No abstract available.
Diagnosis* ; Epilepsy*

Clinical characteristics of papular-purpuric gloves and socks syndrome consist of a purpuric erythema affecting the hands and feet in a gloves and stocking distribution. It is sometimes associated with fever and oral lesions. The disease is self-limiting and resolves within 1 to 2 weeks. Serological studies have shown that there is an association with parvovirus B19 infection in most patients affected by this syndrome. We report a case of gloves and socks syndrome in a 21-year-old female. She had a 4-day history of papular-purpuric eruptions of the hands and feet in a gloves-and-socks distribution. She also complained of fever(up to 39C) during the first 2 or 3 days of clinical onset. The oral mucosa was normal and there were no palpable lymph nodes. Laboratory and histopathological findings were non-specific. However, human parvovirus B19 DNA was detected in the serum by a polymerase chain reaction. Systemic manifestations were transient and disappeared within a few days, whereas the skin lesions resolved gradually over a period of 2 weeks.
DNA ; Erythema ; Female ; Fever ; Foot ; Hand ; Humans ; Lymph Nodes ; Mouth Mucosa ; Parvovirus ; Parvovirus B19, Human ; Polymerase Chain Reaction ; Skin ; Young Adult

Purpose: This study aimed to analyze the profiles and mechanisms of injuries using online injury surveillance system (OISS) with match video files at 2017 World Taekowndo Championship (WTC) athletes. Methods: This study design was a prospective epidemiological study with video analysis. All injuries were recorded during the 2017 WTC using the OISS developed by the International Olympic Committee. A total of 971 athletes who participated in the 2017 WTC were enrolled. Each injury was recorded retrospectively by three cameras surrounding each court. Injury profiles and mechanisms were calculated as; percent injury rate, injury rate/100 athlete-exposures, injury location, type, and mechanism via the injury surveillance system and video analysis form. Results: There were 74 injuries, which corresponded to an overall incidence of 13.5 injuries (95% confidence interval, 11.2–15.8) per 100 athletes. The face (27.0%), hand/finger (23.0%), knee (14.9%), and ankle (10.8%) were most frequently injured parts. Contusions (37.8%), fracture and ligament sprains (20.3%) were the most frequently injury types. The main mechanism for contact injury is while attacking with the roundhouse kick (66.2%), or not used block (81.1%). There were also noncontact injuries (24.3%). Conclusion The incidence of injuries to the face, hand/fingers, knee, and ankle was relatively high. To prevent contact injuries, protective headgear and better shin guards and hand protectors need to be developed. As for the noncontact injuries, we recommend hamstring strengthening exercises, and neuromuscular training to strengthen the tendons and ligaments protecting the ankle and knee joints.

No abstract available.
Female ; Humans ; Prevalence* ; Urinary Bladder* ; Urinary Incontinence*

The effect of epidural morphine on the mean inspired concentration of isoflurane was inves- tigated in 34 patients undergoing hepatoma surgery, The patients were randomly assigned to the control(CTRL), epidural morphine(MORP) or epidural bupivacaine(BUPI) groups. Before induction of anesthesia, epidural catheter was inserted beween T6-10 intervertebral space in the right lateral decubitus position. MORP group(n=13) received morphine sulfate 4 mg in 4 ml normal saline and BUPI group(n=10) received 0.5% bupivacame 10 md through epidural eatheter. CTRL group(n=11) wss treated in an identical fashion except that, after placement of epidural catheter, nothing was injected. After endotracheal intubation, general anesthesia was maintained during surgery with oxygen-nitrous oxide(1:1 ratio) and isoflurane. Inspired concentration of isoflurane was adjusted to maintain blood pressure in the range of blood pressure at the ward during surgery. Mean inspired concentration of isoflurane was monitored from incision to last skin suture. Mean inspired concentration of isoflurane(+/-SD) of CTRL, MORP and BUPI group was 1.41+/-0.36, 1.52+/-0.39 and 0.37+/-0.16 vol%, respectively. There was no difference in mean inspired concentration of isoflurane between CTRL and MORP group. Under the condition of this study, epidural morphine did not reduce inspired concentration of isoflurane during surgery even though epidural morphine is effective for post operative pain control.
Analgesics ; Anesthesia, Epidural ; Anesthesia, General* ; Blood Pressure ; Carcinoma, Hepatocellular ; Catheters ; Humans* ; Intubation, Intratracheal ; Isoflurane* ; Morphine* ; Skin ; Sutures

