1.The amounts and speed of polymerization shrinkage and microhardness in LED cured composites.
Sung Ho PARK ; Su Sun KIM ; Yong Sik CHO ; Soon Young LEE ; Do Hyun KIM ; Yong Joo JANG ; Hyun Sung MUN ; Jung Won SEO ; Byung Duk NOH
Journal of Korean Academy of Conservative Dentistry 2003;28(4):354-359
This study evaluated the effectiveness of the light emitting diode(LED) units for composite curing. To compare its effectiveness with conventional quartz tungsten halogen (QTH) light curing unit, the microhardness of 2mm composite, Z250, which had been light cured by the LEDs (Ultralume LED2, FreeLight, Developing product D1) or QTH (XL 3000) were compared on the upper and lower surface. One way ANOVA with Tukey and Paired t-test was used at 95% levels of confidence. In addition, the amount of linear polymerization shrinkage was compared between composites which were light cured by QTH or LEDs using a custom-made linometer in 10s and 60s of light curing, and the amount of linear polymerization shrinkage was compared by one way ANOVA with Tukey. The amount of polymerization shrinkage at 10s was XL3000 > Ultralume 2, 40, 60> FreeLight, D1 (P<0.05) The amount of polymerization shrinkage at 60s was XL3000 > Ultralume 2, 60> Ultralume 2,40> FreeLight, D1 (P<0.05) It was concluded that the LEDs produced lower polymerization shrinkage in 10s and 60s compared with QTH unit. In addition, the microhardness of samples which had been cured with LEDs was lower on the lower surfaces than the upper surfaces whereas there was no difference in QTH cured samples.
Polymerization*
;
Polymers*
;
Quartz
;
Tungsten
3.Mechanical Properties of Quartz Fiber Post.
The Journal of Korean Academy of Prosthodontics 2002;40(1):68-78
The post core system has been used for reconstructon of severely damaged crown by caries or trauma.But problems such as crown exfoliation,post core fracture and root fracture have been reported. Ideal mechanical properties of the post require high fracture strength,high elastic limit and high resistance against fatigue and corrosion.Modulus of elasticity of the post should be similar with that of dentine.Low hardness is also required for the convenience of post removal in failure.Furthermore, the post itself must be translucent for the esthetical purpose.Several types of the post have been developed to satisfy the criteria above mentioned. The purpose of this study was to find out the mechanical properties of quartz fiber post by comparing with those of gold post and zirconia post. The results of this study were as follows : 1.Maximal fracture strength and stiffness of quartz fiber post were similar with those of gold post and zirconia post. 2.Young's modulus and hardness of quartz fiber post were lower than those of gold post and zirconia post. Mechanical property of quartz fiber post against post fracture was similar with that of gold post and zirconia post.Mechanical property of quartz fiber post against root fracture was higher than that of gold post and zirconia post.Quartz fiber post could be removed easily due to low hardness.
Crowns
;
Elastic Modulus
;
Elasticity
;
Fatigue
;
Hardness
;
Quartz*
4.Comparison of linear polymerization shrinkage in composites and compomer polymerized by plasma arc or conventional visible light curing.
Journal of Korean Academy of Conservative Dentistry 2002;27(5):488-492
The purpose of this study was to evaluate the effectiveness of plasma arc curing (PAC) unit for composite and compomer curing. To compare its effectiveness with conventional quartz tungsten halogen (QTH) light curing unit, the polymerization shrinkage rates and amounts of three composites (Z100, Z250, Synergy Duo Shade) and one compomer, that had been light cured by PAC unit or QTH unit, was compared using a custome made linometer. The measurement of polymerization shrinkage was performed after polymerization with either QTH unit or PAC unit. In case of curing with the PAC unit, the composite was light cured with Apollo 95E for 6s, the power density of which was recorded as 1350 mW/cm2 by Coltolux Light Meter. For light curing with QTH unit, the composite was light cured for 30s with the XL2500, the power density of which was recorded as 800 mW/cm2 by Coltolux Light Meter. The amount of linear polymerization shrinkage was recorded in the computer every 0.5s for 60s. Ten measurements were made for each material. The amount of linear polymerization shrinkage for each material in 10s and 60s which were cured with PAC or QTH unit were compared with t test. The amount of polymerization shrinkage in the tested materials were compared with 1way ANOVA with Duncan's multiple range test. As for the amounts of polymerization shrinkage in 60s, there was no difference between PAC unit and QTH unit in Z250 and Synergy Duo Shade. In Z100 and Dyract AP, it was lower when it was cured with PAC unit than when it was cured with QTH unit (p<0.05). As for the amounts of polymerization shrinkage in 10s, there was no difference between PAC unit and QTH unit in Z100 and Dyract AP. The amounts of polymerization shrinkage was significantly higher when it was cured with PAC unit in Z250 and Synergy Duo Shade (p<0.05). The amounts of polymerization shrinkage in the tested materials when they were cured with QTH unit were Z250 (6.6um) < Z100 (9.3um), Dyract AP (9.7um) < Synergy Duo Shade (11.2um) (p<0.05). The amount of polymerization shrinkage when the materials were cured with PAC unit were Dyract AP (5.6um) < Z100 (8.1um), Z250(7.0um) < Synergy Duo Shade (11.2um) (p<0.05).
