The objective of the study was to observe and document the variation on the subject of branches of the median nerve. This report will assist clinicians and surgeons by considering anatomical variation associated with the median nerve in interpreting atypical clinical presentations. The arm and forearm region of a 55 year embalmed male cadaver during educational gross anatomy dissection. We found that an anomalous cutaneous branch arising from the median nerve in the right arm which was passing deep to the tendon of the biceps brachii. Later it enters the cubital fossa and then it is accompanied by the superficial vein of the forearm. The other limb of the cadaver did not show any such variation. No other neural, arterial or muscular variation was observed in either of the limbs. A rare anatomical variation in which the anomalous cutaneous branch arising from the median nerve in the right arm which is later accompanied by a superficial vein in the forearm. Such knowledge is advantageous in nerve grafting and neurophysiological evaluation for diagnosing peripheral neuropathies.
Arm* ; Cadaver ; Extremities ; Forearm ; Humans ; Male ; Median Nerve* ; Peripheral Nervous System Diseases ; Tendons ; Transplants ; Veins

The objective of the study was to observe and document the variation on the subject of branches of the median nerve. This report will assist clinicians and surgeons by considering anatomical variation associated with the median nerve in interpreting atypical clinical presentations. The arm and forearm region of a 55 year embalmed male cadaver during educational gross anatomy dissection. We found that an anomalous cutaneous branch arising from the median nerve in the right arm which was passing deep to the tendon of the biceps brachii. Later it enters the cubital fossa and then it is accompanied by the superficial vein of the forearm. The other limb of the cadaver did not show any such variation. No other neural, arterial or muscular variation was observed in either of the limbs. A rare anatomical variation in which the anomalous cutaneous branch arising from the median nerve in the right arm which is later accompanied by a superficial vein in the forearm. Such knowledge is advantageous in nerve grafting and neurophysiological evaluation for diagnosing peripheral neuropathies.
Arm* ; Cadaver ; Extremities ; Forearm ; Humans ; Male ; Median Nerve* ; Peripheral Nervous System Diseases ; Tendons ; Transplants ; Veins

STUDY DESIGN: Researchers created a proper type II dens fracture (DF) and quantified a novel current posterior fixation technique with spacers at C1–C2. A clinical case study supplements this biomechanical analysis. PURPOSE: Researchers explored their hypothesis that spacers combined with posterior instrumentation (PI) reduce range of motion significantly, possibly leading to better fusion outcomes. OVERVIEW OF LITERATURE: Literature shows that the atlantoaxial joint is unique in allowing segmental rotary motion, enabling head turning. With no intervertebral discs at these joints, multiple ligaments bind the axis to the skull base and to the atlas; an intact odontoid (dens) enhances stability. The most common traumatic injury at these strong ligaments is a type II odontoid fracture. METHODS: Each of seven specimens (C0–C3) was tested on a custom-built six-degrees-of-freedom spine simulator with constructs of intact state, type II DF, C1–C2 PI, PI with joint capsulotomy (PIJC), PI with spacers (PIS) at C1–C2, and spacers alone (SA). A bending moment of 2.0 Nm (1.5°/sec) was applied in flexion-extension (FE), lateral bending (LB), and axial rotation (AR). One-way analysis of variance with repeated measures was performed. RESULTS: DF increased motion to 320%, 429%, and 120% versus intact (FE, LB, and AR, respectively). PI significantly reduced motion to 41%, 21%, and 8%. PIJC showed negligible changes from PI. PIS reduced motion to 16%, 14%, and 3%. SA decreased motion to 64%, 24%, and 54%. Reduced motion facilitated solid fusion in an 89-year-old female patient within 1 year. CONCLUSIONS: Type II odontoid fractures can lead to acute or chronic instability. Current fixation techniques use C1–C2 PI or an anterior dens screw. Addition of spacers alongside PI led to increased biomechanical rigidity over intact motion and may offer an alternative to established surgical fixation techniques.
Aged, 80 and over ; Atlanto-Axial Joint ; Female ; Head ; Humans ; Intervertebral Disc ; Joints ; Ligaments ; Range of Motion, Articular ; Skull Base ; Spine

