Objective: To optimize the extraction process of total flavonoids from Oxytropis falcata bunge.Methods: With the content of total flavonoids as the index,and based on the results of single factor tests, central composite design-response surface methodology was adopted to optimize the extraction technology with the solvent amount, ethanol concentration and extraction time as the factors.Results: The optimal extraction conditions were as follows: extracted twice with 20-fold amount of 66% ethanol, and 84 minute per time.Under the above conditions, the extraction rate of total flavonoids was up to 23.21 mg·g-1.Conclusion: The central composite design-response surface methodology is convenient and highly predictive for the extraction optimization of total flavonoids from oxytropis falcata bunge.

Objective To prepare insulin thiolated hyaluronic acid nanoparticles (Ins-HA-Cys-NPs)and study its physicochemical properties. Methods The Ins-HA-Cys-NPs was prepared by ultrasonic emulsifying method,and the properties of nanoparticles including morphology,mean diameter,Zeta potential,entrapment efficiency and drug loading efficiency were studied,as well as the cryoprotectant selection.Results The prepared nanoparticles was round in appearance and the mean diameter was(178.5 ±0.8)nm,the polydispersity index was (0.214 ±0.013)and the Zeta potential was -(38.47 ±0.46 )mV,while the entrapment efficiency was (48.85 ±0.66 )%,drug loading efficiency was (4.79 ±0.13 )%;10%mannitol as cryoprotectant provided uniform and well dispersed suspension of nanoparticles with blue opalescence after redispersion.Conclusion The thiolated hyaluronic acid nanoparticles may be used as the carrier for oral drug delivery system of insulin,and it provides a basis for studies on rats in vivo.

Objective This article reviewed the moisture‐proof strategies of Chinese meteria medica preparation to pro‐vide a basis for quality control of traditional Chinese medicine .Methods Review ,analyze and summarize through referring to relevant literatures in recent years .Results The hygroscopicity of Chinese meteria medica preparation can be influnced by ex‐tractive techniques ,auxiliary material and application of film coating .Conclution Study on techniques of Chinese meteria med‐ica preparation needs further in‐depth investigation .

Objective To establish the quality control standards for Compound caulis Polygoni multiflori mixture .Meth-ods Caulis polygoni multiflori ,cortex alibiziae and schisand chinensis were identified by TLC ,total flavonoids were deter-mined by UV .Results Caulis polygoni multiflori ,cortex alibiziae and schisand chinensis could be detected by TLC .A better linear relationship between concentration and absorbance in the range of 9 .12~27 .36 μg/ml .The linear regression equation was A=0 .034 55 C-0 .110 34 (r=0 .999 2) ,The average recovery of emodin was 101 .0% (RSD=1 .58% ) .Conclusion The method is simple ,quick ,accurate and sensitive ,which could be used as a quantitative analysis method for this preparation .

Objective To optimize the prescription and preparation technology of finasteride dispersible tablets .Methods Wet granulation technique was applied to optimize the formulation and technology of finasteride tablets .Results The formulation of fi-nasteride tablets was that microcrystalline cellulose and lactose acts as diluent , 5% of low-substituted hydroxypropyl cellulose acts as disintegrant , 5%of povidone in alcohol water mixture acts as adhesive and 15%of opadry 85 G type acts as coating solution .The per-centage of dissolution was more than 90%in 45 miniutes.Conclusion The self-made finasteride tablets had stable quality , reliable process and were suitable for industrialized mass production .

Objective:To optimize the ultrasonic extraction process of total alkaloids from Oxytropis falcata bunge. Methods:The independent variables were solvents ratio, extracting time and ethanol concentration, and the dependent variable was content of total al-kaloids. Based on single factor tests, central composite design and response surface methodology was adopted to optimize the extraction technology. Results:The optimal extraction conditions were as follows: extracted twice with 36-fold amount of 72% ethanol ( contai-ning 1% acetic acid) at 60 ℃, and extracted 77 minutes each time. Under the above conditions, the content of total alkaloids was 2. 793 mg·g-1 with the bias ratio less than 2% when compared with the model predictions. Conclusion:Ultrasonic extraction process of total alkaloids from Oxytropis falcata Bunge optimized by central composite design and response surface method is simple, highly pre-cise, reliable and predictable.

