Medical science and technology are important as they concerns people's life. Innovation of medical science and technology is therefore significant for the development of the science and technology. This article discussed the current situation of medical science and technology in China,and analyszed its opportnities and challenges. In addition, strategies for its development during the Twelfth Five-year Plan period are proposed, namely, to develop HLS, construct the innovative systems of medical science and technology, and to promote the coordinated development of the medicine and science and technology.

Objective To evaluate the applicant effect of improved flushing suction method for SpyClass choledochoscope operation. Methods Seventy-three patients who underwent SpyGlass choledocho-scopy from February 2013 to January 2015 were enrolled. Negative pressure biopsy channel was used in group A(n= 34)during conducting SpyGlass choledochoscopy with the tube directly connected to the conveying pipe and combined with duodenoscope suction.In group B(n= 39),the biopsy channel of disposable syringe jacket was first connected to a delivery catheter,then the negative pressure pipe was put in the injector coat, combined with duodenoscope suction. Adverse reactions,theⅠ image acquisition time after the placement of SpyGlass delivery catheter to pancreaticobiliary duct,the total operation time,and the occurrence of compli-cations after operation were recorded. Results Sinus bradycardia,arrhythmia,agitation occurred in 7 cases (20. 6%),5 cases( 14. 7%),and 10 cases( 29. 4%) respectively in group A,those were 1 case (2. 6%),0 case(0/ 39),2 cases(5. 1%)respectively in group B with significant difference(P<0. 05). The time to acquire a clear image and the total operation time in group A were 6. 2 min and 24. 9 min,and 3. 3 min and 16. 8 minutes in B group with significant difference(P<0. 05),postoperative cholangitis oc-curred in 5 cases in group A(14. 7%),1 case(2. 6%)in group B with significant difference(P<0. 05). Conclusion New irrigation and suction method has obvious advantages in the SpyGlass system.

Objective: To analyze epidemiological characteristics of brucellosis in Shaoxing City, Zhejiang Province from 2005 to 2023, so as to provide the basis for developing targeted control measures. Methods: Data of brucellosis cases and epidemiological investigation in Shaoxing City from 2005 to 2023 were collected from the Monitoring and Reporting Management System of the Chinese Disease Prevention and Control Information System. The epidemiological characteristics of brucellosis were descriptively analyzed, the trend in incidence of brucellosis was analyzed using average annual percent change (AAPC). Results: A total of 270 cases of brucellosis were reported in Shaoxing City from 2005 to 2023, with an average annual incidence of 0.29/105. The AAPC was 0.812%, with no significant changing trend (P>0.05). The incidence of brucellosis peaked from February to March, with 80 cases (29.63%). The reported cases were mainly distributed in Shangyu District (139 cases, 51.48%) and Shengzhou City (74 cases, 27.41%). There were 188 male cases and 82 female cases, with a male-to-female ratio of 2.29∶1. The cases were primarily concentrated in the age group of 40 to <70 years, with 205 cases accounting for 75.93%. Among these, 86 cases were reported in the 50 to <60 years of age group, accounting for 41.95%. The majority of the cases were farmers, with 187 cases accounting for 69.26%. The median interval from onset to diagnosis was 22.73 (interquartile range, 39.97) days, with a delayed diagnosis rate of 62.96%. Infections through breeding, selling and transporting cattle and sheep resulted in 164 cases (60.74%), and through buying and slaughtering resulted in 36 cases (13.33%). An outbreak of brucellosis was reported in Xinchang County in 2018, with three confirmed cases. Conclusions The incidence of brucellosis in Shaoxing City had no significant change from 2005 to 2023. The peak period was from February to March. The cases were mainly distributed in Shangyu District and Shengzhou City. People aged 50 to <60 years, males, and farmers were the key groups for prevention and control.

Objective: To investigate the epidemiological characteristics of hemorrhagic fever with renal syndrome (HFRS) in Shaoxing City from 2006 to 2022, so as provide insights into improvements of the HFRS control strategy. Methods: Data pertaining to HFRS cases in Shaoxing City from 2006 to 2022 were captured from the Surveillance System of China Information System for Disease Control and Prevention. The temporal, population and regional distributions of HFRS were analyzed using the descriptive epidemiological method, and the trends in incidence of HFRS were evaluated using annual percent change (APC). Results: Totally 1 022 HFRS cases were reported in Shaoxing City from 2006 to 2022, with annual average incidence of 1.22/105 and three deaths. The incidence of HFRS appeared a tendency towards a decline in Shaoxing City from 2006 to 2022 (APC=-11.101%, t=-9.930, P<0.001), and the incidence of HFRS peaked from May to June and from November to January of the next year. A higher incidence of HFRS was seen in men than in women (1.76/105 vs. 0.68/105; χ2=201.361, P<0.001). There were 714 HFRS cases at ages of 30 to 59 years (69.86%), and farmers were the predominant occupation (78.18%). The three counties with the largest number of HFRS cases included Zhuji (366 cases), Xinchang (263 cases) and Shengzhou (134 cases). The incidence of HFRS was lower in urban districts (Yuecheng, Keqiao and Shangyu) than in counties (Zhuji, Shengzhou and Xinchang) (0.58/105 vs. 1.96/105; χ2=326.880, P<0.001). Conclusion The incidence of HFRS appeared a tendency towards a decline in Shaoxing City from 2006 to 2022, and the incidence was high in late spring, early summer and winter. The HFRS cases were mainly males, young and middle-aged people, and farmers, and predominantly distributed in counties. Targeted control measures are needed.

