To improve the status of management in respiratory failure in China,the project of Study on Pathogenesis and Treatment of Respiratory Failure was designed and conducted by three medical centers(Beijing Institute of Respiratory Medicine-Beijing Chaoyang Hospital,Affiliated to Capital Medical University,Zhongshang Hospital-Fudan University,Guangzhou Institute of Respiratory Medicine-First Guangzhou Medical College)for more than ten years.This project was focused on pathogenesis and treatment strategies of respiratory failure and achieved the following important innovations:(1)Pulmonary Infection Control Window(PIC Window)was firstly proposed and used to determine the time switching point of sequential invasive-noninvasive ventilation;(2)The largest sample size of early use of noninvasive positive pressure ventilation(NPPV)for acute exacerbated COPD(AECOPD)on general ward provided the evidence-based data for expanding the indication of NPPV from treating respiratory failure to alleviating respiratory muscle fatigue;(3)Three new types of masks with intellectual property for NPPV were developed;(4)Designing of intrinsic expiratory end positive pressure(PEEPi)lung model with property of expiratory flow limitation confirmed that PEEPi was the most important factor that increased inspiratory difficulty;(5)The systematic measurement was established for diaphragm strength and endurance;(6)Aquaporin 1(AQP1)was firstly proved the key channel of fluid transportation in the lung;(7)A multicenter prospective cohort study provided objective data that depression had causal effect on COPD exacerbation and hospitalization;(8)Two guidelines for NPPV and mechanical ventilation of AECOPD were initiated by this group.This project has been widely used in clinical practice and promoted the research and treatment of respiratory failure in China.

Adult ; Clavicle ; injuries ; Female ; Fractures, Bone ; surgery ; Humans ; Male ; Scapula ; injuries ; Shoulder Joint ; surgery ; Young Adult

Objective:To discuss the effects of superelastic nickel-titanium archwires(SENT)and heat-activated nickel-titanium archwires(HANT)on the initial alignment efficiency of mandibular anterior teeth and pain levels of the patients with extraction orthodontic treatment and non-extraction orthodontic treatment by using low-friction self-ligating brackets,and to provide the basis for the selection of the most suitable archwire in orthodontic clinical practice.Methods:Eighty patients underwent fixed orthodontic treatment with self-ligating brackets were randomly assigned to SENT or HANT subgroups,and there were 40 patients in extraction orthodontic treatment group and 40 patients in non-extraction orthodontic treatment group.A single operator fully engaged a 0.014-inch straight archwire into the brackets.The patients,operators,and data measurers were all blinded;the initial clinical alignment efficiency of the archwires of the patients in various groups was observed,and the Little's index was calculated;the visual analog scale(VAS)scores and pain perception of the patients in various groups were recorded 4 h after initial bonding of the appliances and every day before breakfast during the first week of orthodontic treatment;multivariate regression analysis was performed for the initial Little's index,gender,and age,and the influence factors of pain in the patients was analyzed.Results:There were no significant differences in age,gender,and initial Little's index among the patients in extraction group and non-extraction group(P＞0.05).Compared with before treatment,the Little's indexes of the patients in both HANT and SENT subgroups in non-extraction orthedontic treatment group were decreased 4 weeks after treatment,but the difference between groups was not significant(P＞0.05).Compared with SENT subgroup in non-extraction orthodontic treatment group,the Little's index of the patients in HANT subgroup was decreased(P＜0.05).In extraction orthodontic treatment group,there were no significant differences in Little's indexes of the patients between the HANT and SENT subgroups before and after treatment(P＞0.05).The pain perception peaked on the first day after initial bonding and gradually decreased to baseline levels.The patients in SENT and HANT subgroups in both extraction and non-extraction orthodontic treatment groups showed the similar patterns of pain change.There were no significant differences in the average VAS scores and maximum pain intensity scores between the patients in SENT and HANT subgroups at different time points(P＞0.05).The type of archwire had no significant effect on the degree of pain,while time significantly affected the degree of pain.The multivariate regression analysis results showed a significant correlation between initial Little's index and maximum VAS scores of the patients in extraction orthodontic treatment group(b=0.359,P=0.033).Gender and age did not affect the degree of pain of the patients in either group.Conclusion:When applying low-friction self-ligating brackets for orthodontic treatment,the initial alignment efficiency with 0.014-inch HANT archwires is superior to 0.014-inch SENT archwires in non-extraction treatment group,while both archwires show the same efficiency in extraction patients.SENT and HANT archwires do not affect the initial degrees of pain of the orthodontic patients.

