This paper summarizes Professor LU Fang's clinical experience in treating systemic lupus erythematosus （SLE） based on the differentiation and treatment of heat-toxin and blood-stasis in the collaterals. SLE is generally characterized by deficiency in origin with excess in manifestation. The core pathogenesis is heat-toxin obstructing the collaterals. During the acute active stage， the predominant pattern is blazing heat-toxin causing blood stasis， while in the chronic remitting stage， the main pattern is toxic stasis blocking the collaterals with qi and yin deficiency. Clinical treatment follows the basic principle that treat with salty-cold herbs， when heat invades internally and that assist with acrid-dispersing herbs when stasis obstructs the collaterals. The self-formulated Yimian Decoction （抑免汤） serves as the base formula and is applied in stages. During the acute active stage， it is often combined with herbs for clearing heat and detoxifying， cooling blood and resolving stasis， and unblocking the collaterals. In the chronic remitting stage， it is often combined with herbs for activating blood circulation and unblocking the collaterals， as well as tonifying qi and nourishing yin.

Liver cancer is one of the most common malignant tumors worldwide. Currently, the available treatment methods cannot fully control its recurrence and mortality rate. Establishing appropriate animal models for liver cancer is crucial for developing new treatment technologies and strategies. The patient-derived xenograft (PDX) model preserves the tumor's microenvironment and heterogeneity, which makes it advantageous for biological research, drug evaluation, personalized medicine, and other purposes. This article reviews the development, preparation techniques, application fields, and challenges of PDX models in liver cancer, providing insights for the research and exploration of PDX models in diagnostic and therapeutic strategies of liver cancer.
Liver Neoplasms/drug therapy* ; Animals ; Humans ; Xenograft Model Antitumor Assays/methods* ; Mice ; Disease Models, Animal

Objective:To establish a tumor tissue xenograft (PDX) model derived from liver cancer patients and explore the factors affecting tumorigenicity of liver cancer in the PDX model.Methods:The hepatocellular carcinoma tissues were inoculated subcutaneously in the axilla of NPG mice using the tissue block method to establish a PDX model. The demographic characteristics and related clinical examination data of 60 hepatocellular carcinoma patients were collected using the electronic medical record system and comprehensive medical information system of Beijing You'an Hospital, affiliated to Capital Medical University. The hepatocellular carcinoma samples of 24 cases were sequenced using the Oak Wing TM-808 gene detection reagent and high-throughput sequencing technology. SPSS 17.0 statistical software was used for statistical analysis, and the count data were analyzed using the χ2 test. Results:The tumorigenicity rate of PDX samples from 60 patients with liver cancer was 35% (21/60). The average tumorigenic duration in the PDX-P0 generation was 110.71±50.45 days. There were statistically significant differences ( P<0.05) corresponding to Edmondson grade ( χ2=5.910, P=0.015) and Ki67 expression ( χ2=4.615, P=0.032) among PDX with tumorigenicity and without tumorigenicity between the liver cancer samples. There was no statistically significant difference in gene mutation (TOP25) among PDX with tumorigenicity and without tumorigenicity between liver cancer samples. Conclusion:The factors affecting the tumorigenicity of liver cancer in PDX models are complex. The high pathological grade and strong Ki67 expression may be the key factors for the completion of liver cancer in PDX models.

BACKGROUND:Currently,pedicle screw fixation technology is recognized as the gold standard for lumbar posterior fusion surgery.However,this technique is associated with several complications such as suboptimal screw placement,loosening,and fracture.Addressing these issues,it requires a thorough investigation into the mechanical properties of screw reinsertion to optimize surgical procedures and enhance success rates and safety.OBJECTIVE:By combining finite element analysis with biomechanical experiments,this study aims to compare and analyze the mechanical performance of traditional trajectory pedicle screws during multiple extraction processes.The goal is to reveal patterns in screw extraction strength over repeated withdrawals,providing scientific insights into the safety and effectiveness of pedicle screw reinsertion for clinicians.METHODS:Based on CT scan data,a three-dimensional reconstruction of the L4 vertebra model was performed.Three-dimensional printing technology was used to create biological experimental samples.A pull-out experiment was conducted according to a screw placement plan.Utilizing CT data and standard pedicle screw parameters,a finite element model of the L4 vertebra and a pedicle screw model(diameter 6.0 mm,length 45 mm)were established.The model was divided into five operating conditions based on screw placement angle and cycles.A finite element model was developed to simulate axial pull-out testing,analyzing stress distribution in the vertebral body and maximum axial pull-out strength of the screw.Mechanics experimental results of three-dimensional printing were compared and analyzed against simulation outcomes.RESULTS AND CONCLUSION:(1)A dedicated experimental setup for pedicle screw extraction from single vertebrae was designed and constructed.(2)In the three-dimensional printing experiment,our groups of models were compared between correctly placed screws and once improperly placed screws.The correctly placed screws group exhibited a maximum pull-out force of(1 422.63±23.80)N.Furthermore,with increasing deviation angles in screw placement,the maximum pull-out forces of each group gradually decreased.(3)Comparing the condition of a single improper nail placement with repositioning the nail correctly,when the offset angle of the improper placement exceeded that of Model 3,correctly repositioning the nail helps to increase the screw's pull-out resistance.(4)Comparing the scenario of two consecutive improper nail placements with repositioning correctly after two improper placements,correctly repositioning the nail reduced the screw's pull-out resistance.Without replacing the screw,it was not advisable to attempt a third nail placement.(5)Experimental pull-out strength of three-dimensional printing correlates significantly with finite element simulation results,with a correlation coefficient of 0.98.There is no significant difference in the outcomes between the two methods(P＞0.05).