Objective:To compare the efficacy between dual stability constructs and modified Scott techniques for treatment of symptomatic spondylolysis in active adolescents.Methods:A retrospective study was conducted to analyze the clinical date of 64 active adolescents who had been treated for symptomatic spondylolysis at Department of Orthopedic Surgery, The 900th Hospital of Joint Logistic Support Force from January 2017 to October 2021. There were 59 males and 5 females with an age of (24.9±5.2) years. Responsible vertebral bodies were L 3 in 2 cases, L 4 in 10 cases, L 5 in 47 cases, and L 4 to L 5 in 5 cases; spondylolisthesis was accompanied in 9 cases. Depending on the surgical methods, the patients were divided into a dual stability constructs (pedicle screws and laminar screws) group (observation group, 31 cases) and a modified Scott group (control group, 33 cases). The 2 groups were compared in terms of operative time, bleeding volume, postoperative drainage volume, isthmus healing rate, rate of internal fixation failure, visual analogue scale (VAS) for low back pain, Japanese Orthopaedic Association (JOA) score and the good and excellent rate by JOA at postoperative 1 month, 3 months, and the last follow-up, and the incidence of complications. Results:There was no statistically significant difference in the preoperative general data between the 2 groups, indicating comparability ( P>0.05). All patients were followed up. The operation time in the observation group [(94.7±14.9) min] was significantly longer than that in the control group [(84.4±16.4) min] ( P=0.011), but there was no significant difference in intraoperative bleeding volume or postoperative drainage volume ( P>0.05). The healing rate of bilateral isthmi in the observation group was 93.5% (29/31), significantly higher than that in the control group [60.6% (20/33)], and the rate of internal fixation failure in the observation group (0) was significantly lower than that in the control group (12.1%, 4/33) ( P<0.05). At postoperative 1 month, 3 months, and the last follow-up, the VAS scores were significantly lower than the preoperative value in all patients while the JOA scores significantly higher ( P<0.05). At the last follow-up, in the observation group the VAS score [0 (0, 1.0)] was significantly lower than that in the control group [1(0, 2)], and the JOA score [(27.1±1.2) points] and the excellent and good rate by JOA [93.5% (29/31)] were significantly higher than those in the control group [(25.7±2.1) points and 75.8% (25/33)] ( P<0.05). In the control group, follow-ups revealed internal fixation failure in 4 cases due to the cable cutting out of the spinous processes, yielding a failure rate of 12.1%, while no internal fixation failure was observed in the observation group. Conclusions:Both dual stability constructs and modified Scott techniques can relieve the clinical symptoms of spondylolysis in active adolescents to various extents. However, dual stability constructs with pedicle screws and laminar screws may lead to a higher isthmus healing rate and better curative effects.

Objective To screen the macroporous adsorption resin suitable for the separation and purification of total polyphenols from purple tea and establish the purification process parameters to prepare high-purity total polyphenols from purple tea. Methods The static adsorption-elution test was used to screen macroporous adsorption resin for the purification of total polyphenols from purple tea. Based on the single factor test, the comprehensive score of adsorption rate was used as the index to investigate the effects of different factors on the purification process and identify the optimal parameters for the purification process. Those factors included sample concentration, the pH value of the sample solution, the ratio of column diameter to height, sample size, ethanol percentage in the eluent, eluent volume and elution flow rate. Results The best process parameters for purification of total polyphenols from purple tea by AB-8 macroporous adsorption resin were as following. The sample concentration was 375 μg/ml with flow rate 2 ml/min. The sample volume was 3 BV. The sample solution pH was 2. The ratio of colume diameter to height was 1∶6. The impurities were removed first by water 3 BV. 50% ethanol 4 BV was used for elution with flow rate 2 ml/min. Conclusion AB-8 macroporous resin was selected for the purification of polyphenols from purple tea under the optimized technological conditions. The mass fraction of total polyphenols increased from 40.2% to an average of 69.8%. The solid content decreased from 56.0 mg to 29.9 mg. The established purification process has good stability and feasibility. It can be used as a purification process for total polyphenols from purple tea.

Objective To evaluate the release characteristics in vitro, pharmacokinetics in rabbits and in vivo-in vitro correlation of silymarin phospholipid complex microporous osmotic pump controlled release tablets（SM-PC MPOP）. Methods The release characteristics of SM-PC MPOP in vitro were detected by HPLC in the artificial gastric fluid. Six beagle dogs were subjected to double cycle cross control, which were given SM-PC MPOP and Legalon（30 mg/kg）. The concentration of silybin in plasma was determined by HPLC and the data were processed by software. Results The cumulative release rate of SM-PC MPOP in vitro was over 85% in 12 h. The pharmacokinetics in beagle dogs showed that SM-PC MPOP and legalon conformed to double compartment first-order absorption model and the pharmacokinetic parameters were obtained: t_max:（3.2±0.4）and（0.9±0.1）h, C_max:（0.298 6±0.068 9）and（0.629 9±0.076 5）μg/ml, AUC_0→24:（2.996 8±0.583 3）and（2.268 9±0.432 8）h·μg /ml. The relative bioavailability of SM-PC MPOP was（162.21 ± 30.82）%. Conclusion SM-PC MPOP could release slowly, which could increase the relative bioavailability significantly. The correlation between the absorption in vivo and release in vitro was fine（r = 0.839 0）.

Objective To prepare silymarin phospholipids complex（SM-PC） and investigate its physicochemical properties. Methods On the basis of single-factor tests, the drug-lipid ratio, drug concentration and reaction temperature were selected as the factors of the central composite design and response surface methodology in the preparation of SM-PC by solvent volatilization, and the best process was optimized with the compound rate as the index. And its in vitro dissolution was measured. Results The optimum preparation technology of SM-PC was as follows: acetone was used as compound solvent, the concentration of SM was 8.0 mg/ml, the mass ratio of SM to phospholipid was 1∶1.8, the reaction temperature was 56 ℃ and the recombination rate was（95.15±1.55）% with deviation of less than 3%. The in vitro dissolution test showed that the dissolution of SM-PC was close to 90% in 60 min. The dissolution behavior of main component of silybin was similar to that of silymarin capsules（Legalon ^®）, which was higher than SM-API. Conclusion SM-PC was successfully prepared by central composite design response surface method, which significantly improved the dissolution and laid a foundation for the study of subsequent preparations.