Objective The aim of the study is to analyze the incidence patterns and epidemiological characteristics of parasitic and vector-borne diseases in the Minhang and Jinshan districts of Shanghai, and provide evidence-based information for optimizing prevention and control measures. Methods We collected information from epidemic reports and epidemiological investigation forms for cases of parasitic and vector-borne diseases from 2005 to 2024 in Shanghai's Minhang and Jinshan districts. Descriptive epidemiological method were adopted to conduct a comparative analysis of incidence trends, epidemic characteristics, and infection sources. Results A total of 229 cases in 7 categories were reported between 2005 and 2024, with an average annual incidence rate of 0.36/100 000. The average annual incidence rate in Minhang District was significantly higher than that in Jinshan District. The most prevalent diseases were malaria and dengue fever, followed by Japanese encephalitis. Monthly case reports were available, predominantly from June to October, with a peak in July-August. A statistically significant difference was observed between the two districts in case distribution during June-October (P＜0.001), whereas no significant difference was found for July-August (P=0.331). The majority of cases were young men (111/229,48.47%), aged 20-39 years. Migrant workers/farmers constituted the largest occupational group (55/229, 24.02%). Registered residents of other provinces and cities (147/229,64.19%), and the main source of infection was overseas importation (112/229,48.91%). There were no statistically significant differences in gender and household-registration composition between the two districts (P＞0.05). Significant differences existed in age, occupation, and source of infection (P＜0.05). The imported diseases were malaria and dengue fever, with Africa and Southeast Asia being the primary source locations. Malaria was the predominant disease imported from other provinces and cities, with cases having been imported from abroad since 2012. Local infections were mainly Japanese encephalitis, followed by malaria (with the last local case reported in 2010). Cases between 2005 and 2009 were predominantly imported from other provinces and cities. The proportion of cases imported from abroad increased sharply after 2010, particularly in Minhang District. Local infections sometimes arise in Jinshan District, with Japanese encephalitis serving as the primary type. Conclusions Incidence rates of parasitic and vector-borne diseases in Minhang and Jinshan districts have generally remained low. To further reduce this disease burden, it will be necessary to strengthen joint measures for prevention and control, eliminate the environmental risk factors of vector organisms, enhance monitoring and precise control of the environment and inbound personnel to prevent the occurrence and transmission of parasitic and vector-borne diseases.

This consensus was developed by the Orthodontic Society of the Chinese Stomatological Association to provide a systematic, scientific, and practical guideline for informed consent in orthodontic care. Orthodontic treatment is typically lengthy, highly individualized, and involves multiple factors such as growth and development, occlusal function, and facial esthetics. Rapid technological advances and diverse risk profiles make the traditional reliance on orthodontist experience or institutional templates insufficient to ensure patients′ full understanding and autonomous decision-making. To address this, the expert panel conducted extensive reviews of domestic and international guidelines, analyzed representative dispute cases, and performed multicenter patient-clinician surveys. Using a multi-round Delphi method, the group established a standardized informed consent framework covering the initial consultation, treatment, and retention phases. The consensus emphasizes that informed consent is not only a fundamental legal and ethical requirement but also a key step in building trust, improving patient compliance, and enhancing treatment satisfaction. Orthodontists should clearly and comprehensively explain treatment plans, potential risks, uncertainties, and associated costs, while respecting the autonomy of patients or guardians, and maintain continuous communication and dynamic evaluation throughout the treatment process. The release of this consensus provides unified and authoritative guidance for clinical orthodontics, helping to standardize informed consent, enhance its transparency, safeguard patient rights, reduce medical risks, and promote high-quality, sustainable development of orthodontic practice.

