BACKGROUND: Death burden of stroke is severe with over one-third rural residents in China, but there is still a lack of specific national and high-quality reports on the urban-rural differences in stroke burden, especially for subtypes. We aimed to update the understanding of urban-rural differences in stroke deaths. METHODS: This is a descriptive observational study. Data from the national mortality surveillance system, which covers 323.8 million with 605 disease surveillance points (DSPs) across all 31 provinces, municipalities, and autonomous regions in China. All deaths from stroke as the underlying cause from 2015 to 2020 according to DSPs. Crude mortality rate and age-standardized mortality rate (ASMR) were estimated through DSPs. Average annual percentage change was used to explain the change in mortality rate. RESULTS: From 2015 to 2020, the majority of deaths from all stroke subtypes occurred in rural areas. There were significant differences between the changes of urban and rural ASMRs. On the whole, the changes in urban areas were evidently better, and the ASMR differences were basically expanding. Stroke ASMR in urban China decreased by 15.5%. The rural ASMR of ischemic stroke increased by 12.9%. The rural and urban ASMRs of intracerebral hemorrhage decreased by 24.9% and 27.4%, and those of subarachnoid hemorrhage decreased by 29.5% and 40.4%, respectively. The highest ASMRs of all stroke subtypes and the increasing trend of ischemic stroke ASMR make rural males the focus of stroke management. CONCLUSIONS The death burden of stroke varies greatly between urban and rural China. Rural residents face unique challenges.
Humans ; China/epidemiology* ; Stroke/mortality* ; Rural Population/statistics & numerical data* ; Male ; Female ; Urban Population/statistics & numerical data* ; Middle Aged ; Aged ; Aged, 80 and over ; Adult

The lumbar intervertebral disc exhibits a complex physiological structure with interactions between various segments, and its components are extremely complex. The material properties of different components in the lumbar intervertebral disc, especially the water content (undergoing dynamic change as influenced by age, degeneration, mechanical loading, and proteoglycan content) - critically determine its mechanical properties. When the lumbar intervertebral disc is under continuous pressure, water seeps out, and after the pressure is removed, water re-infiltrates. This dynamic fluid exchange process directly affects the mechanical properties of the lumbar intervertebral disc, while previous isotropic modeling methods have been unable to accurately reflect such solid-liquid phase behaviors. To explore the load-bearing mechanism of the lumbar intervertebral disc and establish a more realistic mechanical model of the lumbar intervertebral disc, this study developed a solid-liquid biphasic, fiber-reinforced finite element model. This model was used to simulate the four movements of the human lumbar spine in daily life, namely flexion, extension, axial rotation, and lateral bending. The fluid pressure, effective solid stress, and liquid pressure-bearing ratio of the annulus fibrosus and nucleus pulposus of different lumbar intervertebral discs were compared and analyzed under the movements. Under all the movements, the fluid pressure distribution was closer to the nucleus pulposus, while the effective solid stress distribution was more concentrated in the outer annulus fibrosus. In terms of fluid pressure, the maximum fluid pressure of the lumbar intervertebral disc during lateral bending was 1.95 MPa, significantly higher than the maximum fluid pressure under other movements. Meanwhile, the maximum effective solid stress of the lumbar intervertebral disc during flexion was 2.43 MPa, markedly higher than the maximum effective solid stress under other movements. Overall, the liquid pressure-bearing ratio under axial rotation was smaller than that under other movements. Based on the solid-liquid biphasic modeling method, this study more accurately revealed the dominant role of the liquid phase in the daily load-bearing process of the lumbar intervertebral disc and the solid-phase mechanical mechanism of the annulus fibrosus load-bearing, and more effectively predicted the solid-liquid phase co-load-bearing mechanism of the lumbar intervertebral disc in daily life.
Humans ; Finite Element Analysis ; Intervertebral Disc/physiology* ; Lumbar Vertebrae/physiology* ; Weight-Bearing/physiology* ; Biomechanical Phenomena ; Stress, Mechanical ; Computer Simulation ; Models, Biological

Image 1.

In the field of dental aesthetics,digital aesthetic design plays a crucial role in helping dentists to predict treatment outcomes vis-ually,as well as in enhancing the consistency of knowledge and understanding of aesthetic goals between dentists and patients.It serves as the foundation for achieving ideal aesthetic effects.However,there is no clear standard for this digital process currently in China and abroad.Many dentists lack of systematic understanding of how to carry out digital aesthetic design for treatment.To establish standardized processes for dental aesthetic design and to improve the homogeneity of treatment outcomes,Chinese Society of Digital Dental Industry(CSD-DI)convened domestic experts in related field to compile this consensus.This article elaborates on the key aspects of digital aesthetic data collection,integration steps,and the digital aesthetic design process.It also formulates a decision tree for dental aesthetics at macro level and outlines corresponding workflows for various clinical scenarios,serving as a reference for clinicians.

