OBJECTIVE: Lumbar discectomy is an effective treatment for lumbar disc herniation (LDH); however, up to 2–18% of patients with LDH have experienced recurrent disc herniation. The purpose of this study was to evaluate the efficacy of a novel annular closure device (ACD) for preventing LDH recurrence and re-operation compared with that of conventional lumbar discectomy (CLD).METHODS: In this prospective randomized controlled trial, we compared CLD with discectomy utilizing the Barricaid® (Intrinsic Therapeutics, Inc., Woburn, MA, USA) ACD. Primary radiologic outcomes included disc height, percentage of preoperative disc height maintained, and re-herniation rates. Additional clinical outcomes included visual analog scale (VAS) scores for back and leg pain, Oswestry Disability Index (ODI) scores, and 12-item short-form health survey (SF-12) quality of life scores. Outcomes were measured at preoperation and at 1 week, 1, 3, 6, 12, and 24 months postoperation.RESULTS: Sixty patients (30 CLD, 30 ACD) were enrolled in this study. At 24-month follow-up, the disc height in the ACD group was significantly greater than that in the CLD group (11.4±1.5 vs. 10.2±1.2 mm, p=0.006). Re-herniation occurred in one patient in the ACD group versus six patients in the CLD group (χ²=4.04, p=0.044). Back and leg VAS scores, ODI scores, and SF-12 scores improved significantly in both groups compared with preoperative scores in the first 7 days following surgery and remained at significantly improved levels at a 24-month follow-up. However, no statistical difference was found between the two groups.CONCLUSION: Lumbar discectomy with the Barricaid® (Intrinsic Therapeutics, Inc.) ACD is more effective at maintaining disc height and preventing re-herniation compared with conventional discectomy. Our results suggest that adoption of ACD in lumbar discectomy can help improve the treatment outcome.
Diskectomy ; Follow-Up Studies ; Health Surveys ; Humans ; Intervertebral Disc Displacement ; Leg ; Prospective Studies ; Quality of Life ; Recurrence ; Treatment Outcome ; Visual Analog Scale

OBJECTIVE: To determine whether the outcomes of percutaneous epidural neuroplasty (PEN) are influenced by the type of lumbar disc herniation (LDH) and evaluate the effectiveness of PEN in patients with single-level LDH.METHODS: This study included 430 consecutive patients with single-level LDH who underwent PEN. Before treatment, the LDH type was categorized as bulging, protrusion, extrusion, and sequestration, while Pfirrmann grades were assigned according to imaging findings. Visual analog scale (VAS) scores for back and leg pain and success rates (Odom’s criteria) were assessed at 1, 3, 6, and 12 months after treatment.RESULTS: The mean preoperative VAS scores for back and leg pain were 6.90 and 4.23, respectively; these decreased after PEN as follows : 2.25 and 1.45, respectively, at 1 month; 2.61 and 1.68, respectively, at 3 months; 2.28 and 1.48, respectively, at 6 months; and 2.88 and 1.48, respectively, at 12 months (p<0.001). The decrease in VAS scores for leg pain was significantly greater in the extrusion and sequestration groups than in the other two groups (p<0.05); there were no other significant differences among groups. More than 70% patients exhibited good or excellent 12-month outcomes according to Odom’s criteria. Subsequent surgery was required for 59 patients (13.7%), with a significantly higher rate in the extrusion (25.0%) and sequestration (30.0%) groups than in the bulging (7.3%) and protrusion (13.8%) groups (p<0.05). Nevertheless, subsequent surgery was not required for >70% patients with extrusion or sequestration. Patients with Pfirrmann grades 1–3 (14.0–21.5%) showed a significantly higher rate of subsequent surgery than those with Pfirrmann grade 0 (4.9%; p<0.05).CONCLUSION: Our findings suggest that PEN is an effective treatment for back and leg pain caused by single-level LDH, with the outcomes remaining unaffected by the LDH type.
Follow-Up Studies ; Humans ; Intervertebral Disc Displacement ; Leg ; Low Back Pain ; Treatment Outcome ; Visual Analog Scale

