PURPOSE: This study aimed to investigate the correlation between the solubility and the amount of fluoride release when a resin surface coating agent is applied to RMGIC. MATERIALS AND METHODS: To measure the fluoride release and solubility, Fuji II LC®and Filtek™ Z350XT without a surface coating, Fuji II LC® with G coat plus™ and Fuji II LC® with Permaseal® were prepared. And the amount of fluoride release and solubility were measured. RESULTS: There was no significant difference in the daily fluoride release between the surface coating agents. The cumulative fluoride release was significantly different between the groups using RMGIC at 56 days (P < 0.05). In the solubility measurement, RMGIC without surface coating was significantly different only on the 7th day compared to the other three groups (P < 0.05). CONCLUSION: Surface coating agents can prevent the degradation of properties by the initial solvent in RMGIC. Therefore, fluoride is preserved inside the restorative material and the effect of surface coating after the addition is reduced, so that the effect on fluoride release and storage is also reduced.
Fluorides ; Glass ; Solubility

This study evaluated the effects of epimedium polysaccharide(EPS) on the solubility of icariin and baohuoside Ⅰ so as to preliminary explore its solubilization function and the underlying mechanism. The solubility of these two insoluble flavonoids in water and polysaccharide solutions was compared by high performance liquid chromatography, and the mechanism was investigated by diffe-rential scanning calorimetry(DSC) and critical micelle concentration determination. The results indicated that their solubilization in crude EPS solutions was concentration-dependent. The solubility of icariin and baohuoside Ⅰ in 20 mg·mL~(-1) EPS-1-1 was 9.05 times and 5.76 times that in water, respectively; while their solubility in 20 mg·mL~(-1) EPS-2-1 was 10.55 and 8.39 times that in water, respectively. The change of the DSC thermograms suggested the formation of new complexes from icariin and baohuoside Ⅰ with polysaccharides. The critical micelle concentrations proved the micellar properties of both EPS-1-1 and EPS-2-1. In short, EPS can significantly increase the solubility of icariin and baohuoside Ⅰ, the mechanism of which may be related to the formation of micellar complexes between EPS and insoluble flavonoids.
Epimedium ; Flavonoids ; Polysaccharides ; Solubility

OBJECTIVE: Ibuprofen, a nonsteroidal anti-inflammatory drug, is poorly soluble leading to its slow systemic absorption. This study aimed to optimize the formulation of an ibuprofen hydrogel-based matrix tablet to improve its dissolution for better oral bioavailability.

METHODS: Raw material of ibuprofen was subjected to quality control test and compatibility test with the excipients. Six trial formulations were performed, with polyethylene glycol (PEG) 6000 as the matrix for the first three trial formulations and carbopol for the remaining trial formulations. Finished product quality control (FPQC) tests were conducted to choose the best formulations to be compared against the marketed products using comparative dissolution and stability studies.

RESULTS: Among the trial formulations, Formulation 3 and Formulation 4 displayed highly satisfactory results from FPQC. The results of disintegration tests, comparative dissolution, and stability studies suggested carbopol as the better polymer over PEG 6000 which made Formulation 4 as the best.

CONCLUSION: Based on the percent drug release and similarity factor, it was concluded that the formulation optimized in this study was considered to be similar with the standard liquigel.

Drug's quality on the market must conform to standards of manufacturer based on Vietnamese Pharmacopoeia III. This report deals with standard about dissolubility of some antibiotic pill products of Pharmaceutical Factory X circulating on the market, such as amoxiciline, penicilline, cloramphenicol, ciprifloxacine, .... (10 types) by Dissolution test method, showed that there were 9 products (90%) attained standards Vietnamese Pharmacopoeia III. This is a impressed result of Vietnamese Pharmaceutical Industry in enhancing drug's quality
Solubility ; Antibiotics, Antifungal ; Quality Control

Intestinal Absorption ; Schistosomicides/*metabolism ; Solubility

To analyze the content and type of soluble proteins in Cordyceps sinensis from different producing areas and processed with different methods with bradford method and 2-DE technology, in order to discover significant differences in soluble proteins in C. sinensis processed with different methods and from different producing areas. The preliminary study indicated that the content and diversity of soluble proteins were related to producing areas and processing methods to some extent.
Cordyceps ; chemistry ; Proteins ; chemistry ; Solubility

This study was to measure and compare the amount of fluoride, microhardness and solubility of high viscosity glass ionomer and resin-reinforced glass ionomer during 84 days.Fuji IX GP EXTRA, Fuji IX GP, Fuji II LC and Filtek™ Z350XT stored in deionized water for 84 days to measure fluoride release, microhardness and solubility.As a result of measurement of fluoride release, all the glass ionomers showed the highest amount of fluoride release on day 1 and gradually decreased. Fuji IX GP EXTRA showed the highest amount of fluoride release and cumulative release. And Fuji IX GP and Fuji II LC showed no significant difference. Microhardness measurements showed that all experimental groups decreased 1 day after exposure to water. After 84 days, microhardness showed no significant difference between Fuji IX GP EXTRA and Fuji IX GP, and Fuji II LC was the lowest. In the solubility measurement, Fuji IX GP EXTRA, Fuji IX GP, and Fuji II LC increased rapidly to 21 days. After 21 days, there was no significant difference in the three groups. As a result, short term fluoride release affects solubility and microhardness, but long term fluoride release has no correlation.Through this study, the amount of fluoride, microhardness, and solubility of various glass ionomers were evaluated, and these properties could be applied clinically.
Fluorides ; Glass ; Solubility ; Viscosity ; Water

