Purpose: Developmentally regulated GTP-binding protein 2 (DRG2) regulates microtubule dynamics and G2/M arrest during docetaxel treatment. Poly ADP-ribose polymerase (PARP) acts as an important repair system for DNA damage caused by docetaxel treatment. This study investigated whether DRG2 expression affects response to PARP inhibitors (olaparib) using prostate cancer cell lines PC3, DU145, LNCaP-FGC, and LNCaP-LN3. Materials and Methods: The cell viability and DRG2 expression levels were assessed using colorimetric-based cell viability assay and western blot. Cells were transfected with DRG2 siRNA, and pcDNA6/V5-DRG2 was used to overexpress DRG2. Flow cytometry was applied for cell cycle assay and apoptosis analysis using the Annexing V cell death assay. Results: The expression of DRG2 was highest in LNCaP-LN3 and lowest in DU145 cells. Expressions of p53 in PC3, DU145, and the two LNCaP cell lines were null-type, high-expression, and medium-expression, respectively. In PC3 (DRG2 high, p53 null) cells, docetaxel increased G2/M arrest without apoptosis; however, subsequent treatment with olaparib promoted apoptosis. In DU145 and LNCaP-FGC (DRG2 low), docetaxel increased sub-G1 but not G2/M arrest and induced apoptosis, whereas olaparib had no additional effect. In LNCaP-LN3 (DRG2 high, p53 wild-type), docetaxel increased sub-G1 and G2/M arrest, furthermore olaparib enhanced cell death. Docetaxel and olaparib combination treatment had a slight effect on DRG2 knockdown PC3, but increased apoptosis in DRG2-overexpressed DU145 cells. Conclusions DRG2 and p53 expressions play an important role in prostate cancer cell lines treated with docetaxel, and DRG2 levels can predict the response to PARP inhibitors.

Background: Deceased donor liver transplantation (DDLT) and living donor liver transplantation (LDLT) are employed to address highly urgent patients, including those with acute liver failure (ALF), acute-on-chronic liver failure (ACLF), or critical cirrhosis. This study compares outcomes between LDLT and DDLT patients with ALF, ACLF, or critical cirrhosis in highly urgent LDLT (HU-LDLT) applications. Methods: This study conducted a retrospective analysis of the Korean Network for Organ Sharing (KONOS) data, which included 391 consecutive HU-LDLT applications from 2017 to 2021. Results: The proportion of DDLT was 15.1% (n=59) within the cohort of HU-LDLT applications. The prevalence of hepatorenal syndrome, duration of pre-transplant intensive care unit (ICU) care, incidence of pre-transplant continuous renal replacement therapy, and median model for end-stage liver disease scores were significantly greater and prolonged in DDLT patients compared to LDLT patients. Statistical analysis revealed no significant differences in postoperative complications or overall survival between the two groups. In the multivariate analysis, only pre-transplant ventilator care emerged as a significant predisposing factor for mortality. Conclusion The present study indicates that LDLT is a viable option, yielding comparable perioperative and long-term outcomes to DDLT for HU patients, which can encourage living liver donation to overcome organ shortages in HU patients.