Objective Based on the PDCA cycle theory,it explores the application mode of scenario simulation teaching method in clinical basic skills training.Methods The 96 students majoring in clinical medicine from the First Af-filiated Hospital of Harbin Medical University in 2019 were selected as the research objects,and the experimental group and the control group were set up respectively,with 48 students in each group,and skills training was car-ried out from March to December 2022.The control group was trained in the traditional way,and the experimental group was trained in the scenario simulation teaching method based on the PDCA cycle.The training effect and training satisfaction of the control group and the experimental group were compared and analyzed.Results In the sur-vey of the training effect of the students in the experimental group,the evaluation results of the basic clinical skills operation were higher than those in the control group,and the difference between the two groups was statistically significant(P＜0.01).In terms of the appropriate and safe operation mode,There was no significant difference be-tween the two groups(P＞0.05).In the training satisfaction survey,students in the experimental group were signifi-cantly more satisfied with the training than those students who are in the control group.The difference was statistical-ly significant(P＜0.01).Conclusion The application of scenario simulation teaching method based on PDCA cycle in clinical basic skills training helps to improve the quality of clinical basic skills training and student satisfaction.

Objective Based on the PDCA cycle theory,it explores the application mode of scenario simulation teaching method in clinical basic skills training.Methods The 96 students majoring in clinical medicine from the First Af-filiated Hospital of Harbin Medical University in 2019 were selected as the research objects,and the experimental group and the control group were set up respectively,with 48 students in each group,and skills training was car-ried out from March to December 2022.The control group was trained in the traditional way,and the experimental group was trained in the scenario simulation teaching method based on the PDCA cycle.The training effect and training satisfaction of the control group and the experimental group were compared and analyzed.Results In the sur-vey of the training effect of the students in the experimental group,the evaluation results of the basic clinical skills operation were higher than those in the control group,and the difference between the two groups was statistically significant(P＜0.01).In terms of the appropriate and safe operation mode,There was no significant difference be-tween the two groups(P＞0.05).In the training satisfaction survey,students in the experimental group were signifi-cantly more satisfied with the training than those students who are in the control group.The difference was statistical-ly significant(P＜0.01).Conclusion The application of scenario simulation teaching method based on PDCA cycle in clinical basic skills training helps to improve the quality of clinical basic skills training and student satisfaction.

Objective Based on the PDCA cycle theory,it explores the application mode of scenario simulation teaching method in clinical basic skills training.Methods The 96 students majoring in clinical medicine from the First Af-filiated Hospital of Harbin Medical University in 2019 were selected as the research objects,and the experimental group and the control group were set up respectively,with 48 students in each group,and skills training was car-ried out from March to December 2022.The control group was trained in the traditional way,and the experimental group was trained in the scenario simulation teaching method based on the PDCA cycle.The training effect and training satisfaction of the control group and the experimental group were compared and analyzed.Results In the sur-vey of the training effect of the students in the experimental group,the evaluation results of the basic clinical skills operation were higher than those in the control group,and the difference between the two groups was statistically significant(P＜0.01).In terms of the appropriate and safe operation mode,There was no significant difference be-tween the two groups(P＞0.05).In the training satisfaction survey,students in the experimental group were signifi-cantly more satisfied with the training than those students who are in the control group.The difference was statistical-ly significant(P＜0.01).Conclusion The application of scenario simulation teaching method based on PDCA cycle in clinical basic skills training helps to improve the quality of clinical basic skills training and student satisfaction.

Objective Based on the PDCA cycle theory,it explores the application mode of scenario simulation teaching method in clinical basic skills training.Methods The 96 students majoring in clinical medicine from the First Af-filiated Hospital of Harbin Medical University in 2019 were selected as the research objects,and the experimental group and the control group were set up respectively,with 48 students in each group,and skills training was car-ried out from March to December 2022.The control group was trained in the traditional way,and the experimental group was trained in the scenario simulation teaching method based on the PDCA cycle.The training effect and training satisfaction of the control group and the experimental group were compared and analyzed.Results In the sur-vey of the training effect of the students in the experimental group,the evaluation results of the basic clinical skills operation were higher than those in the control group,and the difference between the two groups was statistically significant(P＜0.01).In terms of the appropriate and safe operation mode,There was no significant difference be-tween the two groups(P＞0.05).In the training satisfaction survey,students in the experimental group were signifi-cantly more satisfied with the training than those students who are in the control group.The difference was statistical-ly significant(P＜0.01).Conclusion The application of scenario simulation teaching method based on PDCA cycle in clinical basic skills training helps to improve the quality of clinical basic skills training and student satisfaction.