Objective To explore the biological functions and mechanisms of PIWI-interacting RNA(piRNA)in cervical cancer(CC).Methods RT-qPCR was used to detect the expression level of piRNA-2732 in CC tissue,CaSki cells and End1/E6E7 cells.EpiQuik m6A RNA methylation quantification kit was used to detect the methylation level of m6A RNA in CaSki cells.The expression levels of methyltransferases(METTL3,METTL14 and WTAP)and demethylases(FTO,ALKBH5)mRNA in CaSki cells were detected by RT-qPCR.After culturing CaSki cells to logarithmic growth stage,they were divided into six groups:piRNA-2732 mimic negative control group(mi-NC group),piRNA-2732 mimic group(mi-2732 group),piRNA-2732 inhibitor negative control group(in-NC group),piRNA-2732 inhibitor group(in-2732 group),piRNA-2732 mimic+METTL3 knockdown control group(mi-2732+si-NC group),and piRNA-2732 mimic+METTL3 knockdown group(mi-2732+si-METTL3 group).The viability of CaSki cells was detected by CCK8 assay.Colony formation assay was used to detect the proliferation ability of CaSki cells.Transwell experiment was used to detect the migration and invasion ability of CaSki cells.RT-qPCR and Western blot were used to detect the expression of methyltransferase like protein 3(METTL3).Transfected METTL3 wild-type(METTL3-WT)and METTL3 mutant(METTL3-MUT)in the mi-NC group,mi-2732 group,in-NC group,and in-2732 group respectively,and detected the effect of piRNA-2732 on METTL3 through dual luciferase reporter gene assay.Results Compared with the adjacent tissues,the expression of piRNA-2732(3.84±1.08 vs 1.32±0.53)was significantly higher in the cancer tissues of CC patients,and the difference was statistically significant(t=5.115,P<0.001).Compared with end1/E6E7 cells,the expression of piRNA-2732(1.00±0.13 vs 1.67±0.16)in CaSki cells was significantly higher,and the difference was statistically significant(t=5.632,P<0.01).Compared with mi-NC group,mi-2732 group promoted the viability,proliferation,migration and invasion of CaSki cells,and the differences were statistically significant(t=4.410～11.040,all P<0.01).Compared with mi-NC group,mi-2732 group increased m6A RNA methylation level and METTL3 mRNA and protein,the differences were statistically significant(t=6.176,9.211,12.550,all P<0.05).The results of dual luciferase reporter gene testing showed that compared with the mi-NC+METTL3-WT group,the relative luciferase activity of mi-2732+METTL3-WT group was significantly increased(t=11.850).Compared with mi-2732+METTL3-WT group,the relative luciferase activity of mi-2732+METTL3-MUT group was significantly lower(t=12.740),and the difference was statistically significant(all P<0.000 1).Compared with in NC+METTL3-WT group,the relative luciferase activity of in-2732+METTL3-WT group was significantly lower(t=7.828),compared with in-2732+METTL3-WT group,the relative luciferase activity of CaSki cells in in-2732+METTL3-MUT group was significantly increased(t=8.146),and the difference was statistically significant(all P<0.001).Compared with mi-2732+si-NC group,the expression level of m6A in mi-2732+si-METTL3 group was significantly lower,and the difference was statistically significant(t=7.630,P<0.01).Compared with mi-2732+si-NC group,the proliferation ability,colony number,cell migration and invasion ability of CaSki cells in mi-2732+si-METTL3 group were significantly decreased,and the differences were statistically significant(t=3.695～4.891,all P<0.001).Conclusion piRNA-2732 is overexpressed in CC tissues and cells,and piRNA-2732 promotes tumor development in CC through METTL3 mediated m6A methylation.

