A 58-year-old female with an episode of gross hematuria two months before and fever and chill for the past three days presented oliguric acute renal failure. She has taken NSAID intermittently for 18 years due to rheumatoid arthritis, and herb medicine for one week two months ago when gross hematuria developed. Physical examination revealed mild tenderness on costovertebral angles. Her blood pressure was 170/100 mmHg, the urinalysis showed >300 mg protein with many RBCs and 10-20 WBCs and the serum creatinine was 5.8 mg/dl. A renal biopsy performed on the 4th hospital day showed that it was overwhelmed by severe tubular lesions which reveal intratubular obstruction by massive erythrocyte casts and tubular necrosis. The glomeruli showed focal minimal crescents with many red blood cells entrapped in the crescents and in the capillaries. Immune deposits were not present. A renal failure resolved spontaneously and the patient was discharged three weeks later with creatinine of 2.4 mg/dl. In this patient, acute renal failure was considered to be due to a tubular lesion related to the glomerular bleeding from focal glomerulonephritis revealing minimal crescents.
Acute Kidney Injury* ; Arthritis, Rheumatoid ; Biopsy ; Blood Pressure ; Capillaries ; Creatinine ; Erythrocytes ; Female ; Fever ; Glomerulonephritis* ; Hematuria* ; Hemorrhage ; Humans ; Middle Aged ; Necrosis ; Physical Examination ; Renal Insufficiency ; Urinalysis

No abstract available.
Amenorrhea* ; Female

STATEMENT OF PROBLEM: Proper finishing and polishing enhance both the esthetics and the longevity of restored teeth. Blade finishing technique would be suited for smoothing and finishing. Evaluation of this technique are necessary. PURPOSE: The purpose of this study was to evaluate the blade finishing and polishing procedures on the surface profile and roughness of ormocer-based composite resin and nanohybrid composite resin. MATERIAL AND METHODS: The material included a ormocer-based composite resin (Admira(R) & Admira(R) Flow); a nanohybrid composite resin (Grandio(R) & Grandio(R) Flow). One hundred forty specimens of each group were prepared using a mylar strip and randomly divied into blade finishing and rubber polishing groups (n=10). The average surface roughness (Ra) in micrometers was measured and the surface profile was examined by scanning electron microscopy (SEM) (Magnification X 200). The data were analyzed by Mann-Whitney Test at 0.05 significance level. CONCLUSION: The results of this study indicated that the mylar strip produced the smoothest surface on all materials and among the finishing-polishing methods was not significanct difference (P>0.05). Ormocer-based flowable composite resin performedthe lowest variability in initial surface roughness among the tested materials.
Composite Resins ; Esthetics ; Longevity ; Microscopy, Electron, Scanning ; Polyethylene Terephthalates ; Rubber ; Tooth

PURPOSE: To evaluate the usefulness of transperineal sonography of the prostate in patients with previousabdominoperineal resection. MATERIALS AND METHODS: Transperineal prostatic sonograms were obtained from ninepatients with abdominoperineal resection. The shortest distance between the probe and the prostate gland, itsvolume, and its internal and external structures were evaluated for image quality, shape, border, and the degreeof distortion in internal echo. Because the number of patients was small, statistical analysis was not performed. RESULTS: Transperineal sonography of the prostate in eight patient was obtained at ease, except that one of ninepatients was not able to continue the procedure because of severe tenderness of the perineum and poor cooperation.Acceptable images of the prostate gland and their adjacent structures were obtained in one patient with less than1cm between the probe and prastate gland, three of four with between 1cm and 1.5cm, and one of three with morethan 1.5cm. CONCLUSION: In patients with previous abdominoperineal resection, transperineal sonography of theprostate may be a good imaging modality.
Humans ; Perineum ; Prostate*