Objective This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite,aiming to provide a refer-ence for clinical treatment.Methods This study was reviewed and approved by the Ethics Committee,and informed consent was obtained from the patients.CBCT images of eighty-one untreated patients(40 anterior open bite patients and 41 normal overbite patients)with high-angle skeletal Class Ⅱ malocclusion were selected before treatment.Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root mor-phology,and the differences between the two groups were analyzed.Results There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group,signifi-cant differences were found in the root length of maxillary central incisor(11.12±1.37)mm、mandibular central inci-sor(10.15±1.09)mm,mandibular lateral incisor(11.27±1.15)mm and mandibular canine(12.81±1.48)mm be-tween the open bite group and the normal overbite group(P＜0.05).On the other hand,the two groups were significant-ly different in crown-root morphology of the maxillary central incisor(1.10°±3.62° vs.4.53°±2.30°,P＜0.01)but not in the mandibular central incisor.Conclusion The root length of the maxillary central incisor,mandibular central inci-sor,mandibular lateral incisor,mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients,and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root.The crown-root angle is smaller,which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱopen bite patients.

Objective This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite,aiming to provide a refer-ence for clinical treatment.Methods This study was reviewed and approved by the Ethics Committee,and informed consent was obtained from the patients.CBCT images of eighty-one untreated patients(40 anterior open bite patients and 41 normal overbite patients)with high-angle skeletal Class Ⅱ malocclusion were selected before treatment.Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root mor-phology,and the differences between the two groups were analyzed.Results There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group,signifi-cant differences were found in the root length of maxillary central incisor(11.12±1.37)mm、mandibular central inci-sor(10.15±1.09)mm,mandibular lateral incisor(11.27±1.15)mm and mandibular canine(12.81±1.48)mm be-tween the open bite group and the normal overbite group(P＜0.05).On the other hand,the two groups were significant-ly different in crown-root morphology of the maxillary central incisor(1.10°±3.62° vs.4.53°±2.30°,P＜0.01)but not in the mandibular central incisor.Conclusion The root length of the maxillary central incisor,mandibular central inci-sor,mandibular lateral incisor,mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients,and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root.The crown-root angle is smaller,which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱopen bite patients.

Objective This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite,aiming to provide a refer-ence for clinical treatment.Methods This study was reviewed and approved by the Ethics Committee,and informed consent was obtained from the patients.CBCT images of eighty-one untreated patients(40 anterior open bite patients and 41 normal overbite patients)with high-angle skeletal Class Ⅱ malocclusion were selected before treatment.Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root mor-phology,and the differences between the two groups were analyzed.Results There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group,signifi-cant differences were found in the root length of maxillary central incisor(11.12±1.37)mm、mandibular central inci-sor(10.15±1.09)mm,mandibular lateral incisor(11.27±1.15)mm and mandibular canine(12.81±1.48)mm be-tween the open bite group and the normal overbite group(P＜0.05).On the other hand,the two groups were significant-ly different in crown-root morphology of the maxillary central incisor(1.10°±3.62° vs.4.53°±2.30°,P＜0.01)but not in the mandibular central incisor.Conclusion The root length of the maxillary central incisor,mandibular central inci-sor,mandibular lateral incisor,mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients,and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root.The crown-root angle is smaller,which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱopen bite patients.