STUDY DESIGN: In-vitro biomechanical investigation. PURPOSE: To evaluate the biomechanical effects of the degeneration of the biodegradable cervical plates developed for anterior cervical discectomy and fusion (ACDF) on fusion and adjacent levels. OVERVIEW OF LITERATURE: Biodegradable implants have been recently introduced for cervical spine surgery. However, their effectiveness and safety remains unclear. METHODS: A linear three-dimensional finite element (FE) model of the lower cervical spine, comprising the C4–C6 vertebrae was developed using computed tomography images of a 46-year-old woman. The model was validated by comparison with previous reports. Four models of ACDF were analyzed and compared: (1) a titanium plate and bone block (Tita), (2) strong biodegradable plate and bone block (PLA-4G) that represents the early state of the biodegradable plate with full strength, (3) weak biodegradable plate and bone block (PLA-1G) that represents the late state of the biodegradable plate with decreased strength, and (4) stand-alone bone block (Bloc). FE analysis was performed to investigate the relative motion and intervertebral disc stress at the surgical (C5–C6 segment) and adjacent (C4–C5 segment) levels. RESULTS: The Tita and PLA-4G models were superior to the other models in terms of higher segment stiffness, smaller relative motion, and lower bone stress at the surgical level. However, the maximal von Mises stress at the intervertebral disc at the adjacent level was significantly higher in the Tita and PLA-4G models than in the other models. The relative motion at the adjacent level was significantly lower in the PLA-1G and Bloc models than in the other models. CONCLUSIONS: The use of biodegradable plates will enhance spinal fusion in the initial stronger period and prevent adjacent segment degeneration in the later, weaker period.
Absorbable Implants ; Diskectomy ; Female ; Finite Element Analysis ; Humans ; Intervertebral Disc ; Intervertebral Disc Degeneration ; Middle Aged ; Spinal Fusion ; Spine ; Titanium

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

Objective: Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion. Methods: A 3-dimensional FE model of intervertebral disc degeneration at L4–5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed. Results: We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3–5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3–5 compared to those in grades 0–2. Conclusion Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

We report a case of a solitary osteochondroma as a dumbbell tumor compressing the spinal cord and its surgical strategy. The patient is a 16-year-old female with longstanding posterior neck pain and left arm abduction weakness. She was examined by plain X-ray, three-dimensional-computed tomography, magnetic resonance imaging, and vertebral angiography. The analyses indicated a calcified extradural mass compressing the cord in the C3–4 portion extending into the neural and vertebral foramen with eroded vertebral body. The tumor was successfully excised using a modified combined anterior and posterior approach. Histopathologic study of the resected material confirmed the diagnosis. The postoperative assessment was followed by clinical and radiologically therapy for 5 years after surgery. Osteochondroma arises from enchondral bone but it rarely involves the spine, especially not as s dumbbell type. In this patient, the tumor may have arisen from the neural arch and extended into the extradural and extraforaminal space over a long period. We successfully removed the dumbbell tumor with a combined anterior oblique and posterior approach. However, further observation is essential because of the possibility of recurrence and sarcomatous change.
Adolescent ; Angiography ; Arm ; Cervical Cord* ; Cytochrome P-450 CYP1A1 ; Diagnosis ; Female ; Humans ; Magnetic Resonance Imaging ; Neck Pain ; Osteochondroma* ; Recurrence ; Spinal Cord ; Spinal Cord Compression ; Spine

Purpose: With an increasing number of anterior cervical discectomy and fusion (ACDF) being conducted for degenerative cervical disc disease, there is a rising interest in the related quality of management and healthcare costs. Unplanned readmission after ACDF affects both the quality of management and medical expenses. This meta-analysis was performed to evaluate the risk factors of unplanned readmission after ACDF to improve the quality of management and prevent increase in healthcare costs. Materials and Methods: We searched the databases of PubMed, EMBASE, Web of Science, and Cochrane Library to identify eligible studies using the searching terms, “readmission” and “ACDF.” A total of 10 studies were included. Results: Among the demographic risk factors, older age [weighted mean difference (WMD), 3.93; 95% confidence interval (CI), 2.30–5.56; p<0.001], male [odds ratio (OR), 1.23; 95% CI, 1.10–1.36; p<0.001], and private insurance (OR, 0.34; 95% CI, 0.17–0.69;p<0.001) were significantly associated with unplanned readmission. Among patient characteristics, hypertension (HTN) (OR, 2.14; 95% CI, 1.41–3.25; p<0.001), diabetes mellitus (DM) (OR, 1.59; 95% CI, 1.20–2.11; p=0.001), coronary artery disease (CAD) (OR, 2.87; 95% CI, 2.13–3.86; p<0.001), American Society of Anesthesiologists (ASA) physical status grade >2 (OR, 2.13; 95% CI, 1.68–2.72; p<0.001), and anxiety and depression (OR, 1.39; 95% CI, 1.29–1.51; p<0.001) were significantly associated with unplanned readmission. Among the perioperative factors, pulmonary complications (OR, 22.52; 95% CI, 7.21–70.41; p<0.001) was significantly associated with unplanned readmission. Conclusion Male, older age, HTN, DM, CAD, ASA grade >2, anxiety and depression, pulmonary complications were significantly associated with an increased occurrence of unplanned readmission after ACDF.