PURPOSE: This study was performed to evaluate the effect of changing the orientation of a reconstructed image on the accuracy of linear measurements using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Forty-two titanium pins were inserted in seven dry sheep mandibles. The length of these pins was measured using a digital caliper with readability of 0.01 mm. Mandibles were radiographed using a CBCT device. When the CBCT images were reconstructed, the orientation of slices was adjusted to parallel (i.e., 0degrees), +10degrees, +12degrees, -12degrees, and -10degrees with respect to the occlusal plane. The length of the pins was measured by three radiologists, and the accuracy of these measurements was reported using descriptive statistics and one-way analysis of variance (ANOVA); p<0.05 was considered statistically significant. RESULTS: The differences in radiographic measurements ranged from -0.64 to +0.06 at the orientation of -12degrees, -0.66 to -0.11 at -10degrees, -0.51 to +0.19 at 0degrees, -0.64 to +0.08 at +10degrees, and -0.64 to +0.1 at +12degrees. The mean absolute values of the errors were greater at negative orientations than at the parallel position or at positive orientations. The observers underestimated most of the variables by 0.5-0.1 mm (83.6%). In the second set of observations, the reproducibility at all orientations was greater than 0.9. CONCLUSION: Changing the slice orientation in the range of -12degrees to +12degrees reduced the accuracy of linear measurements obtained using CBCT. However, the error value was smaller than 0.5 mm and was, therefore, clinically acceptable.
Comprehension ; Cone-Beam Computed Tomography* ; Dental Implants ; Dental Occlusion ; Dimensional Measurement Accuracy ; Mandible ; Sheep ; Titanium