1.Functional palatoplasty with upper and back migration of levator veli palatini using mucosal flap of vomer
Rongtao YUAN ; Wei SHANG ; Zhiqin JIN
Journal of Practical Stomatology 1996;0(02):-
0.05 ), that in those treated by traditional palatoplasty 2 646, 2 557 and 2 539( P
2.Trigeminal neuralgia and jaw bone cavities: analysis of 45 cases
Ningyi LI ; Zhuang ZHANG ; Baodong ZHAO ; Rongtao YUAN
Chinese Journal of Tissue Engineering Research 2005;9(10):240-241
BACKGROUND: Odontogenic infection factor has been given much importance in the study of the etiology of secondary trigeminal neuralgia,and the theory of jaw bone cavities is proposed. OBJECTIVE: To study the relationship of the jaw bone cavities and the etiology of trigeminal neuralgia.DESIGN: A self-controlled trial.SETTING: Department of oral and maxillofacial surgery of a university hospital.PARTICIPANTS: The patients with the trigeminal neuralgia were treated in Department of Oral and Maxillofacial Surgery, Affiliated Hospital of the Medical College of Qingdao University from February 1994 to December 2003, from whom 45 were selected for this study, including 15 males and 30 females with altogether 74 jaw bone cavities.METHODS: Curettage of the jaw bone cavities was performed in these cases, and visual analogue scale(VAS) was adopted for evaluation of the postoperative pain.MAIN OUTCOME MEASURES: ① VAS; ② Pathological examination and bacteria culture of the specimens.RESULTS: Pain relief was achieved in 33 cases(73.3% ) after the first surgery and in 10 cases(22.2% ) after a second or third surgery. In 2 cases (4.5%), the pain was alleviated but medication was still needed for pain control. Pathological examinations in most cases identified predominantly in flammatory and granulation tissues.CONCLUSION: Jaw bone cavities may be one of the major etiologic factors of trigeminal neuragia.
3.In vitro osteoblastic differentiation and identification of rat bone marrow mesenchymal stem cells by whole bone marrow adherent culture
Binyu LIU ; Ningyi LI ; Gongwei FAN ; Rongtao YUAN ; Xiaoming JIN ; Liqiang CHEN
Chinese Journal of Tissue Engineering Research 2007;11(50):10181-10184
BACKGROUND: Many operations for isolating, purifying and identifying bone marrow mesenchymal stem calls (BMSCs) are complicated and cost much. Also they have great effect on cell activity. Whether whole bone marrow adherent culture can avoid above-mentioned disadvantages remains unclear. At present, many studies huve been done to confirm an effective and low cost method for isolating, purifying and identifying such cells.OBJECTIVE: This study is to in vitro induce and differentiate rat BMSCs by whole bone marrow adherent culture,and to identify the cells.DESIGN: A controlled observational experiment.SETTING: Qingdao University Medical College.MATERIALS: This study was carried out in the Laboratory of Oral Cavity and Laboratory of Molecular Biology (provincial level) Qingdao University Medical College between November 2005 and March 2007. Twenty Wistar rats of either gender, aged 3 to 4 weeks, of SPF grade, weighing 120-150 g, were provided by the Qingdao Laboratory Center. The protocol was carried out in accordance with animal ethics guidelines for the use and care of animals. Fetal bovine serum (FBS, Hangzhou Sijiqing Bioengineering Material Research Institute), alkaline phosphatase (ALP) kit (Nanjing Jiancheng Bioengineering Research Institute), reverse transcription kit (American Promega Corporation) and primer (Shanghai Bioengineering Co.,Ltd.) were used in this study.METHODS: Adult rat BMSCs were isolated and cultured by whole bone marrow adherent culture. They were digested with 2.5 g/L trypse and inoculated at a density of 5 ×107 L-1 in 6-well culture plate. Then, the cells were divided into experimental group and control group. Inducing culture medium was added to experimental group, and the same amount of basic culture medium was added to control group. ① Cell differentiation and calcium tuberculation were observed under the inverted microscope. ② Biological characteristics of induced cells were detected by calcium tubercle Von Kossa and alizarin Bordeaux. ③ALP activity was detected by diazo salt staining. ④Human core binding factor alpha subunit-1 (Cbf α-1), osteocalcin (OCN) and osteoblast-specific Osterix (OSX) mRNA expressions were detected by reverse transcription-polymerase chain reaction (RT-PCR).MAIN OUTCOME MEASURES: ① Induction and differentiation results of cells. ② Biological characteristics of cells induced by rat BMSCs. ③ ALP activity. ④ Cbf α-1, OCN and OSX expressions.RESULTS: ①Inducing culture medium was added in the serial subcultivation. About 9 days later, cell clones were connected to each other. On about 21 to 28 days, some pykno-round mineralized tubercles appeared. Meanwhile,control cells were connected to each other, but they did not form the tubercle. ② In the experimental group, when MSCs were induced for 21 to 28 days, obvious round or oval calcified tubercles were seen by naked eyes. The results of Von Kossa staining exhibited black sediments, and those of alizarin Bordeaux staining exhibited salmon tubercles. Calcium tubercles were not found in the control group. ③The ALP activity after 2 weeks of induction was obviously increased in the experimental group, but was relatively weak in the control group. ④In the experimental group,Cbf α-1, OCN and OSX expressions were significantly increased after induction.CONCLUSION: After being in vitro induced and differentiated by whole bone marrow adherent culture, rat BMSCs exhibited morphological and biological characteristics similar to typical osteoblasts.