Poly(lactic-co-glycolide)(PLGA)is a key excipient in long-acting sustained-release preparations,and its degradation properties directly affect the drug release behavior.In this study,PLGA microspheres were prepared by microfluidic techniques,and the morphology changes of the microspheres were observed by scanning electron microscopy(SEM).In alkaline environment,due to the accelerated hydrolysis of ester bonds,the surface of the microspheres was rapidly dissolved and eroded,and the degradation rate was significantly higher than that in acidic environment.High temperature accelerated the degradation of PLGA microspheres.Under neutral and alkaline conditions,the microspheres showed aggregation and adhesion.Under acidic conditions,the microspheres gradually decomposed into irregular fragments.The high ionic strength further promoted the surface corrosion of the microspheres,especially under extreme pH conditions.Simultaneously,PLGA microspheres encapsulating coumarin were prepared to simulate the microsphere formulation.The release rate of coumarin after degradation of the microspheres under different conditions was observed by measuring the absorbance with ultraviolet-visible spectrophotometry.The results were consistent with those of the blank microspheres.This study revealed that the degradation of PLGA microspheres was significantly pH-dependent,temperature sensitive and ion strength responsive.These findings not only helped to understand and optimize the long-term stability and controlled release performance of drug-carrying microspheres,but also provided a theoretical basis for further improvement of PLGA-based drug carrier design.

This research investigated the contamination level,distribution of drug-resistant strains,and molecular epidemiologi-cal characteristics of Campylobacter,and further explored transmission pathways and prevention strategies.Cecum,chicken carcass,chicken product,and environmental samples,as well as swabs from workers'hands,were collected from a slaughterhouse in a large broiler group in the Jiaodong area between August 2023 and July 2024.Quantitative contamination assessment of Campylobacter in chicken carcasses and chicken products was performed.After microbial mass spectrometry identification,the representative strains of different links were selected for drug resistance testing and whole genome sequencing(WGS).On the basis of the sequencing results,the resistance genes,virulence genes,multilocus sequence typing(MLST),and phylogenetic characteristics of representative strains were analyzed.Homology comparisons were performed between isolates and strains from patients with diarrhea in the NCBI database.A total of 297 Campylobacter strains were isolated from 806 samples,and the overall detection rate was 36.85%.The detection rate of Campylobacter was highest in the evisceration process(47.33%),followed by the cutting process(35.64%).Overall,the Campylo-bacter detection rate first increased,then decreased,and subsequently increased.Drug sensitivity testing revealed that 90 isolates were resistant to nalidixic acid and ciprofloxacin,and 94.97%of isolates were resistant to tetracycline.WGS showed that both Campylo-bacter jejuni(C.jejuni)and Campylobacter coli(C.coli)carried many drug resistance and virulence genes.ST-14176 of C.jejuni was isolated for the first time herein.The predominant ST-8261 strain of C.jejuni and ST-860,ST-829,and ST-1586 strains of C.coli are known to cause human diarrhea.LOS expression genes associated with Guillain-Barré syndrome(GBS)were detected in both C.jejuni isolates from the slaughter chain and patients with GBS.Some strains exhibited close genetic relatedness to human-derived Campylo-bacter strains from the NCBI database.The detection rate of Campylobacter in the slaughterhouse first increased,then decreased,and subsequently increased,and the quantitative contamination level of each link was similar to the detection rate.Quantitative analysis of chicken carcasses/products revealed that the average bacterial load was highest in eviscerated carcasses(102.80 cfu/g),and the high-est amount of Campylobacter in chicken products reached 451.80 cfu/g.Abundant drug resistance genes and virulence genes were iden-tified,and the drug resistance genes were highly correlated with the drug resistance rate.Therefore,surveillance intensity and control measures for Campylobacter in slaughter processes should be strengthened.

