This article statistically analyzes and discusses the problems in national supervision sampling of vertical mode steam sterilizers in 2014. For improving product quality, strengthening the supervision and management, it provides a reference.
Steam ; Sterilization ; methods ; standards

PURPOSE: This study aimed to assess the combined effect of dismantling before sterilization and aging on the accuracy (+/-10% of the target torque) of spring-style mechanical torque devices (S-S MTDs). METHODS: Twenty new S-SMTDs from two different manufacturers (Nobel Biocare and Straumann: 10 of each type) were selected and divided into two groups, namely, case (group A) and control (group B). For sterilization, 100 cycles of autoclaving were performed in 100 sequences. In each sequence, 10 repetitions of peak torque values were registered for aging. To measure and assess the output of each device, a Tohnichi torque gauge was used (P<0.05). RESULTS: Before steam sterilization, all of the tested devices stayed within 10% of their target values. After 100 cycles of steam sterilization and aging with or without dismantling of the devices, the Nobel Biocare devices stayed within 10% of their target torque. In the Straumann devices, despite the significant difference between the peak torque and target torque values, the absolute error values stayed within 10% of their target torque. CONCLUSION: Within the limitations of this study, there was no significant difference between the mean and absolute value of error between Nobel Biocare and Straumann S-S MTDs.
Aging* ; Dental Implants ; Steam* ; Sterilization* ; Torque*

PURPOSE: To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS: A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non-quantitatively. RESULTS: All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION: The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.
Acetone ; Ceramics ; Ethanol ; Spectrum Analysis ; Steam ; Ultrasonics

PURPOSE: To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS: A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non-quantitatively. RESULTS: All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION: The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.
Acetone ; Ceramics ; Ethanol ; Spectrum Analysis ; Steam ; Ultrasonics

The purpose of this study was to examine nutrition management conditions of lunch with the elementary schools and middle schools in the Changwon area. 292 students (5th and 6th graders) from three elementary schools and 330 students from three middle schools (boys, girls, and co-ed) participated in the aggregate selective plate waste measurement for 5 days. Planned menus, serving sizes and plate waste amount data were collected. Nutrient analyses for the planned, served and consumed menus at school lunches were performed by using CAN-PRO 3.0. Nutrient analyses of the planned, served and consumed menus were compared with nutrient management standard (former edition) for school lunch and 1/3 Korean Dietary Reference Intakes (KDRIs). Significant difference was found in the average consumption rate between the elementary schools (82.2%) and the middle schools (71.8%). Specifically, the consumption rates of steamed rice (p < 0.001), side dish 1 (p < 0.001), and Kimchi (p < 0.01) at the middle schools were significantly lower than those of the elementary schools. When the nutrient contents in the served menus were put into percentages to the nutrient contents in the planned menus, middle schools (92.3%) showed bigger serving loss than the elementary schools (95.4%). In the nutrient assessment comparied with nutrient management standard (former edition), middle school lunches showed comparatively less energy or less some nutrient contents against the standard than the elementary school lunches. Specifically, in case of boys in middle schools, Vitamin C was the only nutrient content that satisfied the standard in the planned menus, served menus and consumed menus. In the 1/3 KDRIs based assessment, middle schoolers were found not to be provided proper nutrients with school lunches. To improve nutrition management at middle school foodservices, dietitians should reinforce nutrient assessment for menu planning, and try to decrease serving loss and plate waste.
Ascorbic Acid ; Humans ; Lunch ; Menu Planning ; Steam

PURPOSE: To evaluate the feasibility of in-vivo 1H magnetic resonance spectroscopy (1H-MRS) for differentiation between hepatic and renal cysts, with emphasis on the analysis of cystic content. MATERIALS AND METHODS: The 1H-MR spectra of 43 cystic lesions (15 hepatic and 28 renal) obtained using in -vivo 1H-MRS at 1.5 T and with a localized proton STEAM sequence were evaluated. We calculated the ratio of the peak area of lipid/water (Rlipid/water), protein/water (Rprotein/water) and lipid/protein (Rlipid/protein), paying particular attention to identifying differences in peak area ratios between the two types of cyst. RESULTS: The 1H-MR spectra from 26.7% (4/15) of hepatic and 67.9% (19/28) of renal cysts showed the lipid peak as most prominent. Mean+/-standard deviations of the Rlipid/water of hepatic and renal cysts were 0.38+/-0.30x10-6 and 8.42+/-23.24x10-6, respectively; for Rprotein/water the corresponding figures were 0.83+/-0.74x10-6 and 1.50+/-2.94x10-6, and for Rlipid/protein, 0.57+/-0.64 and 2.44+/-3.26. All differences were statistically significant (p<0.05), and positive correlation between lipid and protein in hepatic and renal cysts was demonstrated. CONCLUSION: The different in-vivo 1H-MRS findings, for hepatic and renal cysts can be used in comparative study of cystic tumors of the liver and kidney.
Kidney ; Liver ; Magnetic Resonance Spectroscopy ; Protons ; Steam

