No abstract available.
Animals ; Nerve Regeneration* ; Rats* ; Sciatic Nerve* ; Transplants*

This study was undertaken to evaluate the status of human paragonimiasis in Kang Hwa Gun, Kyunggi Do, Korea from March 1973 to October 1975 by the use of intradermal screening test with Veronal buffered saline antigen. A total number of 7,352 (male 3,936; female 3,4l6) consisting of 3,447 primary school children, 2,689 middle school students, l,008 high school students of 9 Myuns out of 13 Myuns of this County and 208 residents of all age group in Kilgeong-Ri, Yangdo Myun were examined by the intradermal test with Paragonimus antigen. In order to detect Paragonimus egg, the sputum and the stool examinations were undertaken on the residents in Kilgeong-Ri. The infestation rate of crayfish with Paragonimus metacercaria was also examined in Konneung and Jeongha village in Kilgeong-Ri. The following results were obtained in this survey: As a whole, 16.6 per cent of the examiners showed positive reaction with sexual difference of 16.1% in male and 14.8 per cent in female. In age groups, the highest positive rate showed in middle school age group (17.1 per cent) than primary school (14.0 per cent) and high school age group (11.4 per cent). In regional differences of positive rates, the highest rate (28.4 per cent) showed at Yangdo Myun followed by Kilsang Myun (27.0 per cent), Hwado Myun (25.0 per cent), and Naega Myun(20.8 per cent). In the result of 208 residents Kilgeong-Ri, the positive of 36.1 per cent in male and 20.2 per cent in female. The highest positive rate showed in 10 to 19 age group (41.5 per cent). Among the residents in Kilgeong-Ri, Paragonimus eggs were detected in 11 residents by the sputum and the stool examinations. The infestation rate of crayfsh with Paragonimus metacercariae was 100 per cent (41 out of 41 crayfishes) in Konneung village, and 84.6 per cent (9 out of 13 crayfishes) in Jeongha village, Kilgeong-Ri The fluctuation of the infection rate of crayfish with Paragonimus metacercariae was decreased in Konneung village in 2 years after the treatment with Bilevon against 10 paragonimiasis patients.
parasitology-helminth-trematoda ; epidemiology-paragonimiasis ; Paragonimus westermani ; crayfish-Cambaroides similis

Purpose: To assess the clinical outcomes of scleral buckling (SB) without subretinal fluid drainage (SRFD) on primary rhegmatogenous retinal detachment (RRD). Methods: The medical records of patients with RRD treated via SB without SRFD from March 2009 to Feb 2018 were retrospectively reviewed. Cases with histories of previous intraocular surgery (except cataract removal) were excluded. The primary and final surgical success rates were the main outcome measures. Pre- and post-operative visual acuity and intraocular pressure (IOP), factors that might affect the surgical success rate, secondary operative procedures, re-operation rates, and complications were analyzed. Results: A total of 66 eyes of 66 patients were included. The mean patient age was 38.9 ± 18.6 years and the mean symptom duration 19.23 ± 25.14 days. The retinae were reattached after single surgeries on 57 eyes (success rate 86.36%); the final success rate was 100% after a second operation (when necessary). Of the nine eyes requiring additional surgery, seven required vitrectomy and two vitrectomy combined with buckle revision. The mean preoperative logMAR visual acuity of 0.578 ± 0.647 improved to 0.518 ± 0.512 at 1 month after surgery (p < 0.001) and to 0.262 ± 0.372 at the last follow-up visit (p < 0.001). The postoperative IOP was higher than the preoperative IOP at 3 months (p = 0.024). Conclusions Scleral buckling without SRFD used to treat primary RRD afforded a high reattachment rate (compared to those of previous reports employing vitrectomy or scleral buckling with SRFD). Given the possible complications of SRFD, our method may be a safe and feasible surgical option, affording good results with few complications in patients with primary RRD.

Purpose: To assess the clinical outcomes of scleral buckling (SB) without subretinal fluid drainage (SRFD) on primary rhegmatogenous retinal detachment (RRD). Methods: The medical records of patients with RRD treated via SB without SRFD from March 2009 to Feb 2018 were retrospectively reviewed. Cases with histories of previous intraocular surgery (except cataract removal) were excluded. The primary and final surgical success rates were the main outcome measures. Pre- and post-operative visual acuity and intraocular pressure (IOP), factors that might affect the surgical success rate, secondary operative procedures, re-operation rates, and complications were analyzed. Results: A total of 66 eyes of 66 patients were included. The mean patient age was 38.9 ± 18.6 years and the mean symptom duration 19.23 ± 25.14 days. The retinae were reattached after single surgeries on 57 eyes (success rate 86.36%); the final success rate was 100% after a second operation (when necessary). Of the nine eyes requiring additional surgery, seven required vitrectomy and two vitrectomy combined with buckle revision. The mean preoperative logMAR visual acuity of 0.578 ± 0.647 improved to 0.518 ± 0.512 at 1 month after surgery (p < 0.001) and to 0.262 ± 0.372 at the last follow-up visit (p < 0.001). The postoperative IOP was higher than the preoperative IOP at 3 months (p = 0.024). Conclusions Scleral buckling without SRFD used to treat primary RRD afforded a high reattachment rate (compared to those of previous reports employing vitrectomy or scleral buckling with SRFD). Given the possible complications of SRFD, our method may be a safe and feasible surgical option, affording good results with few complications in patients with primary RRD.