4.Heterogeneous acellular dermal matrix patch for repair of oral mucosal defects in 71 patients
Lingfa XUE ; Wei SHANG ; Yuanyong FENG ; Xiaoming JIN ; Fengtong LIU ; Muyun JIA ; Rongtao YUAN ; Lingxue BU
Chinese Journal of Tissue Engineering Research 2010;14(16):3015-3018
BACKGROUND:Recently,acellular dermal matrix allograft has been widely used in the repair of oral mucosal defects.But little information is about the heterogeneous acellular dermal matrix (HADM) patch for repair of oral mucosal defects.OBJECTIVE:To investigate the efficacy and biosafety of HADM in the repair of oral mucosal defects.METHODS:In total 71 patients with oral benign or malignant tumors who had oral mucosal or soft tissue defects following tumorectomy were included in this study.These patients comprised 37 males and 34 females,and were averaged 45 years (range,20-70 years old).Of them,42 suffered from benign tumors and 29 from malignant tumors.HADM patches were used for repair of oral mucosal defects.The survival,color,and texture of HADM patches were observed.Shrinkage rate of HADM patches was compared between regions without supports from hard tissues (cheeks,tongue,and mouth floor) and with supports from hard tissues (gingiva,hard palate).RESULTS AND CONCLUSION:All 71 HADM completely survived.No necrosis and infection occurred.At 2 weeks after transplantation,(98.20±5.20) % of patch area survived.At 3 months after transplantation,patches showed similar color to surrounding oral mucosa and most patients had sense of tension to different extents.At 6 months after transplantation,cell creeping substitution and vasculadzation were successfully accomplished in the region of patch transplantation.Patches grew stably,with smooth pink appearance and good elasticity,and no further shdnkage.Patients felt normal.HADM patch shrank primarily at 2 weeks-1 month after transplantation,and tended to be stable at 3 months.There was no significant difference in tissue morphology between surgical region and normal tissue.The HADM shdnkage rate was significantly higher in regions without supports from hard tissues than regions with supports from hard tissues.These findings indicate that HADM patches have advantages in repair of oral mucosal defects including good histocompatibility,wide source,simple manipulation,and able to cover the wound surface in the early state,promote wound surface healing,and reduce scar formation,and can be used as an ideal matedal for repair of oral mucosal defects.
5.The value of 3D print technique in the precious reconstruction of the defects and malformations of maxillofacial bone
Guanghui YANG ; Rongtao YUAN ; Jing WANG ; Yanshan LIU ; Muyun JIA ; Qian DONG
Journal of Practical Stomatology 2017;33(4):492-495
Objective:To study the value of 3D print technique in the reconstruction of the defects and malformations of oral and maxillofacial bone.Methods:6 cases with defects and malformations of oral and maxillofacial bone were examined by CT scanning,treated by the implantation of 3D printed implants.Results:Before operation,3D printed model clearly showed the status of the defects and malformations for the precious preoperative implant shaping.The implants for the reconstruction were prepared by 3D print techinique.Perfect reconstruction of the defects was achieved.Conclusion:3 D printing technology exerts promising values in the precious and effective reconstruction of the defects and malformations of maxillofacial bones.
6.Conical beam CT measurement of alveolar bone structure remodeling in patients with skeletal class Ⅲ malocclusion after orthodontic-orthognathic treatment
Qihang ZHAO ; Xin LU ; Lei TONG ; Yonghui SHANG ; Shuai LI ; Wen LIU ; Jianhua ZHOU ; Rongtao YUAN ; Qingyuan GUO
Chinese Journal of Tissue Engineering Research 2024;28(23):3729-3735
BACKGROUND:Most of the studies on combined orthodontic-orthognathic treatment of skeletal class Ⅲ malocclusions have focused on the improvement of the patient's lateral appearance and recovery in the later stages of the treatment,while there are fewer studies observing the microcosmic nature of the alveolar bone remodeling of the lower anterior teeth. OBJECTIVE:To evaluate the therapeutic effect of lower anterior tooth decompensation and alveolar bone remodeling in patients with skeletal class Ⅲ malocclusion before and after orthodontic-orthognathic treatment based on oral X-ray lateral films and oral cone-beam CT. METHODS:From January 2015 to May 2023,15 patients with skeletal class Ⅲ malocclusion who underwent orthodontic-orthognathic surgery at Qingdao Hospital of Rehabilitation University were enrolled.All patients underwent lateral cephalography and cone beam computed tomography before and after treatment.Cephalometric measurement items related to the angle and line distance,lip/lingual bone cracking length(d-La/d-Li)and bone cracking/bone fenestration of the lower anterior teeth before and after treatment were measured. RESULTS AND CONCLUSION:Lateral X-ray films showed that the amount of alveolar bone remodeling after decompensation of the lower anterior teeth showed significant changes compared to before treatment.The root of the tooth moved significantly towards the center of the alveolar bone,and the specific data was closer to normal data,but there were still some differences compared with normal individuals.Based on the cone-beam CT measurement,the bone cracking/bone fenestration length and width of the alveolar bone were improved in almost all the teeth after orthodontic-orthognathic combined treatment,alveolar bone remodeling in some teeth even reached the level of healthy individuals.Before treatment,most patients often experienced bone fenestration/cracking on the lip/lingual side of the lower incisor due to compensatory tooth growth.However,during the preoperative orthodontic stage,decompensation triggered alveolar bone remodeling and significant changes in tooth angle.Preoperative orthodontic treatment caused the upper anterior teeth to retract and the lower anterior teeth to tilt and control the root,but the amount of decompensation before surgery was often insufficient.In the orthognathic surgery stage,the jaw was removed through the positioning guide plate,the maxilla moved forward,and the mandible retreated.During the postoperative orthodontic process,the effect of fine adjustment was better.Although there is a certain degree of recurrence trend in the position of teeth and jawbones,the postoperative orthodontic treatment is closer to the normal value.