This consensus was developed by the Orthodontic Society of the Chinese Stomatological Association to provide a systematic, scientific, and practical guideline for informed consent in orthodontic care. Orthodontic treatment is typically lengthy, highly individualized, and involves multiple factors such as growth and development, occlusal function, and facial esthetics. Rapid technological advances and diverse risk profiles make the traditional reliance on orthodontist experience or institutional templates insufficient to ensure patients′ full understanding and autonomous decision-making. To address this, the expert panel conducted extensive reviews of domestic and international guidelines, analyzed representative dispute cases, and performed multicenter patient-clinician surveys. Using a multi-round Delphi method, the group established a standardized informed consent framework covering the initial consultation, treatment, and retention phases. The consensus emphasizes that informed consent is not only a fundamental legal and ethical requirement but also a key step in building trust, improving patient compliance, and enhancing treatment satisfaction. Orthodontists should clearly and comprehensively explain treatment plans, potential risks, uncertainties, and associated costs, while respecting the autonomy of patients or guardians, and maintain continuous communication and dynamic evaluation throughout the treatment process. The release of this consensus provides unified and authoritative guidance for clinical orthodontics, helping to standardize informed consent, enhance its transparency, safeguard patient rights, reduce medical risks, and promote high-quality, sustainable development of orthodontic practice.

This research investigated the contamination level,distribution of drug-resistant strains,and molecular epidemiologi-cal characteristics of Campylobacter,and further explored transmission pathways and prevention strategies.Cecum,chicken carcass,chicken product,and environmental samples,as well as swabs from workers'hands,were collected from a slaughterhouse in a large broiler group in the Jiaodong area between August 2023 and July 2024.Quantitative contamination assessment of Campylobacter in chicken carcasses and chicken products was performed.After microbial mass spectrometry identification,the representative strains of different links were selected for drug resistance testing and whole genome sequencing(WGS).On the basis of the sequencing results,the resistance genes,virulence genes,multilocus sequence typing(MLST),and phylogenetic characteristics of representative strains were analyzed.Homology comparisons were performed between isolates and strains from patients with diarrhea in the NCBI database.A total of 297 Campylobacter strains were isolated from 806 samples,and the overall detection rate was 36.85%.The detection rate of Campylobacter was highest in the evisceration process(47.33%),followed by the cutting process(35.64%).Overall,the Campylo-bacter detection rate first increased,then decreased,and subsequently increased.Drug sensitivity testing revealed that 90 isolates were resistant to nalidixic acid and ciprofloxacin,and 94.97%of isolates were resistant to tetracycline.WGS showed that both Campylo-bacter jejuni(C.jejuni)and Campylobacter coli(C.coli)carried many drug resistance and virulence genes.ST-14176 of C.jejuni was isolated for the first time herein.The predominant ST-8261 strain of C.jejuni and ST-860,ST-829,and ST-1586 strains of C.coli are known to cause human diarrhea.LOS expression genes associated with Guillain-Barré syndrome(GBS)were detected in both C.jejuni isolates from the slaughter chain and patients with GBS.Some strains exhibited close genetic relatedness to human-derived Campylo-bacter strains from the NCBI database.The detection rate of Campylobacter in the slaughterhouse first increased,then decreased,and subsequently increased,and the quantitative contamination level of each link was similar to the detection rate.Quantitative analysis of chicken carcasses/products revealed that the average bacterial load was highest in eviscerated carcasses(102.80 cfu/g),and the high-est amount of Campylobacter in chicken products reached 451.80 cfu/g.Abundant drug resistance genes and virulence genes were iden-tified,and the drug resistance genes were highly correlated with the drug resistance rate.Therefore,surveillance intensity and control measures for Campylobacter in slaughter processes should be strengthened.

