A case of prune belly syndrome, which was observed in a 3 month-old male, is presented. The congenital anomaly complex in which absence of abdominal muscle is associated with urinary tract abnormalities and abdominal testes has been well known. The literature is reviewed briefly.
Abdominal Muscles ; Humans ; Infant ; Male ; Prune Belly Syndrome* ; Testis ; Urinary Tract

In an attempt to obtain evidence in the mechanism of stone formation, the effectiveness of Amiloride. a K-sparing diuretic known to act on the distal nephron. on the kidney with oxamide-induced urolithiasis was investigated. Futhermore. the influence of stone formation on the distribution of intrarenal blood flow and the effect of Amiloride on them were also studied. Most prominent derangements of renal function observed during stone formation were decreases of both C(PAH) and C(cr) indicating the curtailment in renal hemodynamics. The oxamide-treated kidney also responded to Amiloride with typical natriuresis and antikaluresis. in the same fashion with normal kidneys. The experiments in which the intrarenal blood flow distribution was measured by PAH-extraction technique raveled that mainly the cortical blood flow was curtailed, whereas non-cortical blood flow (medullary flow) did not change during oxamide-stone formation. Amiloride did not influence the intrarenal b100d flow distribution both in normal and oxamide kidneys. These observations suggest that oxamide-stone formation was initiated not by tubular necrosis produced by the toxic action of oxalate on the tubules, but rather by mechanical obstruction of the tubules.
Amiloride* ; Hemodynamics ; Kidney* ; Natriuresis ; Necrosis ; Nephrons ; Renal Circulation ; Urolithiasis

PURPOSE: This study was to evaluate the effect of rinsing time on the accuracy of interim crowns fabricated by digital light processing. MATERIALS AND METHODS: The maxillary right first molar master die was duplicated using a silicone material, while a study die was produced using epoxy resin. Scans of the epoxy resin die were used in combination with CAD software to design a maxillary right first molar interim crown. Based on this design, 24 interim crowns were fabricated with digital light processing. This study examined the trueness and precision of products that were processed with one of the three different postprocessing rinsing times (1 min, 5 min, and 10 min). Trueness was measured by superimposing reference data with scanned data from external, intaglio, and marginal surfaces. Precision was measured by superimposing the scan data within the group. The trueness and precision data were analyzed using KruskalWallis, nonparametric, and post-hoc tests, and were compared using a MannWhitney U test with Bonferroni correction (α=.05). RESULTS: The trueness of the external and intaglio surfaces of crowns varied significantly among the different rinsing times (P=.004, P=.003), but there was no statistically significant difference in terms of trueness measurements of the marginal surfaces (P=.605). In terms of precision, statistically significant differences were found among the external, intaglio, and marginal surfaces (P=.001). CONCLUSION Interim crowns rinsed for 10 minutes showed high accuracy.

PURPOSE: To compare and analyze trueness and precision of provisional crowns made using stereolithography apparatus and subtractive technology. MATERIALS AND METHODS: Digital impressions were made using a master model and an intraoral scanner and the crowns were designed with CAD software; in total, 22 crowns were produced. After superimposing CAD design data and scan data using a 3D program, quantitative and qualitative data were obtained for analysis of trueness and precision. Statistical analysis was performed using normality test combined with Levene test for equal variance analysis and independent sample t-test. Type 1 error was set at 0.05. RESULTS: Trueness for the outer and inner surfaces of the SLA crown (SLAC) were 49.6±9.3 µm and 22.5±5.1 µm, respectively, and those of the subtractive crown (SUBC) were 31.8±7.5 µm and 14.6±1.2 µm, respectively. Precision values for the outer and inner surfaces of the SLAC were 18.7±6.2 µm and 26.9±8.5 µm, and those of the SUBC were 25.4±3.1 µm and 13.8±0.6 µm, respectively. Trueness values for the outer and inner surfaces of the SLAC and SUBC showed statistically significant differences (P < .001). Precision for the inner surface showed significance (P < .03), whereas that for the outer surface showed no significance (P < .58). CONCLUSION: The study demonstrates that provisional crowns produced by subtractive technology are superior to crowns fabricated by stereolithography in terms of accuracy.
Crowns

