No abstract available.
Crowns* ; Dental Porcelain*

No abstract available.
Adult* ; Anatomic Landmarks* ; Humans ; Vertical Dimension*

STATEMENT OF PROBLEM: The aim of this study was to study the effects of various surface treatments to a titanium surface on the expression of Runx2 in vitro. MATERIAL AND METHODS: Human Osteosarcoma TE-85 cells were cultured on machined, sandblasted, or anodic oxidized cpTi discs. At various times of incubation, the cells were collected and then processed for the analysis of mRNA expression of Runx2 using reverse transcription-PCR. RESULTS: The expression pattern of Runx2 mRNA was differed according to the types of surface treatment. When the cells were cultured on the untreated control culture plates, the gene expression of Runx2 was not increased during the experiments. In the case of that the cells were cultured on the machined cpTI discs, the expression level was intermediate at the first day, but increased constitutively to day 5. In cells on sandblasted cpTi discs, the expression level was highest in the first day sample and the level was maintained to 5 days. In cells on anodized cpTi discs, the expression level increased rapidly to 3 days, but decreased slightly in the 5-th day sample. CONCLUSION: Different surface treatments may contribute to the regulation of osteoblast function by influencing the level of gene expression of key osteogenic factors.
Durapatite ; Gene Expression ; Humans ; Osteoblasts ; Osteogenesis ; Osteosarcoma ; RNA, Messenger ; Titanium

BACKGROUND: In order to restore severely attrited teeth properly, surgical intervention in the form of a crown-lengthening procedure may be required. And also, proper diagnosis and treatment sequencing is critical to obtain a successful results. Adequate diagnostic wax-up ensures good esthetics and healthy periodontal tissue. CASE DESCRIPTION: This clinical case report describes a diagnostically based protocol for restoration on mandibular anterior teeth with crown lengthening procedure and the treatment of partially edentulous mandible combined with an edentulous maxilla. In addition, the effort to prevent the combination syndrome was described. CLINICAL IMPLICATION: An interdisciplinary diagnosis and examination through visualization of the desired results ensure conservative and more predictable outcome.
Crown Lengthening ; Crowns ; Dietary Sucrose ; Esthetics ; Humans ; Mandible ; Maxilla ; Mouth ; Mouth Rehabilitation ; Tooth

BACKGROUND: Though implant dentistry is very successful and predictable in treatment of patients with destroyed dentition, there are some cases with limitations to implant therapy. In these cases, alternative treatment modality should be considered. CASE DESCRIPTION: A patient with destroyed dentition was rehabilitated with a lateral rotational path removable partial denture. According to the diagnosis, we determined to raise vertical dimension for esthetic and functional restoration. The final restoration was performed after four months of provisional period. CLINICAL IMPLICATION: The edentulous patients with compromised esthetics and functions can be successfully treated with a rotational path removable partial denture through adequate treatment planning and precise laboratory procedure.
Dentistry ; Dentition ; Denture, Partial, Removable ; Esthetics ; Humans ; Mouth ; Mouth Rehabilitation ; Tooth Attrition ; Vertical Dimension

STATEMENT OF PROBLEM: While patient-centered outcomes are usually not reported, these may represent major aspects of the implant success for the patient. Use of a well-designed patient survey form can be an invaluable asset to the implant practitioners. PURPOSE: The objective of this study was to investigate patient satisfaction after implant therapy by means of a questionnaire. MATERIAL AND METHODS: South Korean patients (n = 100), who visited the dental examination center of Soon Chun Hyang university hospital, were asked to fill out the satisfaction questionnaire regarding aspects of cost, comfort, esthetics, chewing, gingival health, food impaction, phonetic aspect, screw loosening, and general satisfaction. Responses to statements were given on the Likert response scale. Four experimental groups of patients were distinguished with various location (A1, A2, A3), year (B1, B2, B3), number of implant replacements (C1, C2, C3), and treatment cost (D1, D2, D3). The reliability of the response scales was measured by calculation of its internal consistency, expressed as Cronbach's alpha. The scales were distinguished by means of factor analysis method. Possible differences in scale scores among the groups were assessed by One-way ANOVA (alpha = 0.05). RESULTS: Patients responded to most of the statements with high satisfaction. But the mean scale score of statement about cost was low. After the verification of internal consistency and factor analysis, five components, e.g. general satisfaction, comfort, chewing efficiency, esthetics, and phonetic aspect were grouped together. These components could be explained with common meaning and the first factor was named as 'general satisfaction' . Differences in patient satisfaction on the scale with esthetics were present between patients who have been wearing the implant prosthesis less than three years and those more than seven years (B1 < B3). CONCLUSION: The patients were generally satisfied with the outcome of implant treatment. But the patients' major complaint was high cost and while the statistically significant difference was not shown, the satisfaction scale about food impaction and esthetics was low. So the continuing efforts to make improvements about these problems are needed for the implant practitioners.
Dental Implants ; Esthetics ; Factor Analysis, Statistical ; Health Care Costs ; Humans ; Mastication ; Patient Satisfaction ; Prostheses and Implants ; Surveys and Questionnaires ; Weights and Measures