Menigioma arising from the orbit is uncommonly encountered. Ectopic(extradural) meningiomas are exceedingly rare orbital tumors that do not originate from either the optic nerve or the intracranial meninges. We present a case of probable primary ectopic(extradural) orbital meningioma that was successfully treated with a complete surgical excision.
Meninges ; Meningioma* ; Optic Nerve ; Orbit

BACKGROUND/AIMS: Gabexate, a protease inhibitor, has been known to prevent pancreatic damage following ERCP. We conducted a prospective and randomized study to assess the preventive effect of gabexate. Methods: Of the 96 patients enrolled, 46 were treated with gabexate and 50 with placebo. The groups were similar with regard to sex, age, body-mass index, and the final diagnosis of ERCP. RESULTS: 24 patients (25.0%) had elevated pancreatic-enzyme levels; the frequency was similar in the two groups (P=0.48). Mean serum amylase value at 4 hours after ERCP was similar in patients with elevated basal level (220.5+/-43.2 U/L) and those with normal basal level (170.4+/-31.2 U/L). After the procedures, serum amylase values were lower in the gabexate group (137.1+/-19.8 U/L) than in the placebo group (212.0+/-50.4 U/L). The differences were not significant in the mean levels of amylase between the groups for any of imaging of the pancreatic ducts (pancreatic-duct imaging, 201.5+/-49.4 U/L, bile-duct imaging, 153.7+/-30.0 U/L). But in the patients with pancreatic duct imaging, serum amylase values were significantly higher in the placebo group (295.0+/-97.6 U/L) than in the gabexate group (112.0+/-10.6 U/L)(p<0.05). CONCLUSIONS: Prophylactic treatment with gabexate does not reduce pancreatic damage related to ERCP, but only in the patients with pancreatic duct imaging there were the significant differences between in the gabexate group and in the placebo group.
Amylases ; Cholangiopancreatography, Endoscopic Retrograde* ; Diagnosis ; Gabexate* ; Humans ; Pancreatic Ducts ; Pancreatitis ; Prospective Studies ; Protease Inhibitors

No abstract available.
Animals ; Isoproterenol* ; Plasma* ; Rats* ; Renin*

OBJECTIVES: This study investigated lung function in workers exposed to dusts, fumes and noxious gases at small foundries. METHODS: Lung function was measured in 148 male workers from 12 small foundries and 202 unexposed male workers. Pulmonary function tests performed included: forced vital capacity (FVC), forced expiratory volume in one second (FEV1), percent of FEV1/FVC (FEV1/FVC%), maximum mid-expiratory flow (MMEF), peak expiratory flow (PEF), and forced expiratory flow at 25, 50, and 75% of expired FVC (FEF25, 50, 75). RESULTS: Mean values of all ventilatory indices except FEF25 of foundry workers were significantly lower than those of controls. Specifically, following stratification by smoking habits, all ventilatory indices except FEF25 of foundry workers were significantly lower than those of controls who smoked; however, there were no significant differences observed in any ventilatory indices between nonsmoking exposed workers and controls. The results of multiple linear regression analysis indicated work duration as a significant predictor of a decrease in FVC%. CONCLUSIONS: This research indicates that combined occupational exposure to dust, fumes, and gases in small foundries is associated with a reduction in lung function. Smoking may also contribute to respiratory abnormalities. These results suggested that foundry workers should be required to undergo periodic lung function tests and-in addition to not smoking, efficient use of personal protection equipment while at work is recommended.
Dust ; Forced Expiratory Volume ; Gases ; Humans ; Linear Models ; Lung ; Male ; Occupational Exposure ; Respiratory Function Tests ; Smoke ; Smoking ; Vital Capacity

