Objective: To establish a method for the determination of curcumine and berberine hydrochloride in Shangke Dieda paste. Methods:An HPLC method was adopted to determine the content of curcumine and berberine hydrochloride in Shangke Dieda paste. For curcumine, the column was InertSutain C18 (250 mm × 4. 6 mm,5 μm); the mobile phase was acetonitrile and 4% acetic acid solution (44 ∶56);the flow rate was 1. 0 ml·min-1;the column temperature was 25℃;the detection wavelength was 430 nm;the sample size was 10μl. For berberine hydrochloride, the column was InertSutain C18 (250 mm × 4. 6 mm,5μm);the mobile phase consisted of acetonitrile-0. 1% phosphoric acid (44 ∶56, 0. 2 g dodecyl sodium sulfate was added to 100 ml solution); the flow rate was 1. 0 ml·min-1;the column temperature was 25℃ ;the detection wavelength was 345 nm;the sample size was 10 μl. Results:A good linear correlation was obtained within the range of 0.01-0.50 μg (r =0.999 3) for curcumin and 0.02-0.16 μg(r =0. 999 9) for berberine hydrochloride. The average recovery was 101. 03% with RSD of 1. 75% for curcumin and 99. 20% with RSD of 0. 64% for berberine hydrochloride (n=9). Conclusion:The established method is simple, accurate, sensitive and specific, which can be used for the quality control of Shangke Dieda paste.

Objective To design and synthesize derivatives of wanpeinine A, the main steroidal alkaloid isolated from the plant Fritillaria shuchengensis, and further study on the structure-activity relationship of the steroidal alkaloid. Methods Acylation and alkylation were used to synthesize the derivatives and their structures were identified via NMR and MS.Results The acylation of wanpeinine A (1) produced 3β,6α-diacetylwanpeinine A (2), 3β,6α-dipropionylwanpeinine A (3), 3β,6α-dichloracetylwanpeinine A (4), 3β,6α-dibenzoylwanpeinine A (5), and 3β-methoxyacylwanpeinine A (6). The alkylation of wanpeinine A formed 3β,6α-dimethoxymethylwanpeinine A (7). Conclusion All compounds are new except for 3β,6α-diacetylwanpeinine A.

Objective To evaluate the diagnostic value and limits of 64-slice spiral coronary artery imaging,by com- parison with selective coronary angiography,in detection of coronary heart disease.Methods Fourty-two patients sus- pected CAD were performed 64-slice spiral CT coronary imaging and selective coronary artery angiography in two weeks, comparative analysis of results were progressed consequently.Results The sensitivity,specificity and positive and nega- tive predictive value to identify≥50% stenosis branches was 90.5%,96.6%,85.9% and 97.8%,respectively.The sen- sitivity,specificity and positive and negative predictive value to identify≥75% stenosis branches was 93.5%,98.9%, 87.9% and99.4%,respectively.Conclusion As a noinvasive quantitative assessment of coronary artery stenoses exami- nation,64-slice spiral CT is a valuable method to detect and diagnose the disease of coronary artery,but its clinical use maybe presently be limited due to image quality in a number of cases.

OBJECTIVE: To investigate the compatibility of hollow hydroxypropyl starch capsules with drug particles of ofloxacin. METHODS: The capsules were placed in conditions of high temperature of 40℃ or high humidity of (75 ± 5)% RH for 5 and 10 d, respectively. The contents and related substances were determined by high performance liquid chromatography (HPLC), and the changes in the drug appearance and colors were observed. RESULTS: After being stored under the conditions of high temperature and high humidity for 5 and 10 d, the contents of ofloxacin were in the range of 90% - 110%, and no new impurities were detected, which conformed to the quality standard of ofloxacin capsules in the Chinese Pharmacopoeia 2010 edition. CONCLUSION: There is good compatibility between ofloxacin and hollow hydroxypropyl starch capsules, which is consistent with the test results of gelatin capsules.

OBJECTIVE: To establish a method for determination of D(-) sulbenicillin sodium in sulbenicillin sodium for injection by HPLC/MS. METHODS: The analysis was performed on a SHIMADZU VP-ODS column with mobile phase consisting of 0.01 mol·L-1 ammonium acetate solution-methanol (90:10) at a flow rate of 0.6 mL·min-1. The detection was performed by Multiple Reaction Monitoring (MRM) scanning mode with ESI negative ion mode. RESULTS: D(-) and L(+) sulbenicillin could be effectively separated. Good liner relationship was achieved when the concentration of D(-) sulbenicillin was in the range of 1.03-51.90 μg· mL-1 (r = 0.9997). The average recovery rate was 99.98% at three levels (RSD = 0.30%, n = 9). CONCLUSION: The MRM method is accurate, reliable, and can be used for the determination of D(-) sulbenicillin sodium in sulbenicillin sodium for injection.

