1.Angiogenesis in newly regenerated bone by secretomes of human mesenchymal stem cells.
Wataru KATAGIRI ; Takamasa KAWAI ; Masashi OSUGI ; Yukiko SUGIMURA-WAKAYAMA ; Kohei SAKAGUCHI ; Taku KOJIMA ; Tadaharu KOBAYASHI
Maxillofacial Plastic and Reconstructive Surgery 2017;39(3):8-
BACKGROUND: For an effective bone graft for reconstruction of the maxillofacial region, an adequate vascular network will be required to supply blood, osteoprogenitor cells, and growth factors. We previously reported that the secretomes of bone marrow-derived mesenchymal stem cells (MSC-CM) contain numerous growth factors such as insulin-like growth factor (IGF)-1, transforming growth factor (TGF)-β1, and vascular endothelial growth factor (VEGF), which can affect the cellular characteristics and behavior of regenerating bone cells. We hypothesized that angiogenesis is an important step for bone regeneration, and VEGF is one of the crucial factors in MSC-CM that would enhance its osteogenic potential. In the present study, we focused on VEGF in MSC-CM and evaluated the angiogenic and osteogenic potentials of MSC-CM for bone regeneration. METHODS: Cytokines in MSC-CM were measured by enzyme-linked immunosorbent assay (ELISA). Human umbilical vein endothelial cells (HUVECs) were cultured with MSC-CM or MSC-CM with anti-VEGF antibody (MSC-CM + anti-VEGF) for neutralization, and tube formation was evaluated. For the evaluation of bone and blood vessel formation with micro-computed tomography (micro-CT) and for the histological and immunohistochemical analyses, a rat calvarial bone defect model was used. RESULTS: The concentrations of IGF-1, VEGF, and TGF-β1 in MSC-CM were 1515.6 ± 211.8 pg/mL, 465.8 ± 108.8 pg/mL, and 339.8 ± 14.4 pg/mL, respectively. Tube formation of HUVECs, bone formation, and blood vessel formation were increased in the MSC-CM group but decreased in the MSC-CM + anti-VEGF group. Histological findings suggested that new bone formation in the entire defect was observed in the MSC-CM group although it was decreased in the MSC-CM + anti-VEGF group. Immunohistochemistry indicated that angiogenesis and migration of endogenous stem cells were much more abundant in the MSC-CM group than in the MSC-CM + anti-VEGF group. CONCLUSIONS: VEGF is considered a crucial factor in MSC-CM, and MSC-CM is proposed to be an adequate therapeutic agent for bone regeneration with angiogenesis.
Animals
;
Blood Vessels
;
Bone Regeneration
;
Culture Media, Conditioned
;
Cytokines
;
Enzyme-Linked Immunosorbent Assay
;
Human Umbilical Vein Endothelial Cells
;
Humans*
;
Immunohistochemistry
;
Insulin-Like Growth Factor I
;
Intercellular Signaling Peptides and Proteins
;
Mesenchymal Stromal Cells*
;
Osteogenesis
;
Rats
;
Stem Cells
;
Transforming Growth Factors
;
Transplants
;
Vascular Endothelial Growth Factor A
2.A three‑dimensional investigation of mandibular deviation in patients with mandibular prognathism
Kazuaki OSAWA ; Jun NIHARA ; Hideyoshi NISHIYAMA ; Kojiro TAKAHASHI ; Ayako HONDA ; Chihiro ATARASHI ; Ritsuo TAKAGI ; Tadaharu KOBAYASHI ; Isao SAITO
Maxillofacial Plastic and Reconstructive Surgery 2023;45(1):4-
Background:
Craniofacial disharmony in cases of jaw deformity associated with abnormal lateral deviation of the jaw mostly involves both the maxilla and mandible. However, it has been still difficult to capture the jaw deviation aspect in a 3-dimensional and quantitative techniques. In this study, we focused on 3-dimensional mandibular morphology and position of the condylar head in relation to the base of the skull in patients with mandibular prognathism, one of the most common jaw deformities. We used cluster analysis to quantify and classify deviation and clarified its characteristics. We also investigated the degree of correlation between those findings and menton (Me) deviation measured on frontal cephalograms, which is a conventional indicator of jaw deformity.
Results:
Findings obtained from 100 patients (35 men, 65 women) were classified into the following three groups based on mandibular morphology and condylar position relative to the skull base. Then, reclassification using these parameters enabled classification of cluster analysis findings into seven groups based on abnormal jaw deviation characteristics. Comparison among these seven groups showed that the classification criteria were ramus height, mandibular body length, distance from the gonion to the apex of the coronoid process, and the lateral and vertical positions of the mandible. Weak correlation was also found between Me deviation on frontal cephalograms and each of the above parameters measured on 3D images.
Conclusions
Focusing on mandibular morphology and condylar position relative to the skull base in patients with mandibular prognathism, we used cluster analysis to quantify and classify jaw deviation. The present results showed that the 3D characteristics of the mandible based on mandibular morphology and condylar position relative to the skull base can be classified into seven groups. Further, we clarified that Me deviation on frontal cephalograms, which has been used to date, is inadequate for capturing jaw deviation characteristics.