Objective: Resilience is the ability to bounce back from stressful events using individual and environmental resources. The online intervention program, MoVemEnT, which includes mindfulness training and emotion regulation, was developed to enhance resilience among young adults. Methods: Persons without current medical or psychiatric diseases, aged 20–40 years, were recruited. Ninety-six participants were randomly assigned to either the intervention group or a waiting list control (WLC) group, with 45 participants per group completing the program. Results: Results demonstrated significant improvements in the intervention group in measures of emotion regulation (Difficulties in Emotion Regulation Scale, DERS) and clinical symptoms of depression (Center for Epidemiological Studies-Depression Scale, CES-D) and anxiety (Generalized Anxiety Disorder-7) compared to the WLC group (all p<0.05). Correlation analyses indicated that improvements in DERS scores were associated with enhanced resilience, as measured by the Korean Resilience Quotient-53 (KRQ-53) and reduced CES-D scores. Reduction in DERS scores can reduce depressive symptoms (CES-D) through direct and indirect pathways via an increase in KRQ-53, according to mediation analyses. Conclusion Our findings reported positive effects of the MoVemEnT program, which includes short videos and brief homework assignments, on resilience in young adults. This study suggests that online intervention programs could offer an opportunity to simultaneously improve general mental health among a large population and may help reduce the burden of face-to-face psychological interventions.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Objective: Resilience is the ability to bounce back from stressful events using individual and environmental resources. The online intervention program, MoVemEnT, which includes mindfulness training and emotion regulation, was developed to enhance resilience among young adults. Methods: Persons without current medical or psychiatric diseases, aged 20–40 years, were recruited. Ninety-six participants were randomly assigned to either the intervention group or a waiting list control (WLC) group, with 45 participants per group completing the program. Results: Results demonstrated significant improvements in the intervention group in measures of emotion regulation (Difficulties in Emotion Regulation Scale, DERS) and clinical symptoms of depression (Center for Epidemiological Studies-Depression Scale, CES-D) and anxiety (Generalized Anxiety Disorder-7) compared to the WLC group (all p<0.05). Correlation analyses indicated that improvements in DERS scores were associated with enhanced resilience, as measured by the Korean Resilience Quotient-53 (KRQ-53) and reduced CES-D scores. Reduction in DERS scores can reduce depressive symptoms (CES-D) through direct and indirect pathways via an increase in KRQ-53, according to mediation analyses. Conclusion Our findings reported positive effects of the MoVemEnT program, which includes short videos and brief homework assignments, on resilience in young adults. This study suggests that online intervention programs could offer an opportunity to simultaneously improve general mental health among a large population and may help reduce the burden of face-to-face psychological interventions.

PURPOSE: Three-dimensional (3D) printing must go through a post-processing procedure. This study aimed to evaluate the effects of different cleaning methods on 3D printed three-unit fixed partial dentures using 3D analysis. MATERIALS AND METHODS: A three-unit fixed partial denture was designed and printed using two different printers. The evaluation was taken regarding cleaning method with ethanol (ETH) or isopropanol (IPA), and combining ultrasonic (US) technique for the following groups: group 1, ETH; group 2, ETH+US; group 3, IPA; group 4, IPA+US; and group 5, US. The 3D evaluation was conducted by calculating the mean distance between two specific points and analyzing various angular deviations, utilizing the geometry-embedded library. In addition, visual analysis was performed by creating sectional planes in different points of view. Normality test and independent t-test were performed to compare results between the two printers used in this study. In addition, one-way ANOVA was performed to compare cleaning method groups. RESULTS: Mean distance results showed statistical differences between printers for groups IPA, US, and IPA+US, whereas no significant differences were found among cleaning methods. Angular measurements were taken at the bucco-lingual, proximal, and occlusal planes to assess deviations in the internal surfaces. Overall results showed a tendency of shrinkage of the printed three-unit fixed partial denture. CONCLUSION Ultrasonic treatment may impact the washing efficiency when used with other cleaning solutions regarding angular and longitudinal deformation. Adequate selection of post-processing methods is crucial to decrease morphological deformities in 3D printed materials.

Ketone bodies produced by sodium-glucose cotransporter 2 (SGLT2) inhibitors can be advantageous, providing an efficient and stable energy source for the brain and muscles. However, in patients with diabetes, ketogenesis induced by SGLT2 inhibitors may be harmful, potentially resulting in severe diabetic ketoacidosis (DKA). During fasting, ketone body production serves as an alternative and efficient energy source for the brain by utilizing stored fat, promoting mental clarity, and reducing dependence on glucose. The concurrent use of SGLT2 inhibitors during perioperative fasting may further elevate the risk of euglycemic DKA. We describe a case of DKA that occurred during perioperative fasting in a patient receiving empagliflozin, an SGLT2 inhibitor. This case underscores the importance of recognizing the potential risk of DKA in patients with diabetes using SGLT2 inhibitors during perioperative fasting.

A schwannoma is a benign soft tissue tumor derived from Schwann cells of the nerve sheath. The lateral femoral cutaneous nerve is a sensory nerve originating from the second and third lumbar vertebra nerve roots, passing under the inguinal ligament and dividing into anterior and posterior branches. The anterior branch which is a major division and the main nerve that causes meralgia paresthetica supplies the knee joint from the anterior thigh. In addition, the posterior branch supplies the lateral thigh at the greater trochanter level.This paper reports the case of a 52-year-old woman with a very rare schwannoma in the terminal twig of posterior branch of the lateral femoral cutaneous nerve of right thigh protruded through the fascia lata with literatures review.