Compomers
;
Light
;
Plasma
;
Polymerization
;
Polymers
;
Quartz
;
Tungsten
5.Validation of a method for the determination of thiocyanate in human plasma by UV/VIS spectrophotometry and application to a Phase I clinical trial of GDC-0425.
Young G SHIN ; Henri MEIJERING ; Fred H VAN HEUVELN ; Jaap WIELING ; Jason HALLADAY ; Srikumar SAHASRANAMAN ; Cornelis E C A HOP
Translational and Clinical Pharmacology 2015;23(2):59-65
The development and validation of a method for the determination of concentrations of thiocyanate in human plasma are described here. A modified colorimetric method of Bowler was used with the following alteration in Monica Manual, Part III. In order to obtain the same sensitivity in low amounts of clinical samples, quartz SUPRASIL(R) micro cuvettes have been used. The quantitation range was between 25-500 microM. Accuracy and precision of the quality control samples, linearity of the calibration curve, dilution, spike recovery and stability under various conditions were evaluated in the validation of the method and all demonstrated acceptable results. All validation results met good laboratory practice acceptance and FDA requirements to be acceptable for application in clinical trials. The validated method has been used for a Phase I clinical study in cancer patients orally administered with either 60 mg or 80 mg of GDC-0425 containing a cyanide (CN-) group. The thiocyanate levels from patients before and after drug administration showed no clinically significant differences.
Calibration
;
Humans*
;
Plasma*
;
Quality Control
;
Quartz
;
Spectrophotometry*
6.Autoregulation of Quartz-induced iNOS by iNOS-derived Hydrogen Peroxide in Rat2 Fibroblast.
Kyoung Ah KIM ; Hae Yun NAM ; Je Hyeok MUN ; Jin Sook JEONG ; Young LIM ; Chee Kyung CHUNG
Korean Journal of Occupational and Environmental Medicine 2001;13(4):385-392
OBJECTIVES: This study was performed in order to investigate the molecular mechanism regulating nitric oxide synthase(NOS) induced by alpha-quartz in Rat2 fibroblast. METHODS: alpha-quartz-induced nitric oxide(NO) and H2O2 formation and alpha- quartz-induced iNOS protein expression in Rat2 fibroblast were monitored. With iNOS inhibitor(L-N6- (1-iminoethyl)lysine hydrochloride, L-NIL) or antioxidant(catalase), we observed NO and H2O2 formation and iNOS protein expression in Rat2 fibroblast stimulated with alpha-quartz. RESULTS: alpha-quartz stimulated iNOS-induced NO and H2O2 formation in Rat2 fibroblast. L-NIL inhibited H2O2 formation and iNOS protein expression by alpha-quartz in Rat2 fibroblast. Pretreatment with catalase blocked the autoinhibitory pathway of iNOS by iNOSinduced H2O2, therefore H2O2 and NO production and iNOS protein expression were increased in Rat2 fibrobalst stimulated with alpha-quartz CONCLUSIONS: alpha-quartz-induced iNOS stimulated H2O2 formation in Rat2 fibroblast. INOS-induced H2O2 by alpha-quartz plays an important role in the autoinhibition pathway for regulating the iNOS function in Rat2 fibroblast
Catalase
;
Fibroblasts*
;
Homeostasis*
;
Hydrogen Peroxide*
;
Hydrogen*
;
Nitric Oxide
;
Quartz
7.Quartz Concentration and Respirable Dust of Coal Mines in Taeback and Kangneung Areas.
Ho Chun CHOI ; Yong Hee CHEON ; Young No YOON ; Hae Jeong KIM
Korean Journal of Preventive Medicine 1987;20(2):261-269
In order to investigate working conditions of underground coal mines, this work was undertaken to evaluate the respirable dust and the concentration of quartz in Taeback and Kangneung areas. The concentration of quartz was determined by Fourier Transform Infrared Spectrophotometry. The results were as follows; 1) The concentration of respirable dust of drilling and coal face in Taeback and Kangneung areas were as followed. 2) Distribution of respirable dust was well fitted to the long-normal distribution and geometric mean value was log(-1) 0.37+/-log(-1) 0.47 (2.34+/-2.95) mg/m3. 3) The difference of respirable dust concentrations in Taeback and Kangneung areas was not significant statistically (p>0.05). 4) The concentration of quartz of drilling and coal face in Taeback and Kangneung areas were as followed. 5) Distribution of quartz concentrations was well fitted to the log-normal distribution and geometric mean value was log(-1) 0.33+/-log(-1) 0.45 (2.14+/-2.82)%. 6) The difference of quartz concentrations in Taeback and Kangneung areas was not significant (p>0.05), but significant at drilling sites and coal faces (p<0.05).