No abstract available.
Hyperthyroidism* ; Muscular Diseases*

STATEMENT OF PROBLEM: Macroscopic and especially microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. Dental implants with modified surfaces have shown stronger osseointegration than implants which are only turned (machined). Advanced surface modification techniques such as anodic oxidation and Ca-P application have been developed to achieve faster and stronger bonding between the host bone and the implant. PURPOSE: The purpose of this study was to investigate the effect of surface treatment of titanium dental implant on implant stability after insertion using the rabbit tibia model. MATERIAL AND METHODS: Three test groups were prepared: sandblasted, large-grit and acid-etched (SLA) implants, anodic oxidized implants, and anodized implants with Ca-P immersion. The turned implants served as control. Twenty rabbits received 80 implants in the tibia. Resonance frequencies were measured at the time of implant insertion, 2 weeks and 4 weeks of healing. Removal torque values (RTV) were measured 2 and 4 weeks after insertion. RESULTS: The implant stability quotient (ISQ) values of implants for resonance frequency analysis (RFA) increased significantly (P < .05) during 2 weeks of healing period although there were no significant differences among the test and control groups (P > .05). The test and control implants also showed significantly higher ISQ values during 4 weeks of healing period (P < .05). No significant differences, however, were found among all the groups. All the groups showed no significant differences in ISQ values between 2 and 4 weeks after implant insertion (P > .05). The SLA, anodized and Ca-P immersed implants showed higher RTVs at 2 and 4 weeks of healing than the machined one (P < .05). However, there was no significant difference among the experimental groups. CONCLUSION: The surface-modified implants appear to provide superior implant stability to the turned one. Under the limitation of this study, however, we suggest that neither anodic oxidation nor Ca-P immersion techniques have any advantage over the conventional SLA technique with respect to implant stability.
Dental Implants ; Imidazoles ; Immersion ; Nitro Compounds ; Osseointegration ; Rabbits ; Tibia ; Titanium ; Torque

Retinoid, Ro l0-9359 is an aromatic analog of vitamin A acid or retinoic acid. The orally administrable retinoid has a therapeutic effect on the treatment of psoriasis, ichthyosis, Darier's disease, pustulosis palmoplantaris and skin cancer. However, some results have been reported previously, indicating that oral retinoid alone does not clear psoriatic lesions although some improvement may he noted. Morcover, promising results of combination treatment of psoriasis with the retinoid and local dithranol or PUVA have been reported. In the present study we report the clinical results obtained in 16 psoriatics after oral retinoid treatment, with and without the addition of topical cotricosteroid. We employed a new retinoid regimen orally in 16 adults with widcspread psoriatic lesions, Most of them bad been treated earlier with topical corticosteroids without beneficial effect. Of 16 cases 8 were treated with retinoid alone and the other 8 patients with topical corticosteroids in addition to the oral regimen, The results are summarized as follows: 1. Complete to good clearing of the lesions was seen in 5 of 8 patient with retinoid alone and in 7 of 8 patients using the combination treatment. 2. Side-effects appeared in all patients, the most prominent being dryness of the mouth or cheilitis in cases and pruritus in 10 cases. However, there were no abnormalities shown in liver function tests during or after treatment. From the above results the combination treatment with topical corticosteroids seems to be more effective than retinoid alone in the treatment of psoriasis. It is considered that the oral retinoid could be an alternative on the treatment of psoriasis.
Adrenal Cortex Hormones ; Adult ; Anthralin ; Cheilitis ; Darier Disease ; Humans ; Ichthyosis ; Liver Function Tests ; Mouth ; Pruritus ; Psoriasis* ; Skin Neoplasms ; Tretinoin