PURPOSE: The purpose of this study was to evaluate the marginal discrepancy of heat-pressed ceramic veneers manufactured using a CAD/CAM system. MATERIALS AND METHODS: The ceramic veneers for the abutment of a maxillary left central incisor were designed using a CAD/CAM software program. Ten veneers using a micro-stereolithography apparatus (AM group), ten veneers using a five-axis milling machine (SM group), and ten veneers using a traditional free-hand wax technique (TW group) were prepared according to the respective manufacturing method. The ceramic veneers were also fabricated using a heat-press technique, and a silicone replica was used to measure their marginal discrepancy. The marginal discrepancies were measured using a digital microscope (×160 magnification). The data were analyzed using a nonparametric Kruskal-Wallis H test. Finally, post-hoc comparisons were conducted using Bonferroni-corrected Mann-Whitney U tests (α=.05). RESULTS: The mean±SD of the total marginal discrepancy was 99.68±28.01 µm for the AM group, 76.60±28.76 µm for the SM group, and 83.08±39.74 µm for the TW group. There were significant differences in the total marginal discrepancies of the ceramic veneers (P < .05). CONCLUSION: The SM group showed a better fit than the AM and TW groups. However, all values were within the clinical tolerance. Therefore, CAD/CAM manufacturing methods can replace the traditional free-hand wax technique.
Ceramics ; Incisor ; Methods ; Silicon ; Silicones

OBJECTIVE: To compare the pain-reducing effect of forest bathing alone versus forest bathing in combination with stretching and strengthening exercises in patients with chronic posterior neck pain. METHODS: Sixty-four subjects with posterior neck pain that had lasted more than 3 months were enrolled. They were randomly divided into a forest bathing alone (FBA) group and a forest bathing with exercise (FBE) group; each group included 32 subjects. All subjects from both groups walked every morning in the forest for about 2 hours for 5 days. In the afternoon, the FBE group did a stretching and strengthening exercise for about 4 hours; the FBA group had free time in the woods. Visual analog scale (VAS) on one day, VAS over the previous week, neck disability index (NDI), EuroQol 5D-3L VAS (EQ VAS) and index (EQ index), McGill pain questionnaire (MPQ), the number of trigger points in the posterior neck region (TRPs), and the range of motion of the cervical spine were evaluated on the first and last day of the program and compared between the two groups. RESULTS: The number of TRPs were significantly reduced in the FBE group compared with the FBA group (p=0.013). However, the other scales showed no significant difference between the two groups. CONCLUSION: When patients with chronic posterior neck pain underwent a short-term forest bathing (less than 7 days) program, FBE was more effective in the reduction of the number of TRPs than FBA. However, all other pain measurement scales we evaluated showed no statistically significant difference between the two protocols.
Baths* ; Chronic Pain ; Complementary Therapies ; Exercise ; Exercise Therapy ; Humans ; Musculoskeletal Pain ; Neck ; Neck Pain* ; Pain Measurement ; Range of Motion, Articular ; Spine ; Trees* ; Trigger Points ; Visual Analog Scale ; Weights and Measures ; Wood

PURPOSE: We report a case of fundus albipunctatus discovered in a young patient. CASE SUMMARY: A 7.6-year-old female showed numerous small whitish-yellow flecks in the perimacular area and retinal periphery. Dark adapted 0.01 electroretinography (ERG) and dark adapted 3.0 ERG were profoundly reduced. At 26 months after the first visit, the best-corrected visual acuities were 1.0 right eye and 0.9 left eye. There were no pigmented lesions, atrophic lesions, or vascular abnormalities in the retina. Humphrey and Goldmann visual field tests were performed, but neither of the tests revealed any scotomas or other visual field defect. The number and size of characteristic numerous small whitish-yellow retinal flecks seemed almost unchanged. In spectral domain-optical coherence tomography (SD-OCT), the subretinal hyper-reflective lesions spanned the retinal pigment epithelium and the external limiting membrane. ERG showed improved dark adapted responses (dark adapted 0.01 ERG and dark adapted 3.0 ERG) after prolonged dark adaptation (2.5 hours). No family member showed any abnormal findings. CONCLUSIONS: Fundus albipunctatus is a rare disease in Koreans. We report a case diagnosed using fundus photography, SD-OCT, visual field tests, and ERG after prolonged dark adaptation (2.5 hours).
Child ; Dark Adaptation ; Electroretinography ; Female ; Humans ; Membranes ; Photography ; Rare Diseases ; Retina ; Retinal Pigment Epithelium ; Retinaldehyde ; Scotoma ; Tomography, Optical Coherence ; Visual Acuity ; Visual Field Tests ; Visual Fields