PURPOSE: To evaluate the clinical results of the treatment of the percutaneous Kirschner wire fixation of bony mallet finger using an 18 gauge needle. MATERIALS AND METHODS: From September 2002 to September 2009, we performed closed reduction using an 18 gauge needle and percutaneous fixation with Kirschner wire for 15 cases of bony mallet finger and followed up at least 1 year. The fractures were classified by the Wehbe and Schneider's method. Indications of operative treatment were fractures involving more than 30% of articular surface, fracture fragments displaced more than 3 mm, or subluxation of the distal interphalangeal joint. The results were evaluated by the Crawford criteria. RESULTS: All the fractures united, with an average healing time of 5.3 weeks(4-6 weeks). According to Crawford criteria, 10 cases were excellent, 5 cases were fair at a mean follow-up of 13 months. There were no pin tract infections and migrations of the pin. CONCLUSION: Percutaneous Kirschner wire fixation of mallet finger using an 18 gauge needle is an easy technique which can achieve anatomical reduction and diminish operation-related complications.
Fingers ; Follow-Up Studies ; Joints ; Needles

No abstract available.
Cholestasis, Intrahepatic*

No abstract available.
Abscess* ; Bacteria, Aerobic* ; Quinolones* ; Virulence*

The purpose of this study was to evaluate the effect of wattage and curing time on surface hardness, three-point bending strength and internal porosity of microwave curing denture base resin. Two sizes of resin spicimens were made of Acron MC ; 3.5x10x60mm for surface hardness and three-point bending strength measurement and 5x12x60mm for internal porosity measurement. They were cured by microwave energy at varing wattages(500W, 700W) and curing times(2min., 3min., 4min.) to determine if a certain wattage/curing time combination would improve physical properties. Surface hardness was measured with Vikers hardness tester, three-point bend-ing strength with universal testing machine and internal porosity was calculated by measuring the weight in air and in water. The results obtained were as follows : 1. There was no significant difference in percent porosity among experimental groups(p>0.05). 2. 500W/3min, group showed the higher surface hardness than 700W/2, 3, 4min. groups(p<0.05), and 700W/4 min. group showed the lower surface hardness than 500W/2, 3, 4min. groups(p<0.05), but there was no significant difference among others(p>0.05). 3. 500W/3min. group yielded the higher value of bending strength than 500W/2min., 700W/3, 4min. groups(p<0.05), but there was no significant difference among others(p>0.05).
Denture Bases* ; Dentures* ; Hardness ; Hardness Tests ; Microwaves* ; Polymethyl Methacrylate ; Porosity ; Water

The purpose of this study was to investigate setting and thermal expansion of dental soldering investments. In order to compare expansion rates and to investigate the effect of water/powder ratio on expansion, setting and thermal expansion of four dental soldering investments were measured under three different water/powder ratio conditions: standard, 20% decreased and 20% increased. Setting expansion of investments was measured by use of dialgauge method. Each measurement was started two minutes later from the beginning of spatulation and recorded every one minute for one hour. Thermal expansion of cylindrical test specimens, 10mm diameter, 50mm length, was recorded in a Thermodilatometer at heating rate of 10degrees C per minute from 25degrees C to 700degrees C. The results of this study were obtained as follows: 1. Setting expansion rates under the standard water/power ratio condition were 0.198% in Speed-E, 0.090% in Deguvest, 0.080% in CM and Hi-temp. Setting expansion of Speed-E was significantly different from those of CM, Deguvest and Hi-temp, and setting expansion of Deguvest was significantly different from those of CM and Hi-temp(p<.05). 2. Under the decreased water/powder ratio condition, there was significant increase in setting expansion of 4 dental soldering investments(p<.05). 3. There were no significant differences in setting expansions of investments except Hi-temp between standard and increased water/powder ratio condition(p<.05). 4. Thermal expansion rates under the standard water/powder ratio condition were 1.923% in Deguvest, 1.629% in Speed-E, 1.619% in Hi-temp and 1.580% in CM. No significant difference in thermal expansions under the standard water/powder ratio condition existed only between Speed-E and Hi-temp(p<.05). 5. Under the decreased water/powder ratio condition, there was significant increase in thermal expansion of CM and Deguvest but decrease in thermal expansion of Speed-E(p<.05). 6. Under the increased water/powder ratio condition, there was significant decrease in thermal expansion of CM, Deguvest and Speed-E but decrease in thermal expansion of Hi-temp(p<.05).
Dental Soldering* ; Heating ; Hot Temperature ; Investments*

For many years chemonucleolysis has been proven effective in the curative treatment of lumbar disc herniation. However, this technique is seldom popular in the herniated cervical disc. For several years microsurgery of the cervical disc has been effective in the treatment of refractory cervicobrachial neuralgia. To compete with this method which has been familiar to neurosurgeons, cervical nucleolysis using chymopapain for 1 year. Twenty two pateints(75%) had excellent outcomes, 5 pateints(15%) considered good while 3 sustained their symptom, but showed decreased intensity. The decision to intervene is made when the radiculagia is recurrent or resistant to medical treatment of several weeks duration, without myelopathy or bony abnormalities such as spondylosis or canal stenosis. The principal advantages of this method are : short stay in the hospital(3 days to 5 days on average), absence of general anesthesia, prompt resumption of previous activities, and long-term preservation of an intervertebral space. As a result, cervical nucleolysis has been shown to be an effective alternative to surgery for cervical soft disc herniations with refractory radicualgia.
Anesthesia, General ; Brachial Plexus Neuritis ; Chymopapain ; Constriction, Pathologic ; Intervertebral Disc Chemolysis* ; Microsurgery ; Spinal Cord Diseases ; Spondylosis

