In elderly Graves’ patients, thyrotoxicosis may have vague or atypical clinical features. It could delay the detection of Graves’ disease itself, and also other combined diseases. Here, we report a case of a 73-year-old Graves’ patient who complained of several atypical symptoms such as chest discomfort, pain in the lower calf, severe agitation, depression, sense of impending doom, myalgia etc. Despite these discomforts, they had previously been ignored as vague clinical features of Graves’ disease. After 4 months with hemoptysis, serious pulmonary embolism was confirmed by computed tomography of the chest, and the patient suddenly died. Clinicians should remember that the atypical symptoms in elderly Graves’ patients can suggest hidden comorbidities. This is especially critical in case of acute cardiovascular diseases such as pulmonary embolism, which can be fatal to elderly patients.

In elderly Graves’ patients, thyrotoxicosis may have vague or atypical clinical features. It could delay the detection of Graves’ disease itself, and also other combined diseases. Here, we report a case of a 73-year-old Graves’ patient who complained of several atypical symptoms such as chest discomfort, pain in the lower calf, severe agitation, depression, sense of impending doom, myalgia etc. Despite these discomforts, they had previously been ignored as vague clinical features of Graves’ disease. After 4 months with hemoptysis, serious pulmonary embolism was confirmed by computed tomography of the chest, and the patient suddenly died. Clinicians should remember that the atypical symptoms in elderly Graves’ patients can suggest hidden comorbidities. This is especially critical in case of acute cardiovascular diseases such as pulmonary embolism, which can be fatal to elderly patients.

OBJECTIVE: We evaluated the difference in cognitive test performances between estrogen users and estrogen non-users in postmenopausal women. METHOD: 15 estrogen user women and 15 non-user women participated in this study. They were all menopausal and had 12 or more education years. We used the K-BNT(Boston naming test Korean version), BDI(Beck depression inventory), similarity test(subtest of K-WAIS) and SRT(selective reminding test) to evaluate the cognitive function between two groups. RESULT: Estrogen users scored significantly higher than non-users in cognitive test, particularly in similarity test and SRT(delayed recall). Estrogen users also scored lower than non-users in BDI. CONCLUSION: Estrogen replacement therapy may help postmenopausal women to maintain cognitive function and probably to improve the depression symptoms to some extent.
Cognition ; Depression ; Education ; Estrogen Replacement Therapy* ; Estrogens* ; Female ; Humans

Diabetic ketoacidosis (DKA) is an acute complication related to severe hyperglycemia. While the mortality rate for DKA is low with appropriate therapy, several complications may lead to deterioration of the clinical course. Here, we report a case of a 23-year-old patient with DKA who suffered from a rare but hemodynamically unstable cardiac arrhythmia, polymorphic ventricular tachycardia with prolonged QT interval, or Torsades de Pointes. During the recovery phase of DKA, three episodes of Torsades de Pointes suddenly occurred, and were recovered by immediate defibrillation. The patient did not have structural heart disease or a genetic predisposition. To the best of our knowledge, this is the first report of an adult with DKA complicated with QT prolongation related to Torsades de Points after correction of ketosis. To manage DKA, more attention may be needed on changes in the QT interval as well as risk factors for Torsades de Points.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

PURPOSE: To report of a series of successful reconstruction of soft tissue defect on distal leg with extensor digitorum brevis myo-cutaneous flap. METHODS: Between April 2002 to December 2004, 7 patients with soft tissue defect on distal leg were operated with Extensor Digiotorum Brevis myocutaneous flap. 6 of these patients had osteomyelitis. RESULTS: Extensor Digiotorum Brevis myocutaneous flap were used in 6 patients and reverse flow flap was used in one patient. Average follow up was 19 months. All flap were survived 100% without any complication and osteomyelitis were controled in all cases. Aesthetic and functional out come were excellent on both recipient and donor sites. CONCLUSION: The advantages of this flap are effectively control of local wound infection, constant and reliable anatomical structures, adequately thin flap. Technical easiness for raising flap and wide arch of rotation. Extensor Digitorum Brevis myo-cutaneous flap is one of ideal option for the reconstruction of distal leg and foot defects.
Follow-Up Studies ; Foot ; Humans ; Leg* ; Myocutaneous Flap ; Osteomyelitis ; Tissue Donors ; Wound Infection