Solvents ; chemistry ; Technology, Pharmaceutical ; methods

OBJECTIVETo compare the effect of different solvents such as water, ethanol, methanol, ethyl acetate and petroleum ether on extraction of 10 effective components from Ligusticum chuanxiong and component characteristics of corresponding extracts.

METHODUltrasonic assisted solvent extraction and high performance liquid chromatography quantitative analysis were adopted to determine effective components. CAPCELL PAK C18 column (4.6 mm x 150 mm, 5 microm) was adopted. The mobile phase was methanol-0. 5% HAc for gradient elute. The detection wavelength was 280 nm. The column temperature was 30 degrees C. The flow rate was 0. 7 mL x min(-1). The sample size was 10 microL.

RESULTMethanol or ethanol showed no significant difference in extraction of ferulic acid, hydroxyphthalide, alkylphthalide and diligustilide. Ethyl acetate displayed relatively low extraction ratios in hydroxyphthalide and ferulic acid. Water and petroleum ether showed relatively low extraction ratios in all four effective components, and water extracts showed different component characteristics.

CONCLUSIONEthanol and methanol are the most suitable solvents to extract four effective components from L. chuanxiong.

OBJECTIVETo study the solubility peak and dielectric requirement of the Buyang Huanwu docoction materials, and provide theoretical and experimental foundation for selecting extraction solvent for extracting traditional Chinese drugs (TCD).

METHOD11 types of solvents were employed as single or complex solvent systems, whose solubility parameter and dielectric constant were from 14.11 to 47.86, dielectric requirement from 1 to 80 respectively, to lixiviate Buyang Huanwu decoction (5 g per samples) in nearly saturate volume as V0 for materials at 25 degrees C. The apparent solubilities of extracts were determined and calculated out according to the section of determination of extract in the appendix of 'Chinese Pharmacopoeia'.

RESULTThe saturate solvent V0 for materials powder were 0.21, 0.31, 0.49, 0.36, 0.77, 0.93, 0.86, 0.92, 1.08, 1.00, 1.14 mL x g(-1), respectively. The apparent solubility of Buyang Huanwu docoction for each solvent system were 114.0, 101.3, 73.40, 109.4, 210.7, 295.0, 501.4, 437.0, 355.6, 423.1, 210.6 g x mL(-1), respectively, among which the max apparent solubility, illustrated as solubility peak, was carried out by methanol-water (68: 32) with 47.5 corresponding to the Buyang Huanwu docoction dielectric requirement.

CONCLUSIONThe apparent solubilities of (TCD) and their formula are controlled by dielectric constant of extraction solvent, and are in accordance with stable dielectric requirement.

Based on the nanofiltration mass transfer model, the enhanced separation behavior of ephedrine in organic solution was studied. In the experiment, the sensitive region of ethanol concentration and pH on the rejection of ephedrine was screened out by Box-Behnken central composite experiment design. Furthermore, to analyze the separation regularity of ephedrine and organic solution, the correlation between mass transfer coefficient and concentration of organic solvent was fitted with the changed organic solution by nanofiltration mass transfer mathematical model. Experiments showed the enhanced separation behavior, the decrease in the mass transfer coefficient while the increase in ethanol concentration from 20% to 40%, MWCO at 450 and pH 6.0. Under the same conditions, the enhanced separation behavior was appeared as the solvent changed into methanol and acetonitrile, the enhanced effect was positively correlated with the concentration of the three common organic solvents, and the effect order was acetonitrile>ethanol>methanol. This study took ephedrine as an example, and explored the mechanism of nanofiltration separation in the environment of organic solution, so as to provide references for nanofiltration separation for heat-sensitive traditional Chinese medicine of alkaloid.
Ephedrine ; chemistry ; Ethanol ; Methanol ; Molecular Weight ; Solvents

OBJECTIVETo demonstrate the solubility of Chinese herbal compound with solubility parameters.

METHODThe solubility parameters of Liangfu effective components and Liangfu compound were determined by inverse gas chromatograph (IGC) and group contribution. Hansen ball was plotting by HSPiP, which could be used to investigate the solubility of Liangfu effective components and Liangfu compound in different solvents. And the results were verified by approximate solubility.

RESULTLiangfu effective components and Liangfu compound could be dissolved in chloroform, ethyl acetate, acetone, octanol and ether, and were slightly soluble in glycerol, methanol, ethanol and propanediol, but could not be dissolved in water. They were all liposoluble, and the results were the same as the test results of the approximate solubility.

CONCLUSIONThe solubility of Chinese herbal compound can be expressed by solubility parameters, and it is accurate, convenient and visual.

