Carcinogenesis ; Carcinoma ; Carcinoma, Medullary ; Carcinoma, Papillary ; Cell Death ; Goiter ; Humans ; Membrane Proteins ; Paraffin ; Thyroid Gland* ; Thyroid Neoplasms*

Traditional technique for the treatment of osmidrosis had a few problems, such as difficulty in exposing axilla because of the scar that is left after the operation, and sometimes brought misunderstanding of breast augmentation. I have designed a new operation method by improving the existing suction cannula in order to reduce the recurrence rate, by raising the apocrine gland removal to the incision technique level while maintaining the existing suction technique merits. The new method is based on negative pressure of suction, but has a scraping function added for removing the subdermal gland appropriately. It is named Scrape & Inhalation Technique(SIT). This was enforced to 104 patients from January, 2004 to December, 2004. The follow-up on the operation results were examined for at least 3 months and 19 months maximum. Recurrence and sequela were checked by direct counseling, telephone, e-mail, and cell phone messages after the operation. Among the subjects, 5 patients showed recurrence and received operation again. The others were totally satisfied with results. One patient had skin necrosis, but its diameter was not over 2cm and was completely treated by dressing having small scar. Inconvenience such as the epidermis sloughing was found in many patients, but it was treated well without any scars by simple dressing. Sequela such as permanent motor abnormality or dysaesthesia was not found at all.
Apocrine Glands ; Axilla ; Bandages ; Breast ; Catheters ; Cellular Phone ; Cicatrix ; Counseling ; Electronic Mail ; Epidermis ; Follow-Up Studies ; Humans ; Inhalation* ; Lipectomy ; Necrosis ; Recurrence ; Skin ; Suction ; Telephone

OBJECTIVES: Although the coating of surface sealants to dental composite resin may potentially reduce bacterial adhesion, there seems to be little information regarding this issue. This preliminary in vitro study investigated the adhesion of Streptococcus mutans (S. mutans) on the dental composite resins coated with three commercial surface sealants. MATERIALS AND METHODS: Composite resin (Filtek Z250) discs (8 mm in diameter, 1 mm in thickness) were fabricated in a mold covered with a Mylar strip (control). In group PoGo, the surfaces were polished with PoGo. In groups PS, OG, and FP, the surfaces polished with PoGo were coated with the corresponding surface sealants (PermaSeal, PS; OptiGuard, OG; Fortify Plus, FP). The surfaces of the materials and S. mutans cells were characterized by various methods. S. mutans adhesion to the surfaces was quantitatively evaluated using flow cytometry (n = 9). RESULTS: Group OG achieved the lowest water contact angle among all groups tested (p < 0.001). The cell surface of S. mutans tested showed hydrophobic characteristics. Group PoGo exhibited the greatest bacterial adhesion among all groups tested (p < 0.001). The sealant-coated groups showed statistically similar (groups PS and FP, p > 0.05) or significantly lower (group OG, p < 0.001) bacterial adhesion when compared with the control group. CONCLUSIONS: The application of the surface sealants significantly reduced S. mutans adhesion to the composite resin polished with the PoGo.
Bacterial Adhesion ; Composite Resins ; Flow Cytometry ; Fungi ; In Vitro Techniques* ; Streptococcus mutans* ; Streptococcus* ; Surface Properties ; Water

OBJECTIVES: To determine the optimal timing for post space preparation of root canals sealed with epoxy resin-based AH Plus sealer in terms of its polymerization and influence on apical leakage. MATERIALS AND METHODS: The epoxy polymerization of AH Plus (Dentsply DeTrey) as a function of time after mixing (8, 24, and 72 hours, and 1 week) was evaluated using Fourier transform infrared (FTIR) spectroscopy and microhardness measurements. The change in the glass transition temperature (Tg ) of the material with time was also investigated using differential scanning calorimetry (DSC). Fifty extracted human single-rooted premolars were filled with gutta-percha and AH Plus, and randomly separated into five groups (n = 10) based on post space preparation timing (immediately after root canal obturation and 8, 24, and 72 hours, and 1 week after root canal obturation). The extent of apical leakage (mm) of the five groups was compared using a dye leakage test. Each dataset was statistically analyzed by one-way analysis of variance and Tukey's post hoc test (α = 0.05). RESULTS: Continuous epoxy polymerization of the material with time was observed. Although the T(g) values of the material gradually increased with time, the specimens presented no clear T(g) value at 1 week after mixing. When the post space was prepared 1 week after root canal obturation, the leakage was significantly higher than in the other groups (p < 0.05), among which there was no significant difference in leakage. CONCLUSIONS: Poor apical seal was detected when post space preparation was delayed until 1 week after root canal obturation.
Bicuspid ; Calorimetry, Differential Scanning ; Dataset ; Dental Pulp Cavity* ; Fourier Analysis ; Glass ; Gutta-Percha ; Humans ; Polymerization ; Polymers ; Post and Core Technique ; Root Canal Obturation ; Root Canal Preparation ; Spectrum Analysis ; Transition Temperature