The purpose of this study was to analyze the minimum two year clinical and radiological results of revision total hip arthroplasties using allogenic chip bone graft and cement in acetabular bone deficiencies. Thirty six revision total hip arthroplasties that had been performed in thirty four patients between Sep. 1992 and May. 1994 at Seoul Paik Hospital and had followed more than two years were included in this study. The clinical result was evaluated by Harris hip score. The mean Harris hip score was 48 points preoperatively, 88 points at final follow-up, a mean of 3 years after revision. In radiological evaluation, osseous union between grafted bone and host bone was seen within 4 months in thirty two hips (89%), a complete grafted bone-cement radiolucent line of two millimeter or more in at least one zone was seen in seven hips (19%) and acetabular component migration was seen in six hips (17%) at postoperative 3 year follow-up radiograph. At the time of follow-up, five hips (14%) had been revised a second time: three for aseptic acetabular loosening, two for infection. In conclusion, we recommend the technique using allogenic chip bone graft and cement to reconstruct the acetabular bone deficiencies in revision total hip arthroplasties, though other technique will be recommend in severe segmental acetabular deficiencies or previous infection.
Acetabulum* ; Arthroplasty ; Arthroplasty, Replacement, Hip* ; Follow-Up Studies ; Hip ; Humans ; Seoul ; Transplants*

This study aims to determine the effects of formaldehyde exposure on self-reported symptoms of respiratory-eye mucosa and integumentary system during anatomy practices among Korean medical students. Data were collected using the web-based survey. Study subjects in 1st and 2nd grade medical student, and having anatomy dissection in medical college and medical graduate school. A total of 463 students from the 14 medical college and medical graduate school participated in this study. The results show that 261 (56.4%) of the participants responded feeling discomfort above moderate at anatomy dissection. After anatomy dissection, 104 (43.2%) students responded aggravating the symptom allergic rhinitis, xerophthalmia and so on. 209 (95.0%) of them responded the new symptom's appearance. In the result of multiple logistic regression, women (OR: 2.000, 95% CI: 1.169~3.421) and the students with feeling discomfort (OR: 3.190, 95% CI: 1.807~5.632) were more likely to increase the risk of pre-existing respiratory · eye mucosal system symptom's aggravation than the counter parts. For pre-existing integumentary system symptom's aggravation, risk is significantly higher in elder age group (OR: 2.612, 95% CI: 1.187~5.750) and with disapproval protective equipments (OR: 2.217, 1.006~4.885). In case of new symptom's appearance, people with feeling discomfort above moderate (OR: 5.097, 95% CI: 1.075~24.160) in respiratory · eye mucosal system were more likely to increase the risk of new symptom's appearance. And for integumentary system, risk was higher in people with feeling discomfort (OR: 1.921, 95% CI: 1.218~3.031), in woman (OR: 1.711, 1.090~2.686) and without enough protective equipments preparation (OR: 1.953, 1.189~3.210). This study confirms the protective equipments for minimizing exposure from chemicals for cytological fixation (e,g formaldehyde) is not worn enough and students in anatomy dissection experience discomfort and disease after anatomy dissection. Therefore, this study indicates that the safe guideline in anatomy dissection should be enhanced and institutional strategy to protect student's right of health should be provided.
Female ; Formaldehyde* ; Humans ; Integumentary System* ; Logistic Models ; Mucous Membrane* ; Rhinitis, Allergic ; Students, Medical* ; Xerophthalmia

Background: Optimal estimated glomerular filtration rate (eGFR) to start maintenance dialysis is controversial. Observational studies have reported that initiation of dialysis at high eGFRs is associated with worse postdialysis survival. Methods: We retrospectively investigated 1,038 incident dialysis patients who started maintenance dialysis during 2010-2015. Patients were assessed for comorbidities and adverse events during the transitional period of dialysis initiation. Patients were classified as planned dialysis (PD) vs. unplanned dialysis (UD) according to indications for dialysis initiation. Results: UD group comprised 352 patients (33.9%). Mean eGFR at dialysis initiation was higher in UD patients than PD patients (7.9 ± 5.1 mL/min/1.73 m2 vs. 5.9 ± 3.4 mL/min/1.73 m2, p < 0.001). Mean Davies comorbidity index in the UD group was higher than in the PD group (1.3 ± 1.0 vs. 0.9 ± 1.0, p < 0.001). In multivariable Cox regression, patients with more comorbidities experienced more ischemic heart disease (hazard ratio [HR], 4.36; 95% confidence interval [CI], 1.71–11.14) in the medium-risk group and HR of 8.84 (95% CI, 3.06–25.55) in the high-risk group (vs. low-risk group, p < 0.001)) during the predialysis period. High-risk group had increased postdialysis mortality (HR, 2.48; 95% CI, 1.46–4.20; p = 0.001). Adjusted HR of mortality was higher in the medium-risk group of UD patients (HR, 1.72; 95% CI, 1.16–2.56; p = 0.007). Conclusion Patients with more comorbidities were at increased risk of predialysis ischemic heart disease and postdialysis mortality. UD patients in the medium-risk population had increased risk of postdialysis mortality. Dialysis start should be individualized by considering comorbidities.