BACKGROUND: Instrumented posterior cervical spine surgery (IPCSS) can be conducted using screws inserted through the pedicles of the vertebra. A safe IPCSS method uses 3D-printing to produce templates that will serve as drill guides for screw placement. OBJECTIVES: This study describes the generation of 3D-printed drill guides using low-cost general purpose 3D modeling software and the comparison of screw insertion accuracy scores against the traditional landmark method and guides created using commercial grade software. METHODS: Twenty-five (25) subaxial pedicles of five cadaveric spines were selected and scanned using computed tomography (CT). A digital reconstruction of the five cadaveric spines were created based on the CT DICOM data. A low-cost 3D modeling software, Rhinoceros 3D, was utilized for trajectory planning and generation of a patientspecific drill template using the digital reconstruction. The templates were then fabricated in ABS plastic using a fused deposition modeling (FDM) 3D printer. Insertion of cervical pedicle screws on the cadaveric spines was done by an orthopedic resident using the 3D printed guides. Postoperative CT scans were obtained, and placement accuracy of the screws were scored by two assessors utilizing a four-point rating system. Screws in correct placement were scored Grade 0 while misplaced screws with neurovascular damage were given a score of Grade 3. RESULTS: Accuracy scores for the 3D-printed drill guides were 52% for assessor 1 and 44% for assessor 2. For assessor 1, screw placement in C3, C6, and C7 received the highest scores. For assessor 2, the highest scores were achieved in C3 and C7. The hybrid method of Bundoc et al. achieved scores of 94% while 3D printed guides utilizing commercial software like Materialise Mimics, Geomagic Freeform, or UG Imageware achieved scores of 80-100%. The traditional landmark method had scores ranging from 12% to 94% depending on the skill of the surgeon. CONCLUSION Commercial medical 3D image-based engineering software has high acquisition costs that might be beyond the reach of most institutions. A sub-$1000 general purpose 3D modeling software can be used to create drill templates. Several factors were identified in the design and fabrication of the template that can be addressed to increase accuracy. Trajectory planning can also be improved by automating the process. The researchers recommend further studies in these areas specially in the context of developing 3D printing as a support service for surgical operations in the Philippines.

Objective: To quantify the extent of hyperlipidemia and its treatment in patients with stable coronary heart disease (CHD) or an acute coronary syndrome (ACS) in the Philippines. Methods: The Dyslipidemia International Study (DYSIS) II was an observational, multinational study conducted in patients aged ≥18 years with stable CHD or being hospitalized with an ACS. A full lipid profile was evaluated at baseline, and for the ACS cohort, at 4 months after discharge from hospital. Achievement of low-density lipoprotein cholesterol (LDL-C) targets and the use of lipid-lowering therapy (LLT) were assessed. Results: A total of 232 patients were enrolled from 10 centers in the Philippines, 184 with stable CHD and 48 being hospitalized with an ACS. The mean LDL-C level for the CHD patients was 88.0±40.1 mg/dL, with 33.3% achieving the target of <70 mg/dL recommended for very high-risk patients. For the ACS cohort, the mean LDL-C level was 109.0±48.5 mg/dL, with target attainment of 25.0%. The majority of the CHD cohort was being treated with LLT (97.3%), while 55.3% of the ACS patients were receiving LLT prior to hospitalization, rising to 100.0% at follow-up. There was little use of non-statins. Conclusions For these very high-risk patients from the Philippines, LDL-C target attainment was poor. Opportunities for better monitoring and treatment of these subjects are being missed.
Cholesterol ; Hydroxymethylglutaryl-CoA Reductase Inhibitors ; Coronary Disease ; Acute Coronary Syndrome ; Myocardial Infarction

Objective: This study aimed to determine the antimicrobial property of oregano (Plectranthus amboinicus) crude leaf extract against pathogens that infect the throat, specifically Streptococcus pyogenes and Candida albicans using the broth and checkerboard dilution methods.

Methods: This study employed an experimental study design using broth dilution method for the determination of the minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) against Streptococcus pyogenes ATCC 19615, and minimum fungicidal concentration (MFC) against Candida albicans ATCC 14053 of P. amboinicus crude extract (PA extract). Checkerboard dilution method was then used for determination of the synergy between PA extract and the standard antimicrobials.

Results: In vitro growth inhibition of S. pyogenes (MIC 0.13 g/mL) and C. albicans (MIC 0.03 g/mL) was exhibited by the PA extract. The highest concentration of PA extract used in this study was not sufficient to demonstrate bactericidal and fungicidal activity (MBC >0.25 g/mL, MFC >0.25 g/mL). Results of checkerboard dilution method revealed that PA extract when combined with either penicillin (for S. pyogenes) or nystatin (for C. albicans) demonstrated indifference.

Conclusion: The crude extract of Plectranthus amboinicus has the capability to inhibit the growth of both S. pyogenes and C. albicans. This demonstrates its potential use in the treatment of throat infections caused by these organisms.

Key Words: Plectranthus amboinicus, oregano, antimicrobial, throat infections, herbal medicine