Content of multiple components (neochlorogenic acid,L-tryptophan,vicenin-2,isoquercitrin,and astragalin) in Moringa oleifera leaves was determined by high-performance liquid chromatography (HPLC),and the absolute content-time curves were plotted.Based on Fick's law of diffusion and Higbie's penetration theory,the parameters of the equations were calculated,and the measured results were substituted into the mathematical model to fit the equations.The n and a obtained from the equations on the decocting time factor and the solvent volume were close to each other.The dynamic models of the five components are as follows:■.The variation of the content of multiple components in M.oleifera leaves with time and solvent volume was explored.It was found that the content of the components was the highest when the leaves were decocted for 30 min with solvent volume 12 folds of the medicinal material.The dissolution and destruction of components and the diffusion movement of components are the main causes of the content change of M.oleifera leaves at different time and with different solvent volumes.The R~2of the linear equations on the content and the equations on the decocting process (5-30min and solvent volume 12-20 folds of the medicinal materials) was≥0.999 8 and≥0.9,respectively.Thus,the content determination and the decocting kinetic model had high accuracy,which can reflect the change law of the content of key components in M.oleifera leaves during the decoction.This study is expected to serve as a reference for optimizing the decocting technology.
Kinetics ; Moringa oleifera/chemistry* ; Plant Leaves/chemistry* ; Solvents ; Tryptophan/analysis*

Eight compounds were isolated from the ethyl acetate extraction of Prunus mume by column chromatography. On the basis of physicochemical properties and spectrum analysis, these compounds were identified as isoquercitrin-6″-O-benzoate(1), pinoresinol(2), naringin(3), ethyl-β-D-glucopyranoside(4), astragalin(5), quercetin(6), hypericin(7), and rutin(8). Among them, compound 1 was a new natural product, and compounds 2-5 were isolated from this plant for the first time. In vitro study, compounds 1, 3, 5-8 could significantly increase the cell survival ratio.
Acetates ; Phytochemicals/analysis* ; Plant Extracts/chemistry* ; Prunus/chemistry* ; Solvents

With the rapid development of industrial biotechnology, breakthrough in enzymology and biocatalysis has been made in recent years, especially in areas of stability and activity of enzyme in nonaqueous media, screening, construction and modification of solvent-tolerant biocatalysts, as well as the development of green solvent with excellent biological and environmental compatibility. Recent trend and future focus include: in silico virtual screening and construction of solvent-tolerant biocatalysts based on bioinformatic technology, modification and construction of native solvent-tolerant biocatalysts, the development of environmental friendly green solvent such as ionic liquids.
Animals ; Biocatalysis ; Biotechnology ; trends ; Enzymes ; chemistry ; genetics ; Humans ; Solvents

Lonicerae Japonicae Flos and Artemisiae Annuae Herba(LA or Jinqing) alcohol precipitation has various process parameters and complex process mechanism, and is one of the key units for manufacturing Reduning Injection. In order to identify the critical process parameters(CPPs) affecting the weight of the extract produced from the alcohol precipitation process, 259 batches of historical production data from 2017 to 2018 were collected, with a total of 829 318 data points. These data showed characteristics of large data, such as a large data volume, a low value density, and diverse sources. The data cleaning and feature extraction were first performed, and 48 feature variables were selected. The original data points were reduced to 9 936. Then, a combination of Pearson correlation analysis and grey correlation analysis were used to screen out 15 potential critical process parameters(pCPPs). After that, the partial least squares(PLS) was used in prediction of the weight of the extract, proving that the performance of predictive model based on 15 pCMAs is equivalent to that of predictive model based on 48 feature variables. The variable importance in projection(VIP) index was used to identify 9 CPPs, including 2 alcohol precipitation supernatant volume parameters, 4 initial extract weight parameters and 3 added alcohol volume parameters. As a result, the number of data points was 1 863, accounting for 0.28% of the original data. The big data analysis approach from a holistic point of view can effectively increase the value density of the original data. The critical process parameters obtained can help to accurately describe the quality transfer mechanism of the Jinqing alcohol precipitation process.
Alcohols ; Big Data ; Drugs, Chinese Herbal/chemistry* ; Solvents ; Technology, Pharmaceutical

With low molecular weight chitosan and poloxamer 188 as the joint carriers, ginsenoside Rg3 solid dispersions were prepared by using the solvent evaporation method for an in vitro dissolution test. Subsequently, differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and X-ray diffraction (X-RD) were adopted for a phase analysis. The results showed that the 60 min in vitro cumulative dissolution rate of ginsenoside Rg3 solid dispersions prepared with low molecular weight chitosan and poloxamer 188 at the ratio of 2:1 exceeded 90%, and the drug was dispersed in carriers in an amorphous state. Therefore, ginsenoside Rg3 solid dispersions prepared with low molecular weight chitosan and poloxamer 188 could help significantly improve the drug dissolution, with a practical application value.
Chitosan ; chemistry ; Drug Compounding ; methods ; Ginsenosides ; chemistry ; Molecular Weight ; Poloxamer ; chemistry ; Solvents ; chemistry