Objective To observe the effects of a 1 470 nm semiconductor laser on vaporization cutting,coagulation,and thermal injury of ex vivo animal tissues,aiming to explore the feasibility of its application in the treatment of benign prostatic hyperplasia.Methods The experimental group and control group were treated with HANS-D1 and ML-DD01FI 1 470 nm semiconductor laser therapy equipment,respectively.Fresh ex vivo pig bladder tissue was exposed to lasers with the optical fiber placed at distances of 0.5 cm and 1 cm from the tissue for 5 s.The effects of layers at powers of 60,90,120,150,and 160 W on tissue injury were observed.Ex vivo dog prostate and pig kidney tissues were used for vaporization ablation and cutting to observe the effects of lasers at the same power levels on tissue vaporization and cutting thermal injury.Additionally,in coagulation mode,the effects of 30,40,and 50 W semiconductor lasers on tissue coagulation were observed after irradiating ex vivo pig kidney tissue for 5,10,and 15 seconds.Results When the optical fiber was placed 1 cm away from the tissue,the 1 470 nm semiconductor lasers did not cause accidental damage to adjacent normal bladder tissue.However,at a distance of 0.5 cm,the 120 W,150 W,or 160 W lasers caused slight damage to the bladder tissue.In addition,with the increase in output power,the vaporization ablation efficiency of 60-160 W lasers on dog prostate tissue gradually increased,showing a good linear correlation between vaporization volume and total energy consumption(P＜0.001).Histopathological HE staining results indicated that the coagulation layer thickness in the experimental group was 292.20-309.98 μm,and the vaporization layer depth was 1.49-4.52 mm.In the control group,the coagulation layer thickness was 289.91-303.53 μm,and the vaporization layer depth was 1.88-4.43 mm.There was no significant difference between the two groups(P＞0.05).Moreover,when performing vaporization cutting on ex vivo pig kidney tissue with a cross-sectional area of 1 cm2,the efficiency of vaporization cutting by the 60-160 W 1 470 nm semiconductor lasers increased with the increase in output power(P＜0.05).The coagulated layer thickness in the experimental group was 496.04-514.47 μm,while that in the control group was 489.39-518.53 μm.Additionally,in coagulation mode,when ex vivo pig kidney tissue was irradiated for 5,10,and 15 s with 30,40,and 50 W semiconductor lasers,the coagulation diameter,groove depth,and coagulation efficiency gradually increased with the increase in laser output power(P＜0.05).The coagulation layer thickness in the experimental group and control group was 399.10-449.98 μm and 392.97-447.65 μm,respectively,and the vaporization layer depth was 3.05-7.09 mm and 2.70-7.14 mm,respectively.There was no significant difference between the two groups(P＞0.05).Conclusion The 1 470 nm semiconductor laser shows good vaporization ablation,cutting,and coagulation effect on ex vivo tissues,with a good linear correlation between the effect and the output energy.

Objective To analyze the efficacy of different intracavitary operations for calyceal diverticulum calculi,so as to provide reference for the diagnosis and treatment of such disease.Methods A retrospective analysis of the data of 21 patients with calyceal diverticulum calculi was conducted during Jan.2015 and Dec.2021.The patients were divided into the retrograde intrarenal surgery(RIRS,n=14)group and percutaneous nephrolithotomy(PCNL,n=7)group.The perioperative data were compared.Results There was no significant difference in stone load between the RIRS group and PCNL group[(11.56±4.79)mm vs.(13.06±6.27)mm,P=0.609].There were significant differences in the thickness of renal parenchyma at the top of the diverticulum[(10.08±4.81)mm vs.(5.24±2.23)mm,P=0.005],operation time[(58.57±19.23)min vs.(88.29±25.28)min,P=0.007],hospitalization time[3(1,5)vs.12(5,7),P=0.023]days.After operation,there were no significant differences in stone-clearance rate,decrease of hemoglobin,and postoperative complications between the two groups(P＞0.05).Conclusion Both RIRS and PCNL are viable options for treating renal calyceal diverticulum calculi.RIRS has advantages of shorter operation time and hospital stay.PCNL can be an alternative treatment when RIRS is unsuccessful.