3.Effect evaluation of different methods for removal of root canal filling materials.
Wenjun YANG ; Jiajia HAN ; Yichen WANG ; Fengxiang LI ; Qitao DU
West China Journal of Stomatology 2022;40(6):685-689
OBJECTIVES:
This study aimed to evaluate the efficacy of three methods in root canal retreatment to remove the filling material in the root canals.
METHODS:
Ninety tooth roots filled by gutta percha or plasticized material (n=45, each) were randomly divided into three groups (n=15). WaveOne (WaveOne group), 1#P drill+WaveOne (1#P+WaveOne group), and ultrasound P5 working end ET25+ProTaper Universal (P5+ProTaper Universal group) were used to remove the root canal filling material and prepare for root canal. The operating time of each canal was recorded and the percentage of residual filling material area was measured on the root canal wall of the mesial and distal dissected root section. The degree of deviation of the root canal after operation was measured for the root samples filled by gutta percha.
RESULTS:
The type of root filling material and the method of root canal retreatment had no significant effect on the percentage of residual area of the filling material (P>0.05). However, the remaining filling material area of apical 1/3 of the root canal was significantly higher than that of cervical 1/3 of the root canal (P<0.05). The average operating times for removing gutta-percha or plasticized material in the W and 1#P+WaveOne groups were significantly less than that in the P5+ProTaper Universal group (P=0.000). The root canal retreatment methods had no significant effect on the curvature of the root canal (P=0.650).
CONCLUSIONS
WaveOne single file's cleaning ability and center positioning ability were similar to those of ProTaper Universal. Moreover, WaveOne can be independently used for most root canals without a pathway when removing the root canal fillings, thereby simplifying the process of root canal retreatment.
Equipment Design
;
Gutta-Percha
;
Nickel
;
Root Canal Filling Materials
;
Root Canal Preparation/methods*
;
Titanium
4.Application of Nd:YAG laser in stomatology.
Yi DING ; Shimeng XIAO ; Heng YANG ; Shu MENG
West China Journal of Stomatology 2015;33(5):445-450
Developments in science and technology include the use of laser as an auxiliary device in treating oral diseases. Nd:YAG laser is convenient and safe to use. Nd:YAG laser irradiation leaves no scabby area on the wound surface, causes a mild reaction postoperation, and promotes high comfort. Therefore, this treatment has attracted increasing attention in the clinical setting. This review enumerates the applications of water-cooled pulsed Nd:YAG laser in hard and soft tissues in oral medicine. Nd:YAG laser in hard tissues can be applied in cavity preparation, acid etching, root canal preparation and sterilization, and dentin desensitization therapy. Meanwhile, the applications of this laser in soft tissues include adjunctive therapy in basic periodontitis treatment, gingival aesthetic treatment, and resection. This review suggests the importance of Nd:YAG laser as an auxiliary device in the clinical diagnosis and treatment of oral diseases.
Dental Cavity Preparation
;
Dentin
;
Humans
;
Lasers, Solid-State
;
Oral Medicine
;
instrumentation
;
methods
;
Root Canal Preparation
6.Application of hand-use ProTaper instruments in endodontic treatment of molar canals.
Sui-qi MA ; Qian XIE ; Yin-feng ZHOU
Journal of Southern Medical University 2010;30(7):1676-1678
OBJECTIVETo evaluate the application of hand-use ProTaper instruments in endodontic treatment of molar canals.
METHODSA total of 203 permanent molars were randomly divided into the experimental group (99 molars) and control group (104 molars) prepared by hand-use ProTaper instruments and standard stainless steel K-file, respectively. The molars in the two groups were obturated by cold lateral condensation technique. The root canal preparation and obturation were evaluated by radiograph, and the working time of preparation and post-operative emergencies were analyzed.
RESULTSThe preparation time in the experimental group was obviously shorter than that in the control group (P<0.01). The rate of satisfactory effect was significantly higher in the experimental group than in the control group (P<0.01), and the rate of post-operative emergencies was significantly lower in the experimental group (P<0.01).
CONCLUSIONThe application of hand-use ProTaper instruments may improve the effect of root canal treatment of the molars and shorten the working time and reduce the post-operative emergencies.
Adult ; Dental Instruments ; Female ; Humans ; Male ; Middle Aged ; Molar ; Root Canal Preparation ; methods ; Young Adult
7.Effectiveness of three auxiliary irrigation methods for cleaning the internal walls of root canals of curved isolated teeth.
Chaoying WEN ; Wenxin ZUO ; Wen LUO ; Fei HE
West China Journal of Stomatology 2023;41(5):554-562
OBJECTIVES:
This study aimed to compare the effectiveness of ultrasound and acoustic and laser cleaning of curved root canals.
METHODS:
A total of 92 molars with independent root canals with a curvature of 20°-40° were prepared and standardized at 04 25# and stained with gentian violet solution for 72 h. Among them, 52 were randomly divi-ded into four groups for final rinsing (n=13): NI group, PUI group, EDDY group, and PIPS group. Ten samples in each group were cut horizontally along the long axis perpendicular to the root and divided into curved upper, curved, and apical segments. Images were taken with a stereomicroscope and Image J measurements were taken to calculate the depth of rinse penetration. The remaining three samples from each group were split along the long axis of the dentin, photographed by scanning electron microscope to record the dentin tubule exposure and staining layer, and scored for staining layer by double-blind method. SPSS 26.0 software was used to perform statistical analysis and select the best flushing method. An extra 40 samples were randomly divided into four groups for detection of flushing fluid penetration depth (n=10): 10, 20, 30, and 40 s.
