Objective Using coded harmonic angiography to observe hepatocellular carcinoma blood perfusion features,further assess this modality clinical value in qualitative diagnosis of liver malignant tumor.Methods Through left forearm vein bolus injection of fluorine-carbon contrast agent,35 patients with 41 hepatocellular carcinoma lesions were examined with coded harmonic angiography,intratumoral vessel enhanced time,vascularity,blood perfusion were observed.All patients were simultaneously videotaped before and after contrast.Results It was about 15～20 s after the injection of contrast agent when the enhancement of tumor had just commenced,peak time about 60～90 s and persistence time about 240～300 s.Lesions were more obviously enhanced than normal liver tissue,several tumor vascularity was displayed from border to center,contrast agent gradually centripetal filled-in,formed "weeping-willow" echo.Pressed and rimlike peripheral vessel developments were earlier than normal liver tissue.Conclusions Coded harmonic angiography could real-timely display hepatocellular carcinoma blood perfusion,which has an important clinical value in qualitative diagnosis of liver malignant tumor.

Objective To investigate the electrocardiographic(ECG) characteristics and assess the safety of radiofrequency catheter ablation (RFCA) of ventricular tachyeardia (VT), and frequent ventricular premature con- tractious(VPCs) originating from left ventricular outflow tract(LVOT). Methods Twelve-lead ECG analysis and RFCA were performed in 9 patient with VT or VPCs originating from LVOT. Results The sites to be successfully ablated were in left valsalva sinus in 6 patients,and subaortic valve in 3 patient. ECG revealed tall R wave in leads Ⅱ, Ⅲ ,aVF, V5 and V6. QS morphology in both leads aVR and aVL,QS morphology in lead Ⅰ in most cases. R wave in lead Ⅰ was relative tall, the R/S wave amplitude in lead V1 was over 0.62 ,and precordia R wave transition was irregular. All 9 patients were successfully ablated. No death or recurrenced case during follow-up. Conclusion Ventricular taehycardia and frequent ventricular premature rcontractions originating from left ventricutar outflow tract could be known by some specific ECG characteristics and could be radically treated safely by RFCA.

This study aimed at comparing the United States, Britain, Australia, the Netherlands and China’s national performance evaluation, and sum up the experience to provide a theoretical basis for the China’s development of hospital performance evaluation system. The study found that China needs to consider the patient's perspective, to establish a fixed third-party performance evaluation agencies, establish an effective incentive mechanism and feedback mechanism and combine a variety of assessment methods in the development of hospital performance evaluation index system.

Objective To study the importance of radial height restoration in the type C distal radial fractures and selection of therapeutic method.Methods Sixty-one cases of type C distal radial fractures in the department of joint orthopedics and traumatic orthopedics of affiliated traumatic and orthopedic hospital of Guangzhou university of Chinese medicine from June 2013 to September 2015 were retrospectively analyzed, including 34 cases of C1 type,14 cases of C2 type and 13 cases of C3 type according to the AO/ASIF fracture classification, the cases were divided into the manual reduction and splint external fixation group (27 cases), external fixator group (18 cases) and plate screw internal fixation group (16 cases).The radial height, palm inclination angle, ulnar inclination angle and Gartland-Werley (G-W) score after treatment were compared among various groups.Results Fifty-eight cases were followed up.The radial height, ulnar inclination angle and G-W score had statistical difference among 3 groups (P<0.05), while the palm inclination angle had no statistical difference among 3 groups (P>0.05);the difference of radial height and ulnar inclination angle between the external fixator group and plate screw internal fixation group had no statistical significance (P>0.05), but there were statistically significant differences when these two groups were compared with the manual reduction and splint external fixation group respectively (P<0.05).The G-W score had no statistical difference between the manual reduction splint fixation group and the external fixator group (P>0.05) , but there were statistically significant differences when these two groups were compared with the the plate screw internal fixation group respectively (P<0.05).Conclusion The radial height restoration may better recovery ulnar inclination angle and improve the joint function.