Objective:To improve the understanding of patients with diffuse large B-cell lymphoma (DLBCL) with pulmonary cryptococcosis.Methods:The clinical data of 1 DLBCL patient with pulmonary cryptococcosis in the Central Hospital of Fengxian District of Shanghai in May 2023 were retrospectively analyzed, and the relevant literatures were reviewed.Results:This 75-year-old female patient was asymptomatic after 2 cycles of R-CHOP chemotherapy. The high-resolution CT of lung showed that lung nodules were progressively enlarged. Antibacterial treatment was ineffective. Pulmonary cryptococcosis was confirmed by bronchoalveolar lavage fluid (BALF) targeted high-throughput sequencing (tNGS) and cryptococcus capsular antigen (CrAg) detection. The central nervous system was not involved. And the long-term adequate-dose fluconazole was prescribed for 6 months, and the treatment against lymphoma was given synchronously. The lung nodule lesions reduced after antifungal therapy for 1 month. The lung nodules disappeared after the follow-up of 6 months after completion of final chemotherapy. The evaluation of lymphoma indicated complete remission.Conclusions:Pulmonary cryptococcosis occurs insidiously and shows no specific symptoms; its imaging manifestations are variable and routine anti-infection is ineffective. Immunochemotherapy for lymphoma patients is a high-risk factor for cryptococcal infection. tNGS and CrAg testing for BALF are effective methods of the confirmed diagnosis. The early and long-term adequate-dose antifungal treatment is the key to preventing the recurrence or progression.

To explore the role of the "Clinical Practice Guidelines" column and others in the Medical Joumnal of Peking Union Medical College Hospital (Med J PUMCH) in promoting diseiplinary development.

The prevalence of Class III malocclusion varies among different countries and regions. The populations from Southeast Asian countries (Chinese and Malaysian) showed the highest prevalence rate of 15.8%, which can seriously affect oral function, facial appearance, and mental health. As anterior crossbite tends to worsen with growth, early orthodontic treatment can harness growth potential to normalize maxillofacial development or reduce skeletal malformation severity, thereby reducing the difficulty and shortening the treatment cycle of later-stage treatment. This is beneficial for the physical and mental growth of children. Therefore, early orthodontic treatment for Class III malocclusion is particularly important. Determining the optimal timing for early orthodontic treatment requires a comprehensive assessment of clinical manifestations, dental age, and skeletal age, and can lead to better results with less effort. Currently, standardized treatment guidelines for early orthodontic treatment of Class III malocclusion are lacking. This review provides a comprehensive summary of the etiology, clinical manifestations, classification, and early orthodontic techniques for Class III malocclusion, along with systematic discussions on selecting early treatment plans. The purpose of this expert consensus is to standardize clinical practices and improve the treatment outcomes of Class III malocclusion through early orthodontic treatment.
Humans ; Malocclusion, Angle Class III/classification* ; Orthodontics, Corrective/methods* ; Consensus ; Child

Objective To design an 8-channel gene analyzer to take the place of the widely used gene analyzer with problems in inconvenient consumable replacement and short storage time of electrophoresis polymer.Methods The 8-channel gene analyzer had its mechanical components composed of an automatic sample loading table,a polymer injection module,a high-voltage temperature control module,an optical module and an integrated U box,its electrical control system made up of a host computer(an embedded computer)and three slave computers(a sampling control board,a polymer injection control board and a high-voltage temperature control board).The automatic sample loading table involved in four motors and transmission systems for x,y,z directions and optical alignment,the transmission systems adopted mainly belt drive mode and the optical alignment motor had its threads with an anti-backlash structure;the polymer injuection module was manipulated by the polymer injection control board,and the polymer block was made of highly transparent acrylic material;the high-voltage temperature control module realized the regulation of electrophoresis voltage and the detection of electrophoresis current by the low-ripple precision high-voltage power supply,and controlled the temperature of the heating furnace by the proportional-integral-differential(PID)algorithm;the optical module consisted of an excitation module and a light-receiving module,which had the base of the reflector made of low expansion coefficient alloy material;the integrated U box had the electrophoresis polymer,capillary array,polymer block and anode buffer in a plastic housing;the host computer had the data acquisition software programmed with C# and C++,and the slave computers were controlled by STM32 SCM.Results The 8-channel gene analyzer had no significant differences with the widely used ABI3500 gene analyzer in resolution,precision accuracy and clinical results.Conclusion The 8-channel gene analyzer gains advantages in consumable replacement and storage time of electrophoresis polymer,and can meet the requirements for gene sequencing.[Chinese Medical Equipment Journal,2025,46(2):24-30]