Coal*
;
Dust*
;
Fourier Analysis
;
Gangwon-do*
;
Quartz*
;
Spectrophotometry, Infrared
8.Dental fiber-post resin base material: a review.
Aashwini LAMICHHANE ; Chun XU ; Fu Qiang ZHANG
The Journal of Advanced Prosthodontics 2014;6(1):60-65
Teeth that have short clinical crown, which are not alone enough to support the definitive restoration can be best treated using the post and core system. The advantages of fiber post over conventional metallic post materials have led to its wide acceptance. In addition to that the combination of aesthetic and mechanical benefits of fiber post has provided it with a rise in the field of dentistry. Also the results obtained from some clinical trials have encouraged the clinicians to use the fiber posts confidently. Fiber posts are manufactured from pre-stretched fibers impregnated within a resin matrix. The fibers could that be of carbon, glass/silica, and quartz, whereas Epoxy and bis-GMA are the most widely used resin bases. But recently studies are also found to be going on for polyimide as possible material for the fiber post resin base as a substitute for the conventional materials.
Bisphenol A-Glycidyl Methacrylate
;
Carbon
;
Crowns
;
Dentin
;
Dentistry
;
Quartz
;
Tooth
9.Quantitative Analysis of Quartz, Mica, and Feldspar in Respirable Coalmine Dust in Taebaek Area by Fourier Transform Infrared Spectrophotometry.
Ho Chun CHOI ; Yong Hee CHEON ; Hae Jeong KIM ; Jeong Joo LEE
Korean Journal of Preventive Medicine 1988;21(2):271-283
A Fourier transform infrared spectrophotometric method was described for the determination of quartz, mica(sericite) and feldspar(potassium feldspar) in respirable dust in Taebaek area. The results were as follows; 1) The concentration of minerals were determined from the intensity of absorption peak of quartz at 799 cm-1, sericite at 539 cm-1, and potassium feldspar at 648 cm-1 respectively. 2) The precision(C. V. %) for the quartz determination was 7.70+/-2.68 % from 10 to 200 microgram of quartz. 3) The precision for the sericite determination was 16.34+/-6.82 % from 30 to 500 microgram of serictite. 4) The precision for the potassium feldspar determination was 5.28+/-1.74 % from 30 to 500 microgram of potassium feldspar. 5) The concentration of respirable dust in Taebaek area was 4.90+/-3.29 mg/m3(0.4-93.7%), percent quartz was 1.80+/-4.14% (0.01-20.56%), percent sericite was 11.37+/-6.43% (0.00-29.69%), percent potassium feldspar was 8.15 % (n=7, 3.41-19.70%). 6) The difference of respirable coal dust, quartz, and sericite concentration in drilling, coal cutting, hauling and separating was significant respectively (p<0.05).
Absorption
;
Coal
;
Dust*
;
Fourier Analysis*
;
Minerals
;
Potassium
;
Quartz*
;
Spectrophotometry, Infrared*
10.Development of a piezoelectric sensor for detection of low endotoxin concentration.
Xingliang XIONG ; Xiang WANG ; Shaoxi CAI
Journal of Biomedical Engineering 2005;22(5):1040-1044
Endotoxin is an important factor which can lead to endotoxemia and complication. Accurate detection of its concentration is very useful for the diagnosis and treatment of these diseases. A piezoelectric biosensor for detecting endotoxin was developed, which was based on liquid damping effect of quartz crystal resonator. The test results showed that the maximal frequency shift of sensor is linearly dependent on the logarithm value of concentration of endotoxin (0.1 pg/m - 10 ng/ml). The time which d (deltaf)/dt(maax) appeared in frequency shift curve was also linearly dependent on the logarithm value of concentration of endotoxin (0.01 pg/ml - 10 ng/ml). The detection time was shortened and the minimal limit of detection was decreased using the second method. Thus the proposed sensor is much simpler, more precise and has more lower limit of detecting detection of endotoxin when compared with the conventional methods.
Animals
;
Biosensing Techniques
;
instrumentation
;
Endotoxins
;
analysis
;
Equipment Design
;
Quartz
;
Rabbits