OBJECTIVE To investigate the incidence of nosocomial infection in ICU patients and its risk factors to take measures to prevent from infection. METHODS The nosocomial infection of ICU patients in 12 hospitals from Oct to Dec 2007 using the method of target monitoring was investigated. The nosocomial infection rate was regalated by the method of ASA. The invasive procedure and the associated infection rate were analyzed. RESULTS Among 2087 inpatients in ICU,236 suffered from nosocomial infection,The nosocomial infection incidence was 11.31%,and the nosocomial infection rate per day was 2.38% after regulated by the method of ASA. The patient incidence of nosocomial infection was 3.57%,and the nosocomial infection rate per day was 0.67%. CONCLUSIONS The patients in ICU are susceptible population of nosocomial infection,target monitoring in ICU is an effective surveillance method to reduce the prevalence of nosocomial infection.

Objective To evaluate accuracy,safety and clinical practicality of three measurements for the length of biliary stent.Methods A total of 120 patients with indwelling biliary stents were randomly divided into group A,B and C by the admission time,who then received endoscopic guide wire measurement (Group A),cutting knife measurement (Group B) and formula measurement (Group C) for biliary stent length.Results There were no statistical significance in sex,age,type of primary disease and biliary stent materials (P＞0.05).Operation time in group C (9.4 ± 2.47 min) was shorter than that in group A (15.8±1.71 min) and B (16.2 ± 2.22 min) with significant difference (P＜0.05).There was no significant difference in the incidence of postoperative cholangitis [7.5％ (3/40) VS 5.0％ (2/40) VS 5.0％ (2/40)]or the measurement accuracy of biliary stent length [100.0％ (40/40) VS 95.0％ (38/40) VS 97.5％(39/40)] (P＞0.05).Conclusion Three stent length measurements are accurate and safe,but formula measurement has more advantage in clinical practicality.

Objective: To understand the epidemiological characteristics of viral hepatitis B in Shaoxing from 2008 to 2018,so as to provide basis for formulating the viral hepatitis B prevention and control strategy. Methods: The data of viral hepatitis B cases in Shaoxing from 2008 to 2018 were collected from infectious diseases reporting and management system. Descriptive epidemiological method was employed to analyze the time,place and population characteristics of viral hepatitis B cases in Shaoxing. Annual percentage change（APC）was calculated to analyze the development trend of viral hepatitis B. Results : From 2008 to 2018,a total of 22 764 cases of viral hepatitis B were reported in Shaoxing,with an average annual incidence rate of 42.24/100 000 and a standardized incidence rate of 39.19/100 000. The incidence rate of viral hepatitis B decreased from 2008 to 2018,among which the APC from 2012 to 2018 was -18.00% with a significantly downward trend（P<0.05）. Six counties,cities or districts in Shaoxing reported cases of viral hepatitis B,of which Zhuji（49.40/100 000）,Yuecheng（44.17/100 000）and Xinchang（43.28/100 000）ranked top three in average annual incidence rate. The incidence rate of viral hepatitis B in men was 57.07/100 000,which was higher than 27.33/100 000 in women（P<0.05）.The age of onset was mainly 25-59 years old,with 16 941 cases（74.42%）reported. The top three occupations were farmers,workers and migrant workers,with 15 013（65.95%）,2 730（11.99%）and 1 121（4.92%）cases reported,respectively. Conclusions The incidence of viral hepatitis B in Shaoxing from 2008 to 2018 showed a downward trend. Farmers,workers and migrant workers aged 25-59 years were at high risk of hepatitis B infection.