An unusual case of homicide of a 21-year-old man who was smothered with a hot steam towel by his mother and a pastoress in the name of exorcism. Homicidal smothering in adults is rare, but does occur when the victims are not capable of defending themselves in situations such as chronic illness, old age, drug intoxication or when restrained by other people. In this case, distinct facial scalding was a clue to smothering with a hot steam towel.
Adult ; Chronic Disease ; Homicide ; Humans ; Mothers ; Steam

Laccase is one of the most important oxidoreductase with industrialization potential. However, due to the high cost and catalytic toxicity of laccase synthetic mediator, the laccase-mediator-system still cannot achieve industrialization. Therefore, searching for high efficient, environment-friendly, and cheap natural mediator from small molecule precursors or intermediates and degradation products of lignin has been considered as a hot research topic. Therefore, we introduce the type and catalytic mechanism of laccase mediator, the composition and separation of natural laccase mediator from water washed solution of steam exploded straw, black liquor and lignocelluloses degradation products during the fermentation of white-rot fungi. We also provide the theoretical and technical direction for exploring of high reactive of laccase natural mediators and achieving the oriented high-value utilization of lignocellulose degradation products.
Basidiomycota ; Fermentation ; Laccase ; chemistry ; Lignin ; chemistry ; Steam

PURPOSE: To evaluate regional differences in relative metabolite ratios in the normal human brain by 1H MRspectroscopy (MRS), and compare the spectral quality obtained by the automated prescan method (PROBE) and themanual method. MATERIALS AND METHODS: Localized 1H MRS was performed on a GE 1.5T SIGNA MRI/MRS system (version5.5) with active shielded gradients. For 20 normal volunteers aged 8-47 years, spectral parameters were adjustedby the auto-prescan routine provided by a PROBE package(N=34)and manually (N=33). Five regions of the human brainwere examined (N=PROBE,manual): frontal white matter(N=6,10), parietal white matter(N=8,9), basal ganglia(N=6,5),thalamus(N=4,5), and cerebellum(N=4,4). For all spectra, a STEAM localization sequence with three-pulse CHESS H2Osuppression was used, with the following acquisition parameters: TR=3.0 sec, TE=30 msec, TM=13,7 msec, SW=2500Hz,SI=2048 pts, AVG=48, and NEX=2. RESULTS: A total of 61 reliable spectra were obtained by PROBE (28/34=82%success) and by the manual method (33/33=100% success). Regional differences in the spectral patterns of the fiveregions were clearly demonstrated by both PROBE and the manual methods. For prescanning, the manual method tookslightly longer than PROBE (3-5 mins and 2 mins,respectively). There were no significant differences in spectralpatterns and relative metabolic ratios between the two methods. However, auto-prescan by PROBE seemed to be veryvulnerable to slight movement by patients, and in three cases, an acceptable spectrum was thus not obtained. CONCLUSION: PROBE is a highly practical and reliable method for single voxel 1H MRS of the human brain; the twomethods of prescanning do not result in significantly different spectral patterns and the relative metaboliteratios. PROBE, however, is vulnerable to slight movement by patients, and if the success rate for obtainingquality spectra is to be increased, regardless of the patient's condition and the region of the brain, it must beused in conjunction with the manual method.
Brain* ; Healthy Volunteers ; Humans* ; Magnetic Resonance Spectroscopy* ; Rabeprazole ; Steam

The purpose of this study was to analyze the effects of Bath and Sauna on IOP, BP, PR, and BT. This study was performed in 120 eyes of 60 volunteers. The IOP, BP, PR, and BT were taken before and after Bath and Sauna. The results of this study are briefly summarized as follows; A. Changes and significance of IOP. 1. The mean of IOP was 13.43 +/- 2.4mmHg before Bath and 16.98 +/- 2.7mmHg just after Bath. This change was statistically significant(P<0.01). 2. The mean of IOP was 13.43 +/- 2.7mmHg before Wet Sauna and 14.12 +/- 3.6mmHg just after Wet Sauna. This change was not statistically significant(P>0.05). 3. The mean of IOP was 12.64 +/- 2.1mmHg before Dry Sauna and 15.45 +/- 2.8mmHg just after Dry Sauna. This change was statistically significant(P<0.01). B. Changes and significance of BP. 1. Changes of systolic pressure between Before and After Bath, Wet Sauna, and Dry Sauna were statistically significant(P<0.01). 2. Changes of diastolic pressure between Before and After Bath, Wet Sauna, and Dry Sauna were statistically significant(P<0.01). C. Changes and significance of PR and BT Changes of PR(0.01 Baths* ; Blood Pressure ; Body Temperature* ; Steam Bath* ; Volunteers