PURPOSE: To assess the results of an arthroscopic repair for traumatic peripheral tears of triangular fibrocartilage complex (TFCC, Palmer type Ib). MATERIALS AND METHODS: 10 patients with traumatic peripheral TFCC tear were treated with outside-in technique with arthroscope and evaluated with an average follow-up of 19 months (range, 15 to 28 months). The clinical outcomes were assessed with investigation of pain, range of motion, grip strength, return to job and patient's satisfaction. RESULTS: The arthroscopic repair of traumatic peripheral TFCC tear resulted in significant pain relief and increase in functional ability of wrist, that is, 8 excellent, 1 good and 1 fair results. At last follow-up, the average of flexion was 79° (range 76~86°), average of extension was 78° (range 70~84°), average pronation was 85° (range 75~91°) and average supination was 87° (range 79~92°). Nine patients except one were back to their original job. CONCLUSION: Arthroscopic repair of traumatic peripheral TFCC tear could be used for pain relief and increase in functional ability of wrist.
Arthroscopes ; Follow-Up Studies ; Hand Strength ; Humans ; Pronation ; Range of Motion, Articular ; Supination ; Tears* ; Triangular Fibrocartilage* ; Wrist

PURPOSE: To assess the results of an arthroscopic repair for traumatic peripheral tears of triangular fibrocartilage complex (TFCC, Palmer type Ib). MATERIALS AND METHODS: 10 patients with traumatic peripheral TFCC tear were treated with outside-in technique with arthroscope and evaluated with an average follow-up of 19 months (range, 15 to 28 months). The clinical outcomes were assessed with investigation of pain, range of motion, grip strength, return to job and patient's satisfaction. RESULTS: The arthroscopic repair of traumatic peripheral TFCC tear resulted in significant pain relief and increase in functional ability of wrist, that is, 8 excellent, 1 good and 1 fair results. At last follow-up, the average of flexion was 79° (range 76~86°), average of extension was 78° (range 70~84°), average pronation was 85° (range 75~91°) and average supination was 87° (range 79~92°). Nine patients except one were back to their original job. CONCLUSION: Arthroscopic repair of traumatic peripheral TFCC tear could be used for pain relief and increase in functional ability of wrist.
Arthroscopes ; Follow-Up Studies ; Hand Strength ; Humans ; Pronation ; Range of Motion, Articular ; Supination ; Tears* ; Triangular Fibrocartilage* ; Wrist

A sixty-eight-year-old female presented with suddenly developed pain in the left knee joint. On the first visit, there was severe tenderness on the anterolateral aspect of the knee joint with active flexion and extension limited by pain. Radiographs revealed multiple round calcific masses in the anterolateral aspect of the knee joint. Under the impression of intraarticular lesions, we performed arthroscopic examination of the knee joint, which revealed no intraarticular pathology. The masses were found in the extracapsular soft tissue and we performed excisional biopsy of the masses completely. The masses were confirmed as tumoral calcinosis by histopathologic examination. It rarely occurs around the knee joint and is usually asymptomatic. Idiopathic tumoral calcinosis with acute symptoms must be differentiated from other pathologic conditions such as gout or infection. The clinical manifestation of this case was opposed to the previous reports. So we report a rare case of idiopathic tumoral calcinosis of the knee joint with acute symptoms.
Biopsy ; Calcinosis* ; Female ; Gout ; Humans ; Knee Joint* ; Knee* ; Pathology

PURPOSE: The purpose of this study is to evaluate the clinical results of retrograde intramedullary fixation of metacarpal shaft fractures using two pre-bent Kirschner wires. MATERIALS AND METHODS: Between March 2006 and May 2008, 19 cases (17 patients) of metacarpal shaft fractures were treated with the retrograde intramedullary Kirschner-wire fixation and followed at least one year. The exclusion criteria were thumb metacarpal fractures, comminuted fractures and irreducible metacarpal spiral shaft fracture by closed manipulation. At final follow up all the cases were assessed with total active motion(TAM), rotational deformity, bony union and angular deformity based on the plain radiographes. RESULTS: At the last follow-up, all cases achieved bony union. Five cases showed less than 5degrees of dorsal angular deformity. The average union period was 6.3 weeks (range, 5-9weeks). Fifteen cases (79%) showed excellent results, four cases good results based on TAM. No case showed rotational deformity. Two cases had skin irritation by distal wire end, which was subsided after wire removal. CONCLUSIONS: In patients with a metacarpal shaft fracture, retrograde intramedullary fixation using two pre-bent K-wires can provide satisfactory clinical results.
Bone Wires ; Congenital Abnormalities ; Follow-Up Studies ; Fractures, Comminuted ; Humans ; Skin ; Thumb