This study aimed to investigate whether pre-curing the universal adhesives affect the resin bonding to zirconia ceramic. Two commercial universal adhesives (All-Bond Universal, ABU; Single Bond Universal Adhesive, SBU) were tested in comparison with a conventional zirconia primer (Z-Prime Plus, ZPP). Air-abraded zirconia specimens were divided into six groups, to which different priming agents were applied with or without photo-polymerization. After resin cylinders were built on the primed zirconia surface using a resin cement (Duo-Link), all bonded specimens were stored in water at 37℃ for 24 hours and half of them (n = 12) were additionally thermocycled 5,000 times. A shear bond strength test was performed at a crosshead speed of 0.5 mm/minute and failure modes were assessed using an optical microscope at 25× magnification. Before thermocycling, the light-cured specimens of ABU and SBU showed higher bond strengths than the uncured ones of the materials (p<0.05), whereas no significant difference was found between the pre-cured and uncured specimens of ZPP (p > 0.05). After thermal aging, there were significant decreases in the bond strength for all specimens treated with the universal adhesives (p<0.05). However, ZPP produced no significant difference after aging (p > 0.05) and attained higher bond strength values for both the pre-cured and uncured specimens when compared to the two universal adhesives (p<0.05). Adhesive failures were predominant in all test groups and thermocycling resulted in the higher incidences of adhesive failures for the uncured groups, which was not shown in the pre-cured groups.
Adhesives ; Aging ; Ceramics ; Incidence ; Resin Cements ; Water

PURPOSE: The aim of this Fourier transform infrared (FTIR) spectroscopic study was to measure the degree of conversion (DC) of dual-cured resin cements light-irradiated through zirconia ceramic disks with different thicknesses using various light-curing methods. MATERIALS AND METHODS: Zirconia ceramic disks (KT12) with three different thicknesses (1.0, 2.0, and 4.0 mm) were prepared. The light transmittance of the disks was measured using ultraviolet visible near-infrared spectroscopy. Four different light-curing protocols were used by combining two curing light modes (Elipar TriLight (standard mode) and bluephase G2 (high power mode)) with light-exposure times of 40 and 120 seconds. The DCs of the two dual-cured resin cements (Duo-Link and Panavia F2.0) light-irradiated through the disks was analyzed at three time intervals (3, 7, and 10 minutes) by FTIR spectroscopy. The data was analyzed using repeated measures ANOVA (alpha=.05).Two-way ANOVA and Tukey post hoc test were used to analyze the 10 minute DC results. RESULTS: The 1.0 mm thick disk exhibited low light transmittance (<25%), and the transmittance decreased considerably with increasing disk thickness. All groups exhibited significantly higher 10 minute DC values than the 3 or 7 minute values (P<.05), but some exceptions were observed in Duo-Link. Two-way ANOVA revealed that the influence of the zirconia disk thickness on the 10 minute DC was dependent on the light-curing methods (P<.001). This finding was still valid even at 4.0 mm thickness, where substantial light attenuation took place. CONCLUSION: The curing of the dual-cured resin cements was affected significantly by the light-curing technique, even though the additional chemical polymerization mechanism worked effectively.
Ceramics* ; Fourier Analysis ; Methods ; Polymerization ; Polymers ; Resin Cements* ; Spectroscopy, Fourier Transform Infrared ; Spectroscopy, Near-Infrared ; Spectrum Analysis ; Zirconium

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at 37degrees C for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with alpha = 0.05. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).
Acrylic Resins ; Composite Resins ; Hardness ; Light ; Methacrylates ; Polymerization ; Polymers ; Polyurethanes

OBJECTIVES: The aim of this study was to determine an appropriate application duration of sodium ascorbate (SA) antioxidant gel in reducing microleakage of bonded composite restoration in intracoronally-bleached teeth. MATERIALS AND METHODS: Eighty endodontically-treated human incisors were randomly divided into eight groups: control, no bleaching; IB and DB, immediate and delayed bonding after bleaching, respectively; S10m, S60m, S24h, S3d and S7d, bleaching + SA gel for 10 min, 60 min, 24 hr, 3 day and 7 day, respectively. For bleaching, a mixture of 30% hydrogen peroxide and sodium perborate was applied for 7 day. All access cavities were restored using One-Step adhesive (Bisco Inc.) and then Aelite LS Packable composite (Bisco Inc.). The bonded specimens were subjected to 500 thermal cycles, immersed in 1% methylene blue for 8 hr, and longitudinally sectioned. Microleakage was assessed with a 0 - 4 scoring system and analyzed using nonparametric statistical methods (alpha = 0.05). RESULTS: Group IB showed a significantly higher microleakge than the control group (p = 0.006) and group DB a statistically similar score to the control group (p > 0.999). Although groups S10m, S60m, and S24h exhibited significantly higher scores than group DB (p < 0.05), the microleakage in groups S3d and S7d was statistically similar to that in group DB (p = 0.771, p > 0.999). CONCLUSIONS: Application of SA gel for 3 day after nonvital bleaching was effective in reducing microleakage of composite restoration in intracoronally-bleached teeth.
Adhesives ; Ascorbic Acid ; Borates ; Composite Resins ; Humans ; Hydrogen Peroxide ; Incisor ; Methylene Blue ; Sodium ; Tooth