Middle East respiratory syndrome coronavirus (MERS-CoV) was identified as a novel human coronavirus and posed great threat to public health world wide,which calls for the development of effective and safe vaccine urgently. In the study, peptide epitopes tagrgeting spike antigen were predicted based on bioinformatics methods. Nine polypeptides with high scores were synthesized and linked to keyhole limpet hemocyanin (KLH). Female BALB/C mice were immunized with individual polypeptide-KLH, and the total IgG was detected by ELISA as well as the cellular mediated immunity (CMI) was analyzed using ELIs-pot assay. The results showed that an individual peptide of YVDVGPDSVKSACIEVDIQQTFFDKTWPRPIDVSKADGI could induce the highest level of total IgG as well as CMI (high frequency of IFN-γ secretion) against MERS-CoV antigen in mice. Our study identified a promising peptide vaccine candidate against MERS-CoV and provided an experimental support for bioinformatics-based design of peptide vaccine.
Animals ; Antibodies, Viral ; immunology ; Computational Biology ; Coronavirus Infections ; immunology ; prevention & control ; virology ; Female ; Humans ; Immunization ; Mice ; Mice, Inbred BALB C ; Middle East Respiratory Syndrome Coronavirus ; genetics ; immunology ; Peptides ; administration & dosage ; genetics ; immunology ; Spike Glycoprotein, Coronavirus ; administration & dosage ; genetics ; immunology ; Viral Vaccines ; administration & dosage ; genetics ; immunology

Objective To correlate between the IQQA(R)-Liver system in planning liver resection and the actual operation performed by surgeons.Methods The data on 65 patients were retrospectively studied.Their preoperative enhanced CT images were analyzed by the IQQA(R)-Liver system to determine the operative plan (Group Q) including the operative technique,the major vessels which required to be transected and the virtual liver resection volume.The above results and the corresponding data collected from the actual operation (Group S) were statistically analyzed to find out whether there was any correlation between them,thus determining the clinical significance of the IQQA(R)-Liver system in preoperative evaluation.Results Group Q and Group S had good correlation in the operative techniques (O) and in the major vessels that required to be transected (A) (uO =0.835,uA =0.893) with no statistical difference between the 2 groups (PO =0.494,PA =0.331).The virtual liver resection volume was 633.96 ± 512.06 (78.30 ～2 559.38)cm3.Conclusion Preoperative evaluation by the IQQA(R)-Liver system had significance in planning partial hepatectomy.

A hospital big data-based innovative diagnosis and treatment decision-making support model ( Info Button) was proposed for grass-root medical institutions in Sichuan Province in view of uneven distribution of its medical resources and of beingdifficult and expensive to see a doctoraccording to an analysis of the major health information projects and health information management.How to construct the model was elaborated with its problems pointed out.

al from abroad, which have no reports in China. METHODS: The dissection of flexor policis longus tendon and flexor policis brevis muscle and the medial and extensor halucis longus, flexor policis longus, adductor muscle and abductor halucis muscle cross head and oblique head, medial and lateral head of flexor policis brevis muscle and flexor halucis longus tendon and the extensor halucis longus tendon. These parameters included length, width, thickness, cross-sectional area, lateral heads, extensor halucis longus muscle and tendon and the transverse head of adductor policis muscle and the oblique head, abductor policis brevis from the left leg and foot of fresh female specimens was performed. The cross-sectional area and length located in a fixture were measured and calculated for each sample. Sample loading was done, and one sample was measured four times to gather strength limit, maximum load data, and the load displacement curve. According to Hooke’s law, the elastic modulus of each specimen was calculated. al from abroad, which have no reports in China. METHODS: The dissection of flexor policis longus tendon and flexor policis brevis muscle and the medial and extensor halucis longus, flexor policis longus, adductor muscle and abductor halucis muscle cross head and oblique head, medial and lateral head of flexor policis brevis muscle and flexor halucis longus tendon and the extensor halucis longus tendon. These parameters included length, width, thickness, cross-sectional area, lateral heads, extensor halucis longus muscle and tendon and the transverse head of adductor policis muscle and the oblique head, abductor policis brevis from the left leg and foot of fresh female specimens was performed. The cross-sectional area and length located in a fixture were measured and calculated for each sample. Sample loading was done, and one sample was measured four times to gather strength limit, maximum load data, and the load displacement curve. According to Hooke’s law, the elastic modulus of each specimen was calculated. Abstract BACKGROUND:Currently, the material parameters of foot three-dimensional finite element models are almost OBJECTIVE:To preliminarily measure the parameters of foot muscle and tendon materials in Chinese people. RESULTS AND CONCLUSION: Relevant measurement data were harvested from nine samples, including the maximum loading, ultimate strength and elastic modulus test.

The objective of this study is to generate broad spectrum monoclonal antibody ( mAb ) against a group of pyrethroid insecticides and to identify its immunological characteristics. The generic hapten 3-phenoxy-benzoic acid ( PBA) was conjugated to carrier protein BSA by activated ester method. Balb/c mice were immunized with PBA-BSA. The titer of polyclonal antibody ( pAb ) was detected by indirect enzyme-linked immunosorbent assay ( ELISA) after five times immunization. The mouse with high titer and sensitivity was selected for cell fusing. The splenocytes of immunized mice were fused with Sp2/0 cells and the cultural supernatants of hybridoma cells were screened by indirect non-competitive ELISA based on the coating antigen PBA-ovoalbumin ( PBA-OVA ) . High-sensitivity and high-specificity mAb was prepared after subcloning using limiting dilution method. Purified mAb was obtained after purified by saturated ammonia sulfate precipitation and protein G affinity column. The immunological characteristics of mAb such as titer, antibody subtypes, affinity constant and the sensitivity to pyrethroid insecticides were characterized by indirect ELISA; The results of UV spectroscopy and SDS-PAGE showed that PBA-BSA artificial antigen was synthesized successfully. A hybridoma cell line (4H11) secreting anti-pyrethroid mAb was established. The titre of ascites was up to 1:6. 5×106, and the mAb was IgG1 subtype. The affinity constant of the mAb to PBA was about 2. 5×107 L/mol, with a IC50 value of 208. 83 μg/L and a detection limit of 21. 23 μg/L to PBA. Simultaneously, beta-cypermethrin, flucythrinate, cypermethrin and fenvalerate were sensitively recognized by the mAb with the IC50 of 1. 01, 2. 15, 3. 16 and 3. 67μg/L, respectively.