OBJECTIVE: This study aims to evaluate the degree of inter- and intraobserver agreement when characterizing breast abnormalities using the Breast Imaging Reporting and Data System (BI-RADS)-ultrasound (US) lexicon, as defined by the American College of Radiology (ACR). MATERIALS AND METHODS: Two hundred ninety three female patients with 314 lesions underwent US-guided biopsies at one facility during a two-year period. Static sonographic images of each breast lesion were acquired and reviewed by four radiologists with expertise in breast imaging. Each radiologist independently evaluated all cases and described the mass according to BI-RADS-US. To assess intraobserver variability, one of the four radiologists reassessed all of the cases one month after the initial evaluation. Inter- and intraobserver variabilities were determined using Cohen's kappa (k) statistics. RESULTS: The greatest degree of reliability for a descriptor was found for mass orientation (k = 0.61) and the least concordance of fair was found for the mass margin (k = 0.32) and echo pattern (k = 0.36). Others descriptive terms: shape, lesion boundary and posterior features (k = 0.42, k = 0.55 and k = 0.53, respectively) and the final assessment (k = 0.51) demonstrated only moderate levels of agreement. A substantial degree of intraobserver agreement was found when classifying all morphologic features: shape, orientation, margin, lesion boundary, echo pattern and posterior feature (k = 0.73, k = 0.68, k = 0.64, 0.68, k = 0.65 and k = 0.64, respectively) and rendering final assessments (k = 0.65). CONCLUSION: Although BI-RADS-US was created to achieve a consensus among radiologists when describing breast abnormalities, our study shows substantial intraobserver agreement but only moderate interobserver agreement in the mass description and final assessment of breast abnormalities according to its use. A better agreement will ultimately require specialized education, as well as self-auditing practice tests.
Adenocarcinoma/classification/*diagnosis ; Adenocarcinoma, Mucinous/classification/*diagnosis ; Adolescent ; Adult ; Aged ; Aged, 80 and over ; Biopsy ; Breast Neoplasms/classification/*diagnosis ; Carcinoma, Ductal, Breast/classification/*diagnosis ; Carcinoma, Intraductal, Noninfiltrating/classification/*diagnosis ; Female ; Follow-Up Studies ; Humans ; Middle Aged ; Observer Variation ; Predictive Value of Tests ; Radiology ; Reproducibility of Results ; Sensitivity and Specificity ; Societies, Medical ; Terminology as Topic ; Ultrasonography, Doppler, Color/statistics & numerical data ; Ultrasonography, Mammary/*statistics & numerical data

STATEMENT OF PROBLEM: Over the past decade, increased demand for esthetically pleasing restorations has led to the development of all-ceramic systems. Recent reports suggest that the all-ceramic crowns have excellent physical properties, wear resistance, and color stability. In addition, numerous ceramics have excellent biocompatibility, a natural appearance, and improved physical bonding with resin composite luting agents. However, the brittle nature of ceramics has been a major factor in their restriction for universal usage. Functional occlusal loading can generate stress in the luting agent, and the stress distribution may be affected by the marginal geometry at the finish line. Tooth preparation for fixed prosthodontics requires a decision regarding the marginal configuration. The design dictates the shape and bulk of the all ceramic crowns and influences the fit at the margin. PURPOSE: The purpose of this study was to evaluate the stress distribution within marginal configurations of all- ceramic crowns (90-degree shoulder, 110-degree shoulder, 135-degree shoulder). MATERIAL AND METHODS: The force is applied from a direction of 45 degrees to the vertical tooth axis. Three-dimensional finite element analysis was selected to determine stress levels and distributions. RESULTS AND CONCLUSION: The result of stress level for the shoulder marginal configuration was more effective on stress distribution at 135-degree shoulder margin. But the stresses concentrated around at 135-degree shoulder margin. The stress decreased apically at the surface between cements and alumina core, and increased apically at the surface between alumina core and veneering porcelain.
Aluminum Oxide ; Axis, Cervical Vertebra ; Ceramics ; Collodion ; Crowns ; Dental Cements ; Dental Porcelain ; Finite Element Analysis ; Prosthodontics ; Shoulder ; Tooth ; Tooth Preparation