This study was mainly based on the compatibility of Puerariae Lobatae Radix and Chuanxiong Rhizoma to prepare submicron emulsion and evaluated its physical and pharmaceutical properties. Firstly, pseudo-ternary phase diagrams were drawn by dripping method which took Chuanxiong oil as the oil phase and the area of microemulsion region as the index. On this basis, suitable emulsifier and co-emulsifier were screened for the preparation of Chuanxiong oil submicron emulsion. Then, the formula realizing the largest oil loading was selected. Finally, puerarin substituted part of emulsifier and co-emulsifier to lower their content, so as to form puerarin-Chuanxiong oil submicron emulsion featuring the combination of medicine and adjuvant. Its particle size, zeta potential, centrifugal stability and storage stability were determined, and the in vitro drug release behavior was investigated by dialysis bag method, based on which the quality of the as-prepared submicron emulsion was evaluated comprehensively. The proposed method was proved feasible for the preparation of Chuanxiong oil submicron emulsion, which adopted polyoxyethylene castor oil(EL-40) as the emulsifier and was free from co-emulsifier. The formula of the maximum oil loading was found as Chuanxiong oil∶EL-40∶water 3∶7∶90. Further, puera-rin successfully replaced up to 10% of the emulsifier in submicron emulsion. Eventually, the optimal drug-loading formula was determined as puerarin∶Chuanxiong oil∶EL-40∶water 7∶30∶63∶900. The quality evaluation results of the as-prepared submicron emulsion demonstrated that the average emulsion droplet size was 333.9 nm, the PDI 0.26, and the zeta potential-10.12 mV. The submicron emulsion had a good centrifugal stability and did not present any instable phenomena such as delamination and precipitation during its standing still for 50 days. The evaluation of in vitro drug release behavior indicated that the submicron emulsion was capable of releasing the drug completely. The puerarin-chuanxiong oil submicron emulsion prepared in this study possessed a stable quality and to some extent increased the solubility of puerarin along with a sustained-release effect. This study provided ideas for the clinical application of puerarin.
Emulsions ; Isoflavones ; Particle Size ; Solubility

OBJECTIVES: This study evaluated color differences (ΔEs) and translucency parameter changes (ΔTPs) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. MATERIALS AND METHODS: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE L*a*b* values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ΔEs and ΔTPs of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (α = 0.05). The ΔEs after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. RESULTS: After one month in coffee, ΔEs of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ΔTPs decreased. The ANOVA of ΔEs and ΔTPs revealed significant differences in two main factors, immersion periods and media, and their interaction except for ΔEs of TEL (Telio CAD, Ivoclar Vivadent). The ΔEs significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ΔEs and water sorption or solubility in water. CONCLUSIONS: The ΔEs of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.
Coffee* ; Composite Resins ; Immersion* ; Solubility ; Water

OBJECTIVETo compare the influence on the dissolution of tanshinone IIA (TS IIA) solid dispersions in complex carriers and single, which used in preparation of TS IIA solid dispersions, and further enhance the dissolution of TS IIA.

METHODThe TS IIA solid dispersions were prepared by solvent technique with polyvinylpyrrolidone K30 (PVPK30), poloxamer188 (F68) and combination of PVPK30 and F68 as carriers, respectively. The physical characteristics of TS IIA solid dispersions was studied using differential scanning calorimetry (DSC). Dissolution rates were studied using small cup method (CHP XC III). The solubility of TS IIA with the solid dispersions and pure drug form were determined by HPLC method.

RESULTThe DSC analysis suggested that TS IIA was dispersed as an amorphous form in the combination of PVPK30 and F68. Dissolution profile of the prepared solid dispersions could be described by Weibull equation (R>0.99). For tested three carries, Td value (calculated time to 63.2% of total drug release according to Weibull equation) were (90.40 +/- 2.82) min, (204.5 +/- 8.20) min and (25.83 +/- 0.13) min, respectively. The PVPK30/F68-TS IIA solid dispersion resulted in a significant increase of TS IIA solubility compared with prepared PVPK30-TS IIA and F68-TS IIA solid dispersions (P<0.01).

CONCLUSIONAs compared to single use of PVPK30 or F68, the combination of PVPK30 and F68 improve the dissolution rate and solubility of TS IIA significantly in the prepared solid dispersions (P<0.01). The application of complex carriers in solid dispersion technology should be paid more attention to improvement of poorly soluble drugs dissolution in the future.