BACKGROUND:Currently,pedicle screw fixation technology is recognized as the gold standard for lumbar posterior fusion surgery.However,this technique is associated with several complications such as suboptimal screw placement,loosening,and fracture.Addressing these issues,it requires a thorough investigation into the mechanical properties of screw reinsertion to optimize surgical procedures and enhance success rates and safety.OBJECTIVE:By combining finite element analysis with biomechanical experiments,this study aims to compare and analyze the mechanical performance of traditional trajectory pedicle screws during multiple extraction processes.The goal is to reveal patterns in screw extraction strength over repeated withdrawals,providing scientific insights into the safety and effectiveness of pedicle screw reinsertion for clinicians.METHODS:Based on CT scan data,a three-dimensional reconstruction of the L4 vertebra model was performed.Three-dimensional printing technology was used to create biological experimental samples.A pull-out experiment was conducted according to a screw placement plan.Utilizing CT data and standard pedicle screw parameters,a finite element model of the L4 vertebra and a pedicle screw model(diameter 6.0 mm,length 45 mm)were established.The model was divided into five operating conditions based on screw placement angle and cycles.A finite element model was developed to simulate axial pull-out testing,analyzing stress distribution in the vertebral body and maximum axial pull-out strength of the screw.Mechanics experimental results of three-dimensional printing were compared and analyzed against simulation outcomes.RESULTS AND CONCLUSION:(1)A dedicated experimental setup for pedicle screw extraction from single vertebrae was designed and constructed.(2)In the three-dimensional printing experiment,our groups of models were compared between correctly placed screws and once improperly placed screws.The correctly placed screws group exhibited a maximum pull-out force of(1 422.63±23.80)N.Furthermore,with increasing deviation angles in screw placement,the maximum pull-out forces of each group gradually decreased.(3)Comparing the condition of a single improper nail placement with repositioning the nail correctly,when the offset angle of the improper placement exceeded that of Model 3,correctly repositioning the nail helps to increase the screw's pull-out resistance.(4)Comparing the scenario of two consecutive improper nail placements with repositioning correctly after two improper placements,correctly repositioning the nail reduced the screw's pull-out resistance.Without replacing the screw,it was not advisable to attempt a third nail placement.(5)Experimental pull-out strength of three-dimensional printing correlates significantly with finite element simulation results,with a correlation coefficient of 0.98.There is no significant difference in the outcomes between the two methods(P＞0.05).

