Biomechanical Phenomena ; Humans ; Rotator Cuff ; Rotator Cuff Injuries ; Shoulder Joint

Rotator cuff tear is a common disease that causes shoulder pain and limitation of activity. Rotator cuff repair with arthroscope has become the mainstream method with advance in surgical techniques. In spite of this, the highly rate of retear after surgery mainly because the tendon to bone interface form scar tissue rather than native tissue. Biomechanical of the interface is so poor to retear because of the change of Histological. In recent years, more and more researchers are devoted to the study of biology and biomechanical for improving the process of tendon to bone healing and restoring the original structure at the interface, This article reviews the research progress with four factors(inflammation, slow or limited bone ingrowth into the tendon graft, Mechanical stimulation, scant stem cell) and physiotherapy that affect tendon to bone healing.
Arthroplasty ; Humans ; Rotator Cuff ; Rotator Cuff Injuries ; Tendon Injuries ; Tendons ; Wound Healing

The rate of rotator cuff injury repair and retear is high in elderly patients due to the combination of different degrees of osteoporosis. To solve this problem, many surgeons try to reduce retear rate of rotator cuff injuries in these patients by increasing the initial fixation strength of anchors and changing local bone conditions. The rapid advances of tissue engineering have made it possible to use growth factors as an aid. However, repair of rotator cuff injury with osteoporosis is still a great challenge for clinical workers. How to better increase anchor fixation strength, improve micro-environment of tendon and bone healing, reduce the rotator cuff retear rate have become the research focus in recent years. The paper reviewed literatures on the relationshipbetween osteoporosis and rotator cuff injury, effect of osteoporosis in rotator cuff tendon healing, methods of reducing osteoporosis on rotator cuff tendon healing, in order to guide clinical treatment, improve operative effect and postoperative satisfaction.
Aged ; Arthroplasty ; Humans ; Osteoporosis ; Rotator Cuff/surgery* ; Rotator Cuff Injuries/surgery* ; Tendons/surgery*

Shoulder arthroscopic as a conventional method usually is applied to repair rotator cuff tears. In clinical, plenty single-row, double-row and transosseous tunnels suture technique are performed, but the ideal suture technique for rotator cuff repair is not found. Compared with single-row, double-row has better strength in biomechanics property. As the two best suture technique among the single-row, massive cuff stitch and modified Mason-Allen suture have the strongest biomechanics property. Clinical trials indicate that double-row could improve healing rates, but there are no significant difference in clinical outcome functional scores. Transosseous tunnel techniques possess a better bio-mechanic property, which could improve regional micro-environment and induce tendon-bone healing. Transosseous tunnel techniques are better for small to media size rotator cuff tears and osteoporosis patient. The author suggest that optimal rotator cuff repair technique should performed according to skill of performer and individual of patient by analysing bio-mechanic properties, clinical outcome, operative complexity and patient situation. The technique should follow simple opertaion, rapid, less trauma, stable fixation and utility to perform.
Arthroscopy ; Humans ; Rotator Cuff/surgery* ; Rotator Cuff Injuries/surgery* ; Suture Anchors ; Suture Techniques ; Sutures

Rotator cuff repair is a common treatment for rotator cuff tear, which could effectively relieve shoulder pain and improve shoulder movement, and the incidence of rotator cuff retear after rotator cuff repair is still high. The main reason is poor tendon-bone healing in rotator cuff enthesis after rotator cuff repair and could not recover the original histological structure and biomechanical properties. Therefore, the key to solve the problem is how to effectively improve the healing of tendon bone at the end of rotator cuff. With the in-depth study of rotator cuff enthesis, various treatments have made great progress on improving tendon to bone healing of rotator cuff. Our study will discuss the researchprogress on tendon to bone healing of rotator cuff in recent years from three following aspects to provide some guidance for the clinical treatment of rotator cuff tear:the factors affecting the tendon to bone healing of rotator cuff, the recovery of tendon to bone interface promoting the tendon to bone healing of rotator cuff and the application of tissue engineering in tendon to bone healing.
Arthroplasty ; Humans ; Rotator Cuff ; surgery ; Rotator Cuff Injuries ; surgery ; Tendons ; surgery ; Wound Healing