The use of pure titanium and titanium alloys have been increased recently in fixed, removable prosthodontics and implant fields as a framework. But when they were used for superstructures of implant of metal framework of removable prosthesis, welding is necessary to reconnect the fracture site to control the casting distortions. To overcome the difficulties in soldering the titanium due to high oxidation property, much effort have been devoted. In this study, some of mechanical properties were compared between pure titanium and Ti-6Al-4V alloy by usingl aser welding, electron beam welding technique and tungsten arc welding. Mechanical properties such as tensile strength, yield strength, elongation and microhardness were measured. And, in order to compare the effect of welding site and surrounding metal tissue according to the welding condition, SEM photographs were taken an element distribution was observed by Wave Dispersion Spectroscopy. Through analyses of the data, following results were obtained; 1. In items such as tensile strength, yield strength and elongation according to the welding techniques of pure titanium, only tungsten arc welded group showed significant lower value than other groups(P<0.05). 2. In items such as tensile strength and yield strength according to the welding techniques of Ti-6Al-4V alloy, control group and tungsten arc welded group showed significant difference among all the groups(P<0.05). 3. Ti-6Al-4V alloy exhibited significantly greater elongation than control group when the laser welding method and electron beam welding method were used, and elongation showed increasing tendency. 4. Pure titanium specimens exhibited increasing tendency of microhardness regardless of the welding technique applied, and especially tungsten arc welded group demonstrated a great increase of microhardness than parent metal. 5. There was no hardness change in laser welded group and electron bean welded group of Ti-6Al-4V ally, but in tungsten arc welded group, hardness changed greatly from parent metal to weld seam. 6. Through the metallographic examination and scanning electron microscopy, laser welding caused central fusion and recristallizations were formed and tungsten arc welding caused localized fusion to 0.3-0.7mm from the surface.
Alloys ; Hardness ; Humans ; Microscopy, Electron, Scanning ; Parents ; Prostheses and Implants ; Prosthodontics ; Spectrum Analysis ; Tensile Strength ; Titanium* ; Tungsten ; Welding*

STATEMENT OF PROBLEM: Resonance frequency analysis has been increasingly served as a noninvasive and objective method for clinical monitoring of implant stability. Many clinical studies must be required for standardized data using RFA. PURPOSE: This study was performed to evaluate RFA value changes in two anodized implant groups. MATERIAL AND METHOD: Among a total of 24 implants, twelve screw shaped implants as a test group (H2-R8.5) were manufactured, which had a pitch-height of 0.4 mm, an outer diameter of 4.3 mm, a length of 8.5 mm, and external hexa-headed, were turned from 5 mm rods of commercially pure titanium (ASTM Grade IV, Warantec Co., Seoul, Korea), and another twelve implants as a control group were Branemark Ti-Unite MK4 (diameter 4.0 mm, length 8.5 mm). Each group was installed in tibia of rabbit. Two implants were placed in each tibia (four implants per rabbit). Test two implants were inserted in right side and control two in left side. ISQ values were measured using Osstell(TM) (Integration Diagnostics Ltd. Sweden) during fixture installation, and 12 weeks later and evaluated the RFA changes. RESULTS: Mean and SD of baseline ISQ values of test group were 75.0 +/- 3.4 and 68.7 +/- 8.1 for control group. Mean and SD of ISQ values 12 weeks after implant insertion were 73.2 +/- 4.7 for test group and 72.6 +/- 3.9 for control group. There were no statistically significant differences between groups in ISQ values after 3months (P>0.05). From the data, RFA gains after 3 months were calculated, and there was statistically significant difference between groups (P<0.05). CONCLUSION: Although there were RFA changes between groups, implant stability after experimental period shows alike tendency and good bone responses.
Seoul ; Tibia ; Titanium

BACKGROUND: Both atrophic gastritis and intestinal metaplasia may progress to gastric dysplasia. This study aimed to analyze the factors influencing progression of atrophic gastritis and intestinal metaplasia to dysplasia. METHODS: People diagnosed with atrophic gastritis and intestinal metaplasia for the first time received a follow-up endoscopy and were investigated for the cumulative incidence rate of gastric dysplasia by age, gender, smoking habit, alcohol intake, rice consumption and family history of stomach cancer. RESULTS: The cumulative incidence rate increased with age, consuming > or =3 bowls of rice per day and family history of stomach cancer. Multivariate analysis showed that the cumulative incidence rate of gastric dysplasia increased in subjects >61 years (RR=2.54, P=0.014), in those consuming > or =3 bowls of rice per day (RR=1.46, P=0.021) and in those with a family history of stomach cancer (RR=1.31, P=0.037). CONCLUSIONS: More active management, such as intensive endoscopic follow-up examinations, lifestyle change and education regarding gastric dysplasia, are required in those older than 61 years, having a higher intake of grain or with a family history of stomach cancer.
Edible Grain ; Endoscopy ; Follow-Up Studies ; Gastritis, Atrophic ; Humans ; Incidence ; Life Style ; Metaplasia ; Multivariate Analysis ; Risk Factors ; Smoke ; Smoking ; Stomach ; Stomach Neoplasms

The study of bacteriophage began by F.W. Twort in 1915 and the lytic cycle recognized by d'Herellel in 1917. It repeated about the marine bacteriophage containing Vibrio phage by Smith, Spencer and Ju. Authors isolated 2 virulent phages for the pathogenic V. alginolyticus from marine products. These 2 phages were examined their ultrastructure & host-infection by elecron microscopy and in vivo test using skin of rats. V. alginolyticus phages(VAPs) fomed plaques about 0.5 - 0.9mm in diameter and bands 50 - 60% in sucrose density gradient. VAP had 50 - 120nm tail and 40 - 90nm head in diameter. In vivo test, using rat skin, as well as in vitro test VAP had the activity to V. alginolyticus isolated.
Animals ; Bacteriophages* ; Coriolaceae ; Head ; Microscopy ; Rats ; Skin ; Sucrose ; Tail ; Vibrio alginolyticus* ; Vibrio*