BACKGROUND: Intracoronary stent with various designs have been developed to treat dissections or acute closure after angioplasty. The efficacy of flexible coil stent as a bail-out device has been reported. However, the restenosis after stenting still remained as a main limitation like other devices. This study reports on the angiographic follow-up after successful intracoronary stenting with flexible coil stent. METHOD: From April 1993 through July 1994, coronary stenting was tried in 21 patients by a single operator for various indications(acute or threatened closure, suboptimal result after balloon angioplasty). The nineteen(95%) out of 20 patients in whom stent was successfully deployed underwent follow-up coronary angiography 7.6+/-3.0 months after coronary stenting. RESULT: Mean age was 54.7+/-11.3(33-73) years and 16 parients were men. Clinical diagnosis of patients were as follows : stable angina 7, unstable angina 6, old myocardial infarction with stable angina 6 and acute myocardial infarction in 1 patient, respectively. Stents were implanted at left anterior descending artery in 9, left circumflex artery in 5 and right coronary artery in 8. Ten out of 21 stents(47.6%) were found to be renarrowed more than 50% at follow-up coronary angiography. There was no significant difference in clinical and angiographic variables between restenosis group and no-restenosis group. Coronary artery bypass graft surgery was performed in 1 patient for the treatment of restenosis after stenting. Repeat PTCA was performed in 3 patients and remaining 5 patients were followed medically. CONCLUSION: Flexible coil(Gianturco-Roubin) coronary stent is a useful adjunct percutaneous intervention to prevent or minimize complicatioms associated with dissections. Despite favorable initial angiographic and clinical results, 47.6% of stents were found to be renarrowed significantly at follow-up coronary angiography. New techniques or more optimal characters of stents would be desired.
Angina, Stable ; Angina, Unstable ; Angioplasty ; Arteries ; Coronary Angiography ; Coronary Artery Bypass ; Coronary Vessels ; Diagnosis ; Follow-Up Studies* ; Humans ; Male ; Myocardial Infarction ; Stents* ; Transplants

BACKGROUND: Intracoronary stent with various designs have been developed to treat dissections or acute closure after angioplasty. The efficacy of flexible coil stent as a bail-out device has been reported. However, the restenosis after stenting still remained as a main limitation like other devices. This study reports on the angiographic follow-up after successful intracoronary stenting with flexible coil stent. METHOD: From April 1993 through July 1994, coronary stenting was tried in 21 patients by a single operator for various indications(acute or threatened closure, suboptimal result after balloon angioplasty). The nineteen(95%) out of 20 patients in whom stent was successfully deployed underwent follow-up coronary angiography 7.6+/-3.0 months after coronary stenting. RESULT: Mean age was 54.7+/-11.3(33-73) years and 16 parients were men. Clinical diagnosis of patients were as follows : stable angina 7, unstable angina 6, old myocardial infarction with stable angina 6 and acute myocardial infarction in 1 patient, respectively. Stents were implanted at left anterior descending artery in 9, left circumflex artery in 5 and right coronary artery in 8. Ten out of 21 stents(47.6%) were found to be renarrowed more than 50% at follow-up coronary angiography. There was no significant difference in clinical and angiographic variables between restenosis group and no-restenosis group. Coronary artery bypass graft surgery was performed in 1 patient for the treatment of restenosis after stenting. Repeat PTCA was performed in 3 patients and remaining 5 patients were followed medically. CONCLUSION: Flexible coil(Gianturco-Roubin) coronary stent is a useful adjunct percutaneous intervention to prevent or minimize complicatioms associated with dissections. Despite favorable initial angiographic and clinical results, 47.6% of stents were found to be renarrowed significantly at follow-up coronary angiography. New techniques or more optimal characters of stents would be desired.
Angina, Stable ; Angina, Unstable ; Angioplasty ; Arteries ; Coronary Angiography ; Coronary Artery Bypass ; Coronary Vessels ; Diagnosis ; Follow-Up Studies* ; Humans ; Male ; Myocardial Infarction ; Stents* ; Transplants

Thirty patient with essential hypertension were administered Manidipine, a new calcium antagonist, 10~20mg once daily to evaluate the hypotensive efficacy and safety for 8 weeks. And the followings were the result. 1) Patients were consists of 14 male, 16 female, aged 53 in average and classified as mild in 21 and moderate in 9 patients. 2) Optimum intial dose was 10mg and 10 to 20mg were the doses recommended. 3) Blood pressure dropped after 8 weeks 24/13mmHg in average, rewarding 80% effectiveness and normalized in 87%. 4) Most frequent side reaction was facial flushing in 5 patiens followed by palpitation and dizziness, all of which did not disturb the continuation of medication. 5) Most of routine laboratory parameter were normal and unchanged between before and after the trial. 6) Overall rating of usefulness was 77%. In conclusion, Manidipine 10 to 20mg once daily regimen is well tolerated and effective in the treatment of mild to moderate essential hypertension.
Blood Pressure ; Calcium ; Dizziness ; Female ; Flushing ; Humans ; Hypertension* ; Male ; Reward