OBJECTIVE: To compare and analyze the biomechanical differences between different transosseous techniques in arthroscopic repairment of rotator cuff injuries by finite element analysis. METHODS: Finite element models of traditional arthroscopic transosseous(ATO) technique, giant needle technique, and ArthroTunneler(AT) technique were established based on the shoulder CT data of a healthy adult. Then, loads of 10 N and 20 N were applied to the sutures on the different technical models, respectively. Compare and analyze the stress changes of the bone tunnels and sutures of the three models were compared and analyzed. RESULTS: Under the same condition of loading, the stress on the lateral bone tunnels and sutures of the traditional ATO technology model was the largest, followed by the giant needle technology model. The stress on the mid-section bone tunnels and sutures of the AT technology model was the largest, followed by the giant needle technology model. Under the different conditions of loading, the high-stress areas of the three models were mainly concentrated on the contact area between the sutures and the bone tunnels. Besides, compared with the traditional ATO technology model, the stress distribution of the lateral bone tunnels and sutures of the giant needle technology and AT technology model were more dispersed, but there was obvious stress concentration phenomena in the stress distribution in the mid-section bone tunnels and sutures in the AT technology model. CONCLUSION Compared with the traditional ATO technique, both the giant needle technique and the AT technique can reduce the risk of cutout between the bone tunnel and suture, and may be better treatments for rotator cuff tear. However, compared with the giant needle technique, the application of AT technique in patients with osteoporosis may be limited.
Adult ; Humans ; Rotator Cuff Injuries/surgery* ; Rotator Cuff/surgery* ; Finite Element Analysis ; Arthroscopy/methods* ; Suture Techniques

OBJECTIVE: To compare the effect of two different arthroscopic procedures, threading lasso fixation and full-thickness conversion, for repairing articular-sided partial-thickness supraspinatus tendon tear. METHODS: From July 2015 to November 2018, 21 patients with articular-sided partial-thickness supraspinatus tendon tears underwent arthroscopic modified threading lasso fixation repair(group A). There were 12 males and 9 females in the group, with an average age of(53.2±6.4)years old. Twenty-four patients with articular-sided partial-thickness supraspinatus tendon tears received arthroscopic full-thickness conversion repair(group B). In this group, there were 14 males and 10 females, with an average age of (55.7±5.2) years old. The American Shoulder and Elbow Surgeons (ASES) score and University of California Los Angeles (UCLA) shoulder score were used to evaluate preoperative and postoperative clinical function. MRI was used to examine the healing status of the reconstructed rotator cuff. RESULTS: All patients were followed up, and the duration ranged from 20 to 27 months, with a mean of (23.7±3.1) months. In threading lasso fixation group, ASES score and UCLA score increased from 50.6±6.4 and 15.6±2.7 preoperatively to 87.3±5.2 and 31.6±2.4 postoperatively. In full-thickness conversion group, ASES score and UCLA score increased from 52.3±5.6 and 16.8±2.4 scores to 90.1±4.8 and 32.1±2.8. There were also no significant differences in ASES score and Constant score between the two groups before and after operation. There were no significant differences in rotator cuff healing between the two groups(χ²=2.374, P=0.128). CONCLUSION For the treatment of articular-sided partial-thickness supraspinatus tendon tears both arthroscopic repairs employing threading lasso fixation and full-thickness conversion could achieve satisfactory clinical results, and there are no significant differences in clinical outcomes between the two techniques. Arthroscopic repair with threading lasso fixation is a novel transtendinous procedure in which integrity of the tendon can be preserved.
Arthroscopy/methods* ; Female ; Humans ; Male ; Middle Aged ; Rotator Cuff ; Rotator Cuff Injuries/surgery* ; Shoulder/surgery* ; Tendons

OBJECTIVE: To investigate the diagnostic value of 6 conventional physical examination tests for the diagnosis of supraspinatus tendon tears, and how well they could tell the difference between partial-and full-thickness tears. METHODS: A total of 91 patients with different shoulder symptoms who received shoulder arthroscopic procedure were enrolled in the study from June 2017 to September 2020. The intraoperative findings were compared with the results of the preoperative physical examination of 6 clinical tests, including the Hug-up test, the Jobe test, the 0°abduction test, the drop arm test, the Neer test, and the Hawkins test, to determine the sensitivity, specificity, positive and negative predictive value, accuracy, positive and negative likelihood ratio of each test. RESULTS: By arthroscopy, a total of 44 full-thickness tears, 34 partial-thickness tears, and 13 intact supraspinatus tendons were found in all 91 cases. The Hug-up and the Jobe tests significantly correlated with the intraoperative findings. The sensitivity of the Hug-up test, the Jobe test, the 0° abduction test, the drop arm test, the Neer test, and the Hawkins test was 0.90, 0.79, 0.64, 0.42, 0.49, 0.24 respectively;the specificity was 0.61, 0.69, 0.54, 0.38, 0.31, 0.77;the positive predictive value was 0.93, 0.94, 0.89, 0.80, 0.81, 0.86;the negative predictive value was 0.50, 0.36, 0.20, 0.10, 0.09, 0.14;the accuracy was 0.86, 0.78, 0.63, 0.42, 0.46, 0.32;the positive likelihood ratio was 2.30, 2.58, 1.39, 0.69, 0.71, 1.06;and the negative likelihood ratio was 0.16, 0.30, 0.67, 1.50, 1.65, 0.98. CONCLUSION The Jobe test and the Hug-up test are both effective at accurately diagnosing supraspinatus tendon tears, the Hug-up test detects supraspinatus tears with a high sensitivity, and similar specificity. The tests assessed in this study are not capable of distinguish between partial-and full thickness supraspinatus tendon tears.
Arthroscopy ; Humans ; Physical Examination/methods* ; Rotator Cuff ; Rotator Cuff Injuries/surgery* ; Tendons