Objective This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite,aiming to provide a refer-ence for clinical treatment.Methods This study was reviewed and approved by the Ethics Committee,and informed consent was obtained from the patients.CBCT images of eighty-one untreated patients(40 anterior open bite patients and 41 normal overbite patients)with high-angle skeletal Class Ⅱ malocclusion were selected before treatment.Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root mor-phology,and the differences between the two groups were analyzed.Results There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group,signifi-cant differences were found in the root length of maxillary central incisor(11.12±1.37)mm、mandibular central inci-sor(10.15±1.09)mm,mandibular lateral incisor(11.27±1.15)mm and mandibular canine(12.81±1.48)mm be-tween the open bite group and the normal overbite group(P＜0.05).On the other hand,the two groups were significant-ly different in crown-root morphology of the maxillary central incisor(1.10°±3.62° vs.4.53°±2.30°,P＜0.01)but not in the mandibular central incisor.Conclusion The root length of the maxillary central incisor,mandibular central inci-sor,mandibular lateral incisor,mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients,and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root.The crown-root angle is smaller,which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱopen bite patients.

Objective This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite,aiming to provide a refer-ence for clinical treatment.Methods This study was reviewed and approved by the Ethics Committee,and informed consent was obtained from the patients.CBCT images of eighty-one untreated patients(40 anterior open bite patients and 41 normal overbite patients)with high-angle skeletal Class Ⅱ malocclusion were selected before treatment.Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root mor-phology,and the differences between the two groups were analyzed.Results There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group,signifi-cant differences were found in the root length of maxillary central incisor(11.12±1.37)mm、mandibular central inci-sor(10.15±1.09)mm,mandibular lateral incisor(11.27±1.15)mm and mandibular canine(12.81±1.48)mm be-tween the open bite group and the normal overbite group(P＜0.05).On the other hand,the two groups were significant-ly different in crown-root morphology of the maxillary central incisor(1.10°±3.62° vs.4.53°±2.30°,P＜0.01)but not in the mandibular central incisor.Conclusion The root length of the maxillary central incisor,mandibular central inci-sor,mandibular lateral incisor,mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients,and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root.The crown-root angle is smaller,which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱopen bite patients.

Objective This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite,aiming to provide a refer-ence for clinical treatment.Methods This study was reviewed and approved by the Ethics Committee,and informed consent was obtained from the patients.CBCT images of eighty-one untreated patients(40 anterior open bite patients and 41 normal overbite patients)with high-angle skeletal Class Ⅱ malocclusion were selected before treatment.Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root mor-phology,and the differences between the two groups were analyzed.Results There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group,signifi-cant differences were found in the root length of maxillary central incisor(11.12±1.37)mm、mandibular central inci-sor(10.15±1.09)mm,mandibular lateral incisor(11.27±1.15)mm and mandibular canine(12.81±1.48)mm be-tween the open bite group and the normal overbite group(P＜0.05).On the other hand,the two groups were significant-ly different in crown-root morphology of the maxillary central incisor(1.10°±3.62° vs.4.53°±2.30°,P＜0.01)but not in the mandibular central incisor.Conclusion The root length of the maxillary central incisor,mandibular central inci-sor,mandibular lateral incisor,mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients,and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root.The crown-root angle is smaller,which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱopen bite patients.

Objective This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite,aiming to provide a refer-ence for clinical treatment.Methods This study was reviewed and approved by the Ethics Committee,and informed consent was obtained from the patients.CBCT images of eighty-one untreated patients(40 anterior open bite patients and 41 normal overbite patients)with high-angle skeletal Class Ⅱ malocclusion were selected before treatment.Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root mor-phology,and the differences between the two groups were analyzed.Results There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group,signifi-cant differences were found in the root length of maxillary central incisor(11.12±1.37)mm、mandibular central inci-sor(10.15±1.09)mm,mandibular lateral incisor(11.27±1.15)mm and mandibular canine(12.81±1.48)mm be-tween the open bite group and the normal overbite group(P＜0.05).On the other hand,the two groups were significant-ly different in crown-root morphology of the maxillary central incisor(1.10°±3.62° vs.4.53°±2.30°,P＜0.01)but not in the mandibular central incisor.Conclusion The root length of the maxillary central incisor,mandibular central inci-sor,mandibular lateral incisor,mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients,and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root.The crown-root angle is smaller,which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱopen bite patients.