RESULTS:
In the upper part, the mean depth of infiltration was not significantly different between the experimental and control groups (P>0.05). The PIPS group had a significantly lower smear layer score than the control group and the EDDY group (P<0.01). In the curved segment, the mean depth of infiltration was significantly greater in the PUI group than in the control group (P<0.05); the tarnish layer score was lower in each experimental group than in the control group. At the top, the mean depth of infiltration was greater in the PUI and PIPS groups than in the control group (P<0.05), and the smear layer score was lower in the PIPS group than in the other groups (P<0.05). After the time was changed, the depth of infiltration of PUI increased only in the apical segment as the flushing time increased.
CONCLUSIONS
The PUI and PIPS methods facilitate the penetration of irrigation solution into the dentin canal in curved root canals, especially in the apical segment. The PIPS technique is effective in removing the smear layer in curved root canals.
Humans
;
Dental Pulp Cavity
;
Microscopy, Electron, Scanning
;
Root Canal Irrigants
;
Root Canal Preparation/methods*
;
Smear Layer
;
Sodium Hypochlorite
;
Therapeutic Irrigation/methods*
;
Double-Blind Method
9.Calcium hydroxide removal in curved root canals with apical transportation In Vitro.
Ying SONG ; Jing-zhi MA ; Ru-yan WANG ; Xue-dong ZHOU ; Ling ZOU ; Yuan GAO
Journal of Huazhong University of Science and Technology (Medical Sciences) 2014;34(4):608-611
Calcium hydroxide (CH) is applied to improve disinfection of root canals in most root canal retreatment. This study aimed to analyze the CH removal efficacy using 7 different root preparing files (K file, pre-curved K file, EndoActivator, Ultrasonic file, pre-curved ultrasonic file, F file and needle irrigation alone) with apical transportation. Standardized models of curved canal with such apical transportation or not were set up before applying CH to root canal for 7 days. Seven techniques described above were used for its removal. Then the roots were disassembled and digital photos were taken. The ratio of residual CH in the overall canal surface was calculated using the image analyzer image pro plus 6.0. The data were analyzed using one-way ANOVA with post hoc Tukey test. Results revealed that CH was effectively removed (P<0.05) by using all 6 mechanical methods except irrigation alone. In curved root canals with apical transportation, EndoActivator, pre-curved ultrasonic file and F file were found to be more effective in removing CH than the other four file (P<0.001), while there was no significant difference among EndoActivator, pre-curved ultrasonic file and F file groups (P>0.05). The percentage of residual CH in the canal with apical transportation was higher than that in the canal without apical transportation (P<0.05). In conclusion, CH can be hardly removed completely. Canal with apical transportation will result in insufficient CH removal. EndoActivator, pre-curved ultrasonic file and F file are more effective in the curved root canal with apical transportation.
Animals
;
Bone Cements
;
pharmacology
;
Calcium Hydroxide
;
pharmacology
;
Cattle
;
Dental Pulp Cavity
;
Disinfectants
;
pharmacology
;
Root Canal Preparation
;
methods
10.The correlation between the enlargement of root canal diameter and the fracture strength and the stress distribution of root.
Jun CHEN ; Lin YUE ; Jia-de WANG ; Xue-jun GAO
Chinese Journal of Stomatology 2006;41(11):661-663
OBJECTIVETo investigate the correlation between the extent of cutting of the root canal wall and the root fracture strength and the stress distribution.
METHODSFifteen pairs of root sections were into 3 groups with canal wall thickness of 1.00 mm, 0.75 mm and 0.50 mm respectively. The maximum load was tested required for fracture for each group through fracture test in a universal testing machine, and compared with that for the original canal. The stress and its distribution of the root with normal wall thickness (1.2 mm) and roots with 75%, 50% and 25% respectively of the normal wall thickness were examined by three-dimensional finite analysis. The maximum Von Mises stress of the root of each model was calculated.
RESULTSThe mean fracture strengths of the groups with canal wall thickness of 1.00 mm, 0.75 mm and 0.50 mm were (4 432.41 +/- 563.59) N, (4 137.43 +/- 680.29) N and (3 749.87 +/- 554.17) N respectively. The maximum load of fracture resistance is a linear function of the root canal wall thickness (r = 0.972, P < 0.001). The three-dimensional finite analysis revealed that the enlargement of root canal diameter brought on increase of stress of root canal wall, and the stress and its distribution altered with further decrease of the wall thickness. The stress of lateral loading was greater than that of vertical loading.
CONCLUSIONSThe results suggests that clinical root canal treatment should be designated to remove just the infected tissue and avoid over-cutting of the hard tissue.
Dental Pulp Cavity ; pathology ; physiopathology ; Dental Stress Analysis ; Finite Element Analysis ; Humans ; In Vitro Techniques ; Molar ; Root Canal Preparation ; methods ; Tooth Root ; pathology ; physiopathology