OBJECTIVE: To evaluate the association between rotator cuff tear and the proximal migration of humeral head. METHODS: In this research, we retrospectively selected 30 patients with unilateral rotator cuff tear in Peking University People's Hospital from September 2015 to May 2016, who received magnetic resonance imaging (MRI) and X-ray of the painful shoulder before enrollment in this study, the duration between the two examinations was no longer than 1 week, and also there was no past history of surgery in the selected shoulders. There was no other exclusion criteria. Upward migration index (UMI) was the ratio between the distance of humeral head center to the lower surface of acromion, and the radius of humeral head circle, which could help to minimize the effect of anatomy difference and imaging magnification, compared with the traditional acromiohumeral distance (AHD). Then we introduced this index to stratify the selected 30 patients into 3 groups, and each group contained 10 patients, UMI of group 1 was >1 and ≤1.2, UMI of group 2 was >1.2 and ≤1.4, UMI of group 3 was >1.4. As the supraspinatus was most commonly affected by pathological change among the four rotator cuff tendons, we took it as the research object. Then we used the Spearman correlation analysis to evaluate the relationship between UMI and fatty degeneration, rotator cuff tear size and the thickness of ruptured supraspinatus tendon from X-ray and MRI. RESULTS: In the A-P view, the average UMI was 1.33 (1.02-1.51, SD: ±0.22). UMI and the tear size had a significant negative correlation (R=-0.584, P<0.01), and also there was a negative correlation between the fatty degeneration of the supraspinatus (R=-0.312, P=0.033). However, there was no correlation between UMI and the thickness of ruptured supraspinatus (R=0.127, P=0.071). CONCLUSION UMI is related with the fatty degeneration of supraspinatus and the tear size. The reduction of UMI is a predictable and reliable mark of rotator cuff tear and degeneration in clinic. Physicians can use physical examination and X-ray first when facing the patients with shoulder pain, which is convenient and helpful for evaluating rotator cuff tears.
Humans ; Humeral Head ; Magnetic Resonance Imaging ; Retrospective Studies ; Rotator Cuff ; Rotator Cuff Injuries ; Shoulder Joint

OBJECTIVE: To analyze the preoperative pulmonary function in rotator cuff injury patients and the possible influencing factors. METHODS: All the rotator cuff surgery patients who underwent pre-operative pulmonary function examination in Peking University Third Hospital from Jan. 2020 to Jun. 2020 were retrospectively reviewed. Their perioperative medical records and main parameters of pulmonary function were collected from database management system, and their gender, age, body mass index (BMI), smoking history, time from injury, visual analogue scale (VAS) and other factors impacting on preoperative pulmonary function were studied. RESULTS: Twenty-nine patients with rotator cuff injury were included, among whom 1 patient was reported to have restrictive ventilation dysfunction and 2 patients to have obstructive ventilation dysfunction. All the three patients denied the history of respiratory diseases, and had no respiratory symptoms. In all enrolled patients, the mean forced expiratory volume in one second (FEV1)/ forced vital capacity (FVC) was 79.2%±5.9%, and the mean VAS pain score was 3.66±1.26. In addition, the dynamic pulmonary functions (FVC, FEV1) were reduced in more than half of the elderly, and the total lung capacity (TLC) was lower than the estimated value in 2/3 of the elderly. There were significant differences in three main indexes of pulmonary functions between genders, and the percentage of the estimated TLC between normal BMI group (18 kg/m² < BMI < 24 kg/m²) and overweight/obesity group (BMI≥24 kg/m²) was significantly different. Based on the injury time longer than 1 year or not, the results indicated that FVC and TLC were significantly different between the two groups. CONCLUSION In addition to gender and age, time from injury and severity of pain, as well as overweight/obesity, may influence pulmonary function outcomes in the elderly rotator cuff patients. Targeted intervention can be carried out on these factors before surgery. Preoperative lung function test can be used as one of the basic evaluation indexes for respiratory training and rehabilitation of patients.
Aged ; Female ; Humans ; Lung ; Male ; Respiratory Function Tests ; Retrospective Studies ; Rotator Cuff ; Rotator Cuff Injuries/surgery*