No abstract available.
Classification* ; Dermatoglyphics* ; Yersinia*

No abstract available.
Ichthyosis, Lamellar*

Indirect composite resin are used as an popular effective esthetic material in prosthetic dentistry, often with metallic substructure that provides support for restorations. Recently, new indirect composite resins as a substitute of ceramic have been developed. These resins provide good esthetics, with a wide range of hue and chroma. And the flexural strength of those is in the range of 120-150MPa, which is higher than that of feldspathic ceramic, and similar tot hat of Dicor. Although it has many merits, one of the major clinical problems of composite resins is the bond failure between metal and resin due to insufficient interfacial bond strength. The purpose of this study was to evaluate shear bond strength of the reinforced indirect composite resin to dental alloys. Three different composite resin systems(Artglass . Sculpture , Targis ) as test groups and ceramic(VMK 68 ) as control group were bonded to Ni-Cr-Be alloy(Rexillium III ) and gold alloy(Dave 4). All specimens were stored at 37degrees C distilled water for 24 hours and the half of specimens were thermocycled 2000 times at temperature from 5degrees C to 60degrees C. The shear bond strengths of reinforced indirect composite resins to dental alloys were measured by using the universal testing machine, and modes of debonding were observed by stereoscope and scanning electron microscope. The results were as follows : 1. The shear bond strengths of reinforced indirect composit resins to dental alloys were approximately half those of ceramic to dental alloys(P<0.01). 2. There was no significant difference between the shear bond strength of several reinforced indirect composite resins to metal. 3. Alloy type did not affect on the shear bond strengths of resin to metal, but the shear bond strengths of ceramic to gold alloys were higher than those of ceramic to Ni-Cr alloys(P<0.05). 4. The shear bond strenghts of Artglass and Targis to gold alloys were significantly decreased after thermocycling treatment(P<0.01). 5. Sculpture showed cohesive, adhesive, and mixed failure modes, but Artglass and Targis showed adhesive or mixed failures. And ceramic showed cohesive and mixed failures.
Adhesives ; Alloys ; Ceramics ; Composite Resins* ; Dental Alloys* ; Dentistry ; Esthetics ; Gold Alloys ; Sculpture ; Water

No abstract available.
Thanatophoric Dysplasia*

BACKGROUND: Many physicians hesitate to discuss do-not-resuscitate (DNR) orders with patients or family members in critical situations. In the intensive care unit (ICU), delayed DNR decisions could cause unintentional cardiopulmonary resuscitation, patient distress, and substantial cost. We investigated whether the timing of DNR designation affects patient outcome in the medical ICU. METHODS: We enrolled retrospective patients with written DNR orders in a medical ICU (13 bed) from June 1, 2014 to May 31, 2015. The patients were divided into two groups: early DNR patients for whom DNR orders were implemented within 48 h of ICU admission, and late DNR patients for whom DNR orders were implemented more than 48 h after ICU admission. RESULTS: Herein, 354 patients were admitted to the medical ICU and among them, 80 (22.6%) patients had requested DNR orders. Of these patients, 37 (46.3%) had designated DNR orders within 48 hours of ICU admission and 43 (53.7%) patients had designated DNR orders more than 48 hours after ICU admission. Compared with early DNR patients, late DNR patients tended to withhold or withdraw life-sustaining management (18.9% vs. 37.2%, p = 0.072). DNR consent forms were signed by family members instead of the patients. Septic shock was the most common cause of medical ICU admission in both the early and late DNR patients (54.1% vs. 37.2%, p = 0.131). There was no difference in in-hospital mortality (83.8% vs. 81.4%, p = 0.779). Late DNR patients had longer ICU stays than early DNR patients (7.4 ± 8.1 vs. 19.7 ± 19.2, p < 0.001). CONCLUSIONS: Clinical outcomes are not influenced by the time of DNR designation in the medical ICU. The late DNR group is associated with a longer length of ICU stay and a tendency of withholding or withdrawing life-sustaining treatment. However, further studies are needed to clarify the guideline for end-of-life care in critically ill patients.
Advance Directives ; Cardiopulmonary Resuscitation ; Consent Forms ; Critical Illness* ; Hospital Mortality ; Humans ; Intensive Care Units ; Resuscitation Orders* ; Retrospective Studies ; Shock, Septic

No abstract available.
Humans ; Infant* ; Intussusception*

The purpose of this study was to investigate the displacements of cast framework by torch soldering and electric soldering techniques. Specimen had two cylinders and connecting bar that had sectioned with 0.3mm gap at mid point. 10 of total specimens were divided into two groups. In torch soldered group, soldering investment block was made and conventional torch soldering procedure was carried out. In electric soldered group, electric soldering was carried out on the master cast without soldering investment block by using electric soldering machine(Dentapunkt DP 7, Kulzer, Germany). After soldering procedure, three dimensional coordinates of two centroids of each cylinder were measured by three dimensional coordinate measuring machine. The intercentroidal displacement and global displacement were calculated and then, these values were compared and evaluated. The results were obtained as follows: 1. Intercentroidal distances of specimens decreased after both soldering procedures, and the decrease in intercentroidal distance was greater for torch soldered group than for electric soldered group 2. Global displacements of torch soldered group were greater than those of electric soldered group
Investments