Objective To explore the biological functions and mechanisms of PIWI-interacting RNA(piRNA)in cervical cancer(CC).Methods RT-qPCR was used to detect the expression level of piRNA-2732 in CC tissue,CaSki cells and End1/E6E7 cells.EpiQuik m6A RNA methylation quantification kit was used to detect the methylation level of m6A RNA in CaSki cells.The expression levels of methyltransferases(METTL3,METTL14 and WTAP)and demethylases(FTO,ALKBH5)mRNA in CaSki cells were detected by RT-qPCR.After culturing CaSki cells to logarithmic growth stage,they were divided into six groups:piRNA-2732 mimic negative control group(mi-NC group),piRNA-2732 mimic group(mi-2732 group),piRNA-2732 inhibitor negative control group(in-NC group),piRNA-2732 inhibitor group(in-2732 group),piRNA-2732 mimic+METTL3 knockdown control group(mi-2732+si-NC group),and piRNA-2732 mimic+METTL3 knockdown group(mi-2732+si-METTL3 group).The viability of CaSki cells was detected by CCK8 assay.Colony formation assay was used to detect the proliferation ability of CaSki cells.Transwell experiment was used to detect the migration and invasion ability of CaSki cells.RT-qPCR and Western blot were used to detect the expression of methyltransferase like protein 3(METTL3).Transfected METTL3 wild-type(METTL3-WT)and METTL3 mutant(METTL3-MUT)in the mi-NC group,mi-2732 group,in-NC group,and in-2732 group respectively,and detected the effect of piRNA-2732 on METTL3 through dual luciferase reporter gene assay.Results Compared with the adjacent tissues,the expression of piRNA-2732(3.84±1.08 vs 1.32±0.53)was significantly higher in the cancer tissues of CC patients,and the difference was statistically significant(t=5.115,P<0.001).Compared with end1/E6E7 cells,the expression of piRNA-2732(1.00±0.13 vs 1.67±0.16)in CaSki cells was significantly higher,and the difference was statistically significant(t=5.632,P<0.01).Compared with mi-NC group,mi-2732 group promoted the viability,proliferation,migration and invasion of CaSki cells,and the differences were statistically significant(t=4.410～11.040,all P<0.01).Compared with mi-NC group,mi-2732 group increased m6A RNA methylation level and METTL3 mRNA and protein,the differences were statistically significant(t=6.176,9.211,12.550,all P<0.05).The results of dual luciferase reporter gene testing showed that compared with the mi-NC+METTL3-WT group,the relative luciferase activity of mi-2732+METTL3-WT group was significantly increased(t=11.850).Compared with mi-2732+METTL3-WT group,the relative luciferase activity of mi-2732+METTL3-MUT group was significantly lower(t=12.740),and the difference was statistically significant(all P<0.000 1).Compared with in NC+METTL3-WT group,the relative luciferase activity of in-2732+METTL3-WT group was significantly lower(t=7.828),compared with in-2732+METTL3-WT group,the relative luciferase activity of CaSki cells in in-2732+METTL3-MUT group was significantly increased(t=8.146),and the difference was statistically significant(all P<0.001).Compared with mi-2732+si-NC group,the expression level of m6A in mi-2732+si-METTL3 group was significantly lower,and the difference was statistically significant(t=7.630,P<0.01).Compared with mi-2732+si-NC group,the proliferation ability,colony number,cell migration and invasion ability of CaSki cells in mi-2732+si-METTL3 group were significantly decreased,and the differences were statistically significant(t=3.695～4.891,all P<0.001).Conclusion piRNA-2732 is overexpressed in CC tissues and cells,and piRNA-2732 promotes tumor development in CC through METTL3 mediated m6A methylation.

Objective:To establish a tumor tissue xenograft (PDX) model derived from liver cancer patients and explore the factors affecting tumorigenicity of liver cancer in the PDX model.Methods:The hepatocellular carcinoma tissues were inoculated subcutaneously in the axilla of NPG mice using the tissue block method to establish a PDX model. The demographic characteristics and related clinical examination data of 60 hepatocellular carcinoma patients were collected using the electronic medical record system and comprehensive medical information system of Beijing You'an Hospital, affiliated to Capital Medical University. The hepatocellular carcinoma samples of 24 cases were sequenced using the Oak Wing TM-808 gene detection reagent and high-throughput sequencing technology. SPSS 17.0 statistical software was used for statistical analysis, and the count data were analyzed using the χ2 test. Results:The tumorigenicity rate of PDX samples from 60 patients with liver cancer was 35% (21/60). The average tumorigenic duration in the PDX-P0 generation was 110.71±50.45 days. There were statistically significant differences ( P<0.05) corresponding to Edmondson grade ( χ2=5.910, P=0.015) and Ki67 expression ( χ2=4.615, P=0.032) among PDX with tumorigenicity and without tumorigenicity between the liver cancer samples. There was no statistically significant difference in gene mutation (TOP25) among PDX with tumorigenicity and without tumorigenicity between liver cancer samples. Conclusion:The factors affecting the tumorigenicity of liver cancer in PDX models are complex. The high pathological grade and strong Ki67 expression may be the key factors for the completion of liver cancer in PDX models.