Objective To study the effects of using 25 kDa linear and branched PEI to transfer plasmid DNA pEGFP -C1 (pDNA ,encoding the enhanced green fluorescent protein reporter gene ) to the basilar membrane of the C57BL/6 mice cochlea in vitro .Methods L -PEI/pDNA and B -PEI/pDNA polyplexes were generated in 0 .1M phosphate buffer solution (PBS) or 5% glucose solution .Polyplexes were characterized by transmission electron mi-croscopy .Agarose gel retardation assay was used to determine the plasmid binding ability of L -PEI and B -PEI . The toxicity was investigated by MTT assay .The transfection was firstly evaluated in 293T cell line ,and then the appropriate amount of PEI and plasmid were applied for cochlear explant transfection of P4 mice pups .Results Un-der the same condition ,B -PEI had better transfection efficiency than L -PEI ,but its toxicity was also higher . When generated in PBS ,the polyplexes had lower toxicity than in glucose solution .L -PEI-pDNA nanoparticles could transfect the spiral limbus fibrocytes ,some spiral ganglion neurons and supporting cells ,but the efficiency was low .Conclusion L -PEI could be used as the non -viral vector for the transfection of the cultured basilar mem-brane of P4 mice pups ,but it should be modified to reach higher efficiency .

BACKGROUND:Autologous tissue-engineered bone marrow mesenchymal stem cel s (BMSCs) transplantation is one of the most common methods of treating early osteonecrosis of femoral head, but now there is stil no any special-purpose grafter available in the market. Such surgical transplantation is a laborious, time-consuming and tedious process, which goes against its clinical promotion. OBJECTIVE:To develop a supporting, efficient, special-purpose grafter, to solve the difficulty in stem cel s transplantation during core decompression of femoral head. METHODS:CAD software was used to perform solid modeling for this special-purpose grafter and print them by three-dimensional (3D) fast printing technology. The performance of this special-purpose grafter was tested by femoral head core decompression combined with BMSCs transplantation. It was compared with traditional surgical instrument in terms of duration of operation, intraoperative blood loss, visual analogue scale (VAS) of stem cel/biological fiber col agen complex omission amount and doctor’s satisfaction score. RESULTS AND CONCLUSION:(1) A kind of special-purpose grafter was developed by 3D printing technology rapidly. (2) Compared with the control group, duration of operation, intraoperative blood loss, VAS scores and doctor’s satisfaction scores were significantly improved in the trial group (P<0.05). (3) CAD software combined with 3D printing technology is a highly efficient means for front-line clinicians to perform independent development. The research and development of this special-purpose grafter provides a perfect solution to the laborious, time-consuming and tedious process of cel/biological col agen fiber transplantation.

BACKGROUND: 3D printing technology provides possibility for the preparation of an ideal bone tissue engineering scaffold with high individualization, precise regulation of the porosity, pore size and inter-aperture connectivity. OBJECTIVE: To study the physical properties and biocompatibility of allogeneic bone microparticle/poly (lactic-co-glycolic acid) composite absorbable scaffolds fabricated via fused deposition modeling 3D printing. METHODS: 3D printed bone microparticle/poly (lactic-co-glycolic acid) composite absorbable scaffolds were fabricated via fused deposition modeling. The porosity, water absorption, water contact angle and in vitro degradation rate of the scaffold were measured. (1) Cytotoxicity test: Rabbit adipose-derived mesenchymal stem cells were cultured in normal medium (negative control group) and composite scaffold extract (experimental group) for 1, 3, 5, 7 days, and cell counting kit-8 was then used to detect cell proliferation. (2) Hemolysis test: Rabbit anti-clotting was added to physiological saline, distilled water and composite scaffold extract, and the hemolysis rate was detected after 50 minutes. (3) Acute toxicity test: The physiological saline and composite scaffold extracts were intraperitoneally injected into the rabbits respectively to observe the general condition of rabbits and the pathological changes of important organs. RESULTS AND CONCLUSION: (1) The porosity, water absorption and water contact angle of the composite scaffold were (60.86±2.88) ％, (53.98±2.04) ％ and (76.27±0.34) °, respectively. (2) After in vitro immersion in PBS for 4 weeks, the absorbable composite scaffold degraded relatively slowly, and the scaffold morphology remained stable, while the degradation rate accelerated after 4 weeks. The scaffold was almost completely absorbed at about 11 weeks, and it is a relatively ideal absorbable scaffold material. (3) There was no difference in cell proliferation between the experimental group and the negative control group at different time points (P> 0.05) . The cytotoxicity of the absorbable composite scaffold was grade 1. (4) The hemolysis rate of the absorbable composite scaffold was 3.8％, which met the hemolytic requirement of biomedical materials (the hemolysis rate of less than 5％) . (5) Within 72 hours after injection of absorbable scaffold extract, the rabbits showed no acute toxic reaction, as well as no pathological changes in the liver, heart and kidney were observed after 7 days of injection. (6) To conclude, the 3D printed allogeneic bone microparticle/poly (lactic-co-glycolic acid) fabricated via fused deposition modeling 3D printing has preferable physical properties and biocompatibility.