STATEMENT OF PROBLEM: Recently Yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) has been introduced due to superior flexural strength and fracture toughness compared to other dental ceramic systems. Although zirconia has outstanding mechanical properties, the phenomenon of decrease in the life-time of zirconia resulted from degradation in flexural strength after low temperature aging has been reported. PURPOSE: The objective of this study was to investigate degradation of flexural strength of Y-TZP ceramics after various low temperature aging treatments and to evaluate the phase stability and micro-structural change after aging by using X-ray diffraction analysis and a scanning electron microscope (SEM). MATERIAL AND METHODS: Y-TZP blocks of Vita In-Ceram YZ (Vita Zahnfabrik, Bad Sackingen, Germany) were prepared in 40 mm (length) x 4 mm (width) x 3 mm (height) samples. Specimens were artificially aged in distilled water by heat-treatment at a temperature of 75, 100, 125, 150, 175, 200, and 225degrees C for 10 hours, in order to induce the phase transformation at the surface. To measure the mechanical property, the specimens were subjected to a four-point bending test using a universal testing machine (Instron model 3365; Instron, Canton, Mass, USA). In addition, X-ray diffraction analysis (DMAX 2500; Rigaku, Tokyo, Japan) and SEM (Hitachi s4700; Jeol Ltd, Tokyo, Japan) were performed to estimate the phase transformation. The statistical analysis was done using SAS 9.1.3 (SAS institute, USA). The flexural strength data of the experimental groups were analyzed by one-way analysis of variance and to detect statistically significant differences (alpha= .05). RESULTS: The mean flexural strength of sintered Vita In-Ceram YZ without autoclaving was 798 MPa. When applied aging temperature at below 125degrees C for 10 hours, the flexural strength of Vita In-Ceram YZ increased up to 1,161 MPa. However, at above 150degrees C, the flexural strength started to decrease. Although low temperature aging caused the tetragonal-to-monoclinic phase transformation related to temperature, the minimum flexural strength was above 700 MPa. CONCLUSION: The monoclinic phase started to appear after aging treatment above 100degrees C. With the higher aging temperature, the fraction of monoclinic phase increased. The ratio of monoclinic/tetragonal + monoclinic phase reached a plateau value, circa 75% above 175degrees C. The point of monoclinic concentration at which the flexural strength begins to decrease was between 12% and 54%.
Aged ; Aging ; Aluminum Oxide ; Ceramics ; Collodion ; Dental Porcelain ; Electrons ; Humans ; Phenothiazines ; Tokyo ; Water ; X-Ray Diffraction ; Yttrium ; Zirconium

PURPOSE: The purpose of this study was to investigate the diametral tensile strength of polymer-based temporary crown and fixed partial denture (FPD) materials, and the change of the diametral tensile strength with time. MATERIAL AND METHODS: One monomethacrylate-based temporary crown and FPD material (Trim) and three dimethacrylate-based ones (Protemp 3 Garant, Temphase, Luxtemp) were investigated. 20 specimens (the empty set 4 mm x 6 mm) were fabricated and randomly divided into two groups (Group I: Immediately, Group II: 1 hour) according to the measurement time after completion of mixing. Universal Testing Machine was used to load the specimens at a cross-head speed of 0.5 mm/min. The data were analyzed using one-way ANOVA, the multiple comparison Scheffe test and independent sample t test (alpha = 0.05). RESULTS: Trim showed severe permanent deformation without an obvious fracture during loading at both times. There were statistically significant differences among the dimethacrylate-based materials. The dimethacrylate-based materials presented an increase in strength from 5 minutes to 1 hour and were as follows: Protemp 3 Garant (23.16 - 37.6 MPa), Temphase (22.27 - 28.08 MPa), Luxatemp (14.46 - 20.59 MPa). Protemp 3 Garant showed the highest value. CONCLUSION: The dimethacrylate-based temporary materials tested were stronger in diametral tensile strength than the monomethacrylate-based one. The diametral tensile strength of the materials investigated increased with time.
Acrylic Resins ; Bisphenol A-Glycidyl Methacrylate ; Collodion ; Composite Resins ; Crowns ; Denture, Partial, Fixed ; Methacrylates ; Polymethacrylic Acids ; Tensile Strength

PURPOSE: The objective of this study was to evaluate fracture strength of collarless metal-ceramic FPDs according to their metal coping designs. MATERIALS AND METHODS: Four different facial margin design groups were investigated. Group A was a coping with a thin facial metal collar, group B was a collarless coping with its facial metal to the shoulder, group C was a collarless coping with its facial metal 1 mm short of the shoulder, and group D was a collarless coping with its facial metal 2 mm short of the shoulder. Fifteen 3-unit collarless metal-ceramic FPDs were fabricated in each group. Finished FPDs were cemented to PBT (Polybutylene terephthalate) dies with resin cement. The fracture strength test was carried out using universal testing machine (Instron 4465, Instron Co., Norwood MA, USA) at a cross head speed of 0.5 mm/min. Aluminum foil folded to about 1 mm of thickness was inserted between the plunger tip and the incisal edge of the pontic. Vertical load was applied until catastrophic porcelain fracture occurred. RESULTS: The greater the bulk of unsupported facial shoulder porcelain was, the lower the fracture strength became. However, there were no significant differences between experimental groups (P > .05). CONCLUSION: All groups of collarless metal-ceramic FPDs had higher fracture strength than maximum incisive biting force. Modified collarless metal-ceramic FPD can be an alternative to all-ceramic FPDs in clinical situations.
Aluminum ; Bites and Stings ; Collodion ; Dental Porcelain ; Denture, Partial, Fixed ; Head ; Resin Cements ; Shoulder