Objective:To understand the current status of anemia, iron deficiency, and iron-deficiency anemia among preschool children in China.Methods:A cross-sectional study was conducted with a multi-stage stratified sampling method to select 150 streets or townships from 10 Chinese provinces, autonomous regions, or municipalities (East: Jiangsu, Zhejiang, Shandong, and Hainan; Central: Henan; West: Chongqing, Shaanxi, Guizhou, and Xinjiang; Northeast: Liaoning). From May 2022 to April 2023, a total of 21 470 children, including community-based children aged 0.5 to<3.0 years receiving child health care and kindergarten-based children aged 3.0 to<7.0 years, were surveyed. They were divided into 3 age groups: infants (0.5 to<1.0 year), toddlers (1.0 to<3.0 years), and preschoolers (3.0 to<7.0 years). Basic information such as sex and date of birth of the children was collected, and peripheral blood samples were obtained for routine blood tests and serum ferritin measurement. The prevalence rates of anemia, iron deficiency, and iron-deficiency anemia were analyzed, and the prevalence rate differences were compared among different ages, sex, urban and rural areas, and regions using the chi-square test.Results:A total of 21 460 valid responses were collected, including 10 780 boys (50.2%). The number of infants, toddlers, and preschoolers were 2 645 (12.3%), 6 244 (29.1%), and 12 571 (58.6%), respectively. The hemoglobin level was (126.7±14.8) g/L, and the serum ferritin level was 32.3 (18.5, 50.1) μg/L. The overall rates of anemia, iron deficiency, and iron-deficiency anemia were 10.4% (2 230/21 460), 28.3% (6 070/21 460), and 3.9% (845/21 460), respectively. The prevalence rate of anemia was higher for boys than for girls (10.9% (1 173/10 780) vs. 9.9% (1 057/10 680), χ2=5.58, P=0.018), with statistically significant differences in the rates for infants, toddlers and preschoolers (18.0% (475/2 645), 10.6% (662/6 244), and 8.7% (1 093/12 571), respectively, χ2=201.81, P<0.01), and the rate was significantly higher for children in rural than that in urban area (11.8% (1 516/12 883) vs. 8.3% (714/8 577), χ2=65.54, P<0.01), with statistically significant differences in the rates by region ( χ2=126.60, P<0.01), with the highest rate of 15.8% (343/2 173) for children in Central region, and the lowest rate of 5.3% (108/2 053) in Northeastern region. The prevalence rates of iron deficiency were 33.8% (895/2 645), 32.2% (2 011/6 244), and 25.2% (3 164/12 571) in infants, toddlers, and preschoolers, respectively, and 30.0% (3 229/10 780) in boys vs. 26.6% (2 841/10 680) in girls, 21.7% (1 913/8 821), 40.0% (870/2 173), 27.1% (2 283/8 413), 48.9% (1 004/2 053) in Eastern, Central, Western, and Northeastern regions, respectively, and each between-group showed a significant statistical difference ( χ2=147.71, 29.73, 773.02, all P<0.01). The prevalence rate of iron-deficiency anemia showed a significant statistical difference between urban and rural areas, 2.9% (251/8 577) vs. 4.6% (594/12 883) ( χ2=38.62, P<0.01), while the difference in iron deficiency prevalence was not significant ( χ2=0.51, P=0.476). Conclusions:There has been a notable improvement in iron deficiency and iron-deficiency anemia among preschool children in China, but the situation remains concerning. Particular attention should be paid to the prevention and control of iron deficiency and iron-deficiency anemia, especially among infants and children in the Central, Western, and Northeastern regions of China.

Objective:To explore and compare the image quality and radiation dose between the spiral scanning and the axial scanning for skull phantom based on specific conditions.Methods:The position of the orbitomeatal base line(OBL)of the skull phantom was marked,and the different angles of elevation of skull were adjusted.The angles between OBL and bed surface were respectively set as 90°,100°,110° and 120°.The axial scanning and spiral scanning were respective adopted to conduct 24 times of image acquisition when the computed tomography dose index(CTDIvol)of fixed volume were respectively 40,50 and 60 mGy.The cross section of axial scanning was vertical to OBL,and the images of spiral scanning used the reconstructed technique of image quality enhancement(IQE)of removing spiral artifacts to conduct reconstruction along the OBL direction.The CT value(HU)and standard deviation(SD)of the bilateral cerebellum,temporal lobe,frontal lobe and parietal lobe of the phantom were measured,and the signal-to-noise ratio(SNR)of each lobe of the phantom was calculated.The CTDIvol and dose-length product(DLP)were recorded,and the effective dose(ED)of lens was calculated.Results:The differences of the SNR values of cerebellum and occipital lobe(R),cerebellum and occipital lobe(L),temporal lobe(R),temporal lobe(L),frontal lobe(R),frontal lobe(L),parietal lobe(R)and parietal lobe(L)between two kinds of scanning models were significant(F=6.48,5.83,7.00,6.20,7.30,8.26,5.72,5.83,P<0.05),respectively.There was significant difference in lens DLP between the two kinds of scanning models(F=10.96,P<0.05).The spiral scanning and IQE reconstructed technique were used to conduct image acquisition and processing.The SNR value of spiral scanning imaging was better than that of axial scanning,and the reconstructions of coronal and sagittal positions could be conducted,and the radiation doses of lens were similar,but the DLP value of spiral scanning was slightly higher than that of axial scanning at the same CTDIvol.Conclusion:Using the IQE reconstruction technique of spiral scanning can obtain satisfactory CT sectional images of skull under the situations that machine cannot change scanning angle or the scanning of axial position is unable to conduct cooperation.