3.Masticatory muscle tendon‑aponeurosis hyperplasia that was initially misdiagnosed for polymyositis: a case report and review of the literature
Wataru KATAGIRI ; Daisuke SAITO ; Satoshi MARUYAMA ; Makiko IKE ; Hideyoshi NISIYAMA ; Takafumi HAYASHI ; Jun‑ichi TANUMA ; Tadaharu KOBAYASHI
Maxillofacial Plastic and Reconstructive Surgery 2023;45(1):18-
Background:
Masticatory muscle tendon-aponeurosis hyperplasia (MMTAH) is a relatively newly identified clinical condition that manifests as trismus with a square-shaped mandible. Herein, we report a case of MMATH that was initially misdiagnosed for polymyositis due to trismus and simultaneous lower limb pain, with literature review.Case presentation A 30-year-old woman had a history of lower limb pain after exertion for 2 years. Initial physical examination had been performed at the Department of General Medicine in our hospital. There was also redness in the hands and fingers. Although polymyositis was suspected, it was denied. The patient visited our department for right maxillary wisdom tooth extraction.Clinical examination revealed that the patient had a square-shaped mandible. The maximal mouth opening was 22 mm. There was no temporomandibular joint pain at the time of opening. Furthermore, there was awareness of clenching while working. Panoramic radiography revealed developed square mandibular angles with flattened con‑ dyles. Computed tomography showed enlarged masseter muscles with high-density areas around the anterior and lateral fascia. Magnetic resonance imaging also showed thickened tendons and aponeuroses on the anterior surface and inside bilateral masseter muscles. Finally, the patient was diagnosed with MMTAH. Bilateral aponeurectomy of the masseter muscles with coronoidectomy and masseter muscle myotomy was performed under general anesthesia.The maximum opening during surgery was 48 mm. Mouth opening training was started on day 3 after surgery. Histo‑ pathological examination of the surgical specimen showed that the muscle fibers were enlarged to 60 μm. Immuno‑ histochemistry testing for calcineurin, which was associated with muscle hypertrophy due to overload in some case reports, showed positive results. Twelve months after surgery, the mouth self-opening and forced opening were over 35 mm and 44 mm, respectively.
Conclusions
Herein, we report a case of MMATH. Lower limb pain due to prolonged standing at work and overload due to clenching were considered risk factors for symptoms onset of MMATH.
4.A simple technique for repositioning of the mandible by a surgical guide prepared using a three-dimensional model after segmental mandibulectomy.
Akinori FUNAYAMA ; Taku KOJIMA ; Michiko YOSHIZAWA ; Toshihiko MIKAMI ; Shohei KANEMARU ; Kanae NIIMI ; Yohei ODA ; Yusuke KATO ; Tadaharu KOBAYASHI
Maxillofacial Plastic and Reconstructive Surgery 2017;39(6):16-
BACKGROUND: Mandibular reconstruction is performed after segmental mandibulectomy, and precise repositioning of the condylar head in the temporomandibular fossa is essential for maintaining preoperative occlusion. METHODS: In cases without involvement of soft tissue around the mandibular bone, the autopolymer resin in a soft state is pressed against the lower border of the mandible and buccal and lingual sides of the 3D model on the excised side. After hardening, it is shaved with a carbide bar to make the proximal and distal parts parallel to the resected surface in order to determine the direction of mandibular resection. On the other hand, in cases that require resection of soft tissue around the mandible such as cases of a malignant tumor, right and left mandibular rami of the 3D model are connected with the autopolymer resin to keep the preoperative position between proximal and distal segments before surgical simulation. The device is made to fit the lower border of the anterior mandible and the posterior border of the mandibular ramus. The device has a U-shaped handle so that adaptation of the device will not interfere with the soft tissue to be removed and has holes to be fixed on the mandible with screws. RESULTS: We successfully performed the planned accurate segmental mandibulectomy and the precise repositioning of the condylar head by the device. CONCLUSIONS: The present technique and device that we developed proved to be simple and useful for restoring the preoperative condylar head positioning in the temporomandibular fossa and the precise resection of the mandible.
Hand
;
Head
;
Mandible*
;
Mandibular Osteotomy*
;
Mandibular Reconstruction
5.Vertical distraction osteogenesis of a reconstructed mandible with a free vascularized fibula flap: a report of two cases
Naoaki SAITO ; Akinori FUNAYAMA ; Yoshiaki ARAI ; Daisuke SUDA ; Yoshiyuki TAKATA ; Tadaharu KOBAYASHI
Maxillofacial Plastic and Reconstructive Surgery 2018;40(1):32-
BACKGROUND: The free vascularized fibula flap presents many advantages such as sufficient length of the bony segment, good vascularization, better quality of the bone, and a long vascular pedicle, but it is also associated with some disadvantages with regard to prosthetic rehabilitation because of its limited height. Improvement in bone height is necessary for ideal dental implant treatment of reconstructed mandibles. CASE PRESENTATION: For two squamous cell carcinoma patients, mandibular bone reconstruction was performed secondarily with the peroneal flap after tumor resection. Since the bone height was insufficient at the time of implant treatment, occlusion reconstruction by dental implant was performed after vertical distraction osteogenesis. CONCLUSIONS: Vertical distraction osteogenesis is a suitable treatment option for alveolar ridge deficiency resulting from fibula transplantation for mandibular reconstruction following tumor surgery.
Alveolar Process
;
Carcinoma, Squamous Cell
;
Dental Implants
;
Fibula
;
Humans
;
Mandible
;
Mandibular Reconstruction
;
Osteogenesis, Distraction
;
Rehabilitation