This study was performed to evaluate the effects of microstructural change of zirconia surface on tensile bond strength with resin cement. The zirconia partially sintered block was cut into a size of 18 × 18 × 7 mm, and then the Zirface slurry (DMAX, Daegu, Korea) containing 15% and 30% zirconia was applied and followed by sintering at 1530 ℃ for 2 hours. Resin cement (PermaCem 2.0, DMG, Hamburg, Germany) was applied on zirconia specimen and polymerized to prepare an 18 × 18 × 14 mm block. In addition, for comparison of bond strength, specimens were prepared for the group that was polished and the group that was blasted at 3 atm using 110 µm alumina. Thereafter, all blocks were cut into a cross-sectional area of 1.0 × 1.0 mm to prepare 12 specimens. The specimens were immersed in distilled water at 37 ℃. for 10 days for aging treatment. A holder for tensile testing was attached to each of the specimens, and then a tensile force was applied at a crosshead speed of 0.5 mm/min to measure the fracture load. The fracture surfaces of each test piece was observed with a high-resolution field emission scanning electron microscope. Through the above tests, the following results were obtained. 1. On the blasted surface, zirconia grains were locally removed but on the Zirface treated surface, a porous microstructure was created on the zirconia surface. 2. Arithmetical mean deviation from the mean line ra was the highest in the blasted group and the lowest in the polished group, and as a result of Tukey analysis, there were statistically significant differences between all test groups (P<0.05). 3. The maximum tensile bond strength was 18.8±5.4 MPa in the Zirface 30% group, and as a result of Tukey analysis, there was a statistically significant difference from the other test groups (P<0.05). 4. As a result of observing the fracture surface after the tensile test with a high-resolution field emission scanning electron microscope, in the Zirface 30% group, cohesive fracture and interfacial fracture in the resin was observed, but the other test groups showed the interfacial fracture pattern. In conclusion, within the limits of this study, treating the zirconia surface with Zirface 30% to form a porous microstructure can contribute to the improvement of the bond strength between zirconia and resin cement.

This study was performed to evaluate the effects of microstructural change of zirconia surface on tensile bond strength with resin cement. The zirconia partially sintered block was cut into a size of 18 × 18 × 7 mm, and then the Zirface slurry (DMAX, Daegu, Korea) containing 15% and 30% zirconia was applied and followed by sintering at 1530 ℃ for 2 hours. Resin cement (PermaCem 2.0, DMG, Hamburg, Germany) was applied on zirconia specimen and polymerized to prepare an 18 × 18 × 14 mm block. In addition, for comparison of bond strength, specimens were prepared for the group that was polished and the group that was blasted at 3 atm using 110 µm alumina. Thereafter, all blocks were cut into a cross-sectional area of 1.0 × 1.0 mm to prepare 12 specimens. The specimens were immersed in distilled water at 37 ℃. for 10 days for aging treatment. A holder for tensile testing was attached to each of the specimens, and then a tensile force was applied at a crosshead speed of 0.5 mm/min to measure the fracture load. The fracture surfaces of each test piece was observed with a high-resolution field emission scanning electron microscope. Through the above tests, the following results were obtained. 1. On the blasted surface, zirconia grains were locally removed but on the Zirface treated surface, a porous microstructure was created on the zirconia surface. 2. Arithmetical mean deviation from the mean line ra was the highest in the blasted group and the lowest in the polished group, and as a result of Tukey analysis, there were statistically significant differences between all test groups (P<0.05). 3. The maximum tensile bond strength was 18.8±5.4 MPa in the Zirface 30% group, and as a result of Tukey analysis, there was a statistically significant difference from the other test groups (P<0.05). 4. As a result of observing the fracture surface after the tensile test with a high-resolution field emission scanning electron microscope, in the Zirface 30% group, cohesive fracture and interfacial fracture in the resin was observed, but the other test groups showed the interfacial fracture pattern. In conclusion, within the limits of this study, treating the zirconia surface with Zirface 30% to form a porous microstructure can contribute to the improvement of the bond strength between zirconia and resin cement.