BACKGROUND:Distal radius C fractures belong to multiple fractures in the joint. Its treatment should recover various angles and joint surface continuity outside the joint. The recovery of palmar tilt angle, radial inclination angle and radial height is also very important for treating distal radius. OBJECTIVE:To study the changes in palmar tilt angle, radial inclination angle and radial height after type C fractures of the distal radius repaired with Acu-Loc(R)2 VDR bone plate system. METHODS:From May 2015 to March 2016, 11 cases of type C distal radial fractures were treated with Acu-Loc(R)2 VDR bone plate system. Preoperatively, the palmar tilt angle was-31° to-4° (-12.45° on average), and the radial inclination angle was 6° to 18° (11.18° on average), and the radial height was 1.92 mm to 8.68 mm (5.28 mm on average). X-ray films were observed at postoperative 4, 8 and 12 weeks and half a year in all patients. Palmar tilt angle, radial inclination angle and radial height were measured and observed using anteroposterior and lateral X-ray films during final follow-up. Wrist function was assessed with Gartland-Werley score. RESULTS AND CONCLUSION:(1) 11 patients were followed and the postoperative follow-up ranged from 7 months to 15 months. X-ray films showed that the union of fractures was achieved in 6-8 weeks (6.5 weeks on average). No infection or internal fixation failure occurred. The articular facets were smooth in 10 patients and a little poor was found in 1 case (<2 mm). (2) After operation, the palmar tilt angle was 8° to 15° (11.55° on average) (P<0.05);the radial inclination angle was 22° to 27° (23.18° on average) (P<0.05);the radial height was 8.01 mm to 13 mm (11.03 mm on average) (P<0.05). (3) The results were excellent in 8 cases, good in 2 cases, and poor in 1 cases according to Gartland-Werley wrist function assessment;the excellent and good rate was 91%. (4) Acu-Loc(R)2 VDR bone plate fixation can provide reliable fixation and effective support for type C distal radius fractures, which can recover the palmar tilt angle, the radial inclination angle and the radial height, so the Acu-Loc(R)2 VDR bone plate is an ideal method to treat type C fractures of the distal radius.

Objective To evaluate the feasibility and accuracy of three-dimensional ultrasound-ultrasound (3DUS-US)automatic image fusion technology based on electromagnetic positioning.Methods The experimental phantom was constructed to acquire ultrasonic images by agarose gel and additives,which was used as the experimental object.3DUS imaging with free-hand and real-time ultrasound imaging automatic registrations were performed based on electromagnetic positioning.To investigate the effect of 3DUS-US image fusion under different scanning speed by free-hand,the fast and slow groups were designed. In addition,a junior operator and a senior operator performed 3DUS-US automatic registrations,and recorded the operating time and registration error,respectively.The repeatability between two operators was analyzed.Results The macroscopic appearance,stability and ultrasonic image of the phantom met the demand of this research.The success rate of 3DUS-US automatic image fusion technology was 100%(40/40).The slow group's registration error distance was (1 .44 ± 0.64)mm,which was obviously lower than the fast group's (2.56±0.53)mm,the difference was statistically significant (P <0.001).There were no statistically differences of the registration error and operating time between the two operators (P =0.508,P = 0.5 1 7 ).Conclusions The technology of 3DUS-US automatic registration based on electromagnetic positioning was feasible and accurate,which is worth applying into the clinical treatment.

Objective To prepare PET molecular probe folate-NOTA-Al18F(18F-FNA) and to explore its feasibility as an imaging agent in folate receptor positive KB tumor.Methods 18F-FNA was prepared by the method of aluminum fluoride coordination labeling, and the effect of phase transfer catalyst K2.2.2 on the labeling yield was evaluated.Biological distribution was carried out at 10, 30 and 90 min after injection of 3.7 MBq 18F-FNA in nude mice (n=20) xenografted with KB tumor, and the radioactive uptake (%ID/g) and T/NT ratios were then calculated in different organs or tissues.MicroPET imaging was performed at 40 min after injection of 18F-FNA (3.7 MBq).Results The labeling yield of 18F-FNA increased with the presence of K2.2.2.The radiochemical yield was above 98%.The radiochemical purity was above 99%, and still above 98% after maintained in PBS and FBS at 37 ℃ for 4 h.The biodistribution showed that the blood clearance of the probe was slow, and the uptakes in kidneys and tumor which overexpressed folate receptor were significantly high ((5.12±0.58) %ID/g and (1.37±0.20) %ID/g).The high radioactive uptake was observed in KB xenografted mice using microPET imaging.Conclusions The labeling yield of 18F-FNA could increase with the presence of K2.2.2.Furthermore, the encouraging biological distribution and microPET imaging results indicate that 18F-FNA may be a candidate for PET imaging in targeting folate receptor.

The paper described the development stages of a hospital performance evaluation scale based on patient experience.An empirical application on 7 856 patients of 26 hospitals in four provinces in the country identified the challenges encountered in the course of its application.These include limits of patients experience,variations on the experience reports incurred by different services experienced by patients,and setting of the patient-inpatient ratio among others.Solutions proposed based on these studies aim at creating a patient experience scale tailored to Chinese patients.

Objective To investigate the role of intra-operative and percutaneous three-dimensional contrast-enhanced ultrasonic cholangiography (3D-CEUSC) in the diagnosis of biliary anomalies. Methods Diluted SonoVue, an ultrasonic contrast agent, was injected into the cystic duct of 13 living liver donors via a cannula for intra-operative 3D-CEUSC, while injection via a T tube or a PTCD tube were done in 14 patients for percutaneous 3D-CEUSC. The maximum branching order of the intra-hepatic bile ducts, the percentages of display of the first-, second-, and third-order intra-hepatic bile ducts, and the rates of detection of biliary anatomical anomalies were evaluated. Results The median of the maximum branching order of the intra-hepatic bile ducts shown was fourth-order on intraoperative 3D-CEUSC and third-order on percutaneous 3D-CEUSC, respectively. The difference was significant (P=0.01). From the first- to the third-order of intra-hepatic bile ducts, the percentages of display for intra-operative 3D-CEUSC were 100% (23/23), 96.2% (50/52) and 82.7% (86/104),respectively, while they were 100% (24/24), 94.6% (54/56) and 60. 7% (68/112) for percutaneous 3D-CEUSC. The differences were not significant when comparing the first- and the second-order branches of intra-hepatic bile ducts as shown either on intra-operative or percutaneous 3D-CEUSC (P=1).The percentages of display of the third-order branches using intra-operative 3D-CEUSC was higher than that of percutaneous 3D-CEUSC (P＜0. 0001). Three biliary anatomical anomalies were detected by intra-operative 3D-CEUSC and 4 anomalies were detected by percutaneous 3D-CEUSC. All of these anomalies were confirmed by X-ray cholangiography. Conclusion Both intra-operative and percutaneous 3D-CEUSC could diagnose biliary anatomical anomalies accurately. These procedures may become important techniques to evaluate the biliary anatomy in hepatobiliary surgery pre-operatively or intraoperatively.

Objective To assess the safety and effectiveness of artificial ascites assisted thermal ablation for hepatic tumors adjacent to the gastrointestinal tract in patients with a history of abdominal surgery . Methods Thirty‐two patients (33 lesions located adjacent to the gastrointestinal tract) with a history of abdominal surgery were included in the study . Method ① :normal saline was injected into abdominal cavity to form water insulation band between liver and gastrointestinal tract . Method② :normal saline was injected with appropriate pressure to form local water insulation band between the liver and gastrointestinal tract . Method③ :normal saline was injected continuously at the interval between liver and gastrointestinal tract to flush away heat energy caused by ablation . All the patients were checked for gastrointestinal tract injury after ablation . During one month after ablation ,CT /MR was performed to evaluate whether the lesions were completely ablated . Results Respectively ,the numbers of lesion received method ① ,② and ③ were 27(81 .8% ) ,4(12 .1% ) and 2(6 .1% ) ,while the usage of normal saline were 400~2 000 ml ,600~800 ml and 1 000~1 500 ml . No gastrointestinal tract injury occurred . CT/MR scan during one month after ablation showed that all the 33 lesions had been completely ablated . Conclusions In patients with a history of abdominal surgery ,artificial ascites is a safe and effective method in assistance of thermal ablation for hepatic tumors adjacent to the gastrointestinal tract .