No abstract available.
Prosthodontics

STATEMENT OF PROBLEM: Implant screw loosening has been remained a problem in implant prosthodontics. The time needed to insert screw driver into abutment screw head should be shortened for the purpose of decreasing the chair time. PURPOSE: The purpose of this study was to investigate the effects of the design of abutment screw driver on the amount of time for insertion of screw driver into abutment screw head. MATERIAL AND METHODS: Hexagonal and rectangular types of abutment screw drivers were used. The original abutment screw drivers were modified by grinding acute angle of the screw driver tip (modified drivers). Group 1 : hexagonal type abutment screw and original driver Group 2 : hexagonal type abutment screw and modified driver Group 3 : rectangular type abutment screw and original driver Group 4 : rectangular type abutment screw and modified driver UCLA lab analogues were located in acrylic resin block. The angulations of them were 0 and 20 degrees. The times needed for insertion were measured. Group 1 and 3 were used as controls. RESULTS: 1. Group 2 showed shorter insertion time than group 1, regardless of implant angulations (p<.05). 2. Group 4 showed shorter insertion time than group 3, regardless of implant angulations (p<.05). CONCLUSION: Modified abutment screw drivers required less amount of time to insert screw driver into abutment screw head. Modification of abutment screw driver was beneficial.
Head* ; Prosthodontics

ABSTRACT Globally, non-syndromic tooth agenesis is commonly seen in clinical practice. However, its management is often complex and requires a multidisciplinary team approach for the maximal outcome. While various treatment options are possible, considerations for the treatment are not only based on the dentofacial conditions but also cultural and social background and personal preference of the patient. Thus, patientcentred care approach should always be practised for an optimal outcome. In the present case, a patient with established craniofacial growth presenting with bilateral agenesis of maxillary lateral incisors and over-retained deciduous maxillary left canine sought for aesthetic improvements. The patient did not prefer any orthodontic treatment citing a prolonged treatment duration and sub-optimal motivation as a hindrance. Thus, a prosthodontic only approach was taken by providing a conventional cantilever bridge and ceramic veneers to achieve the aims of treatment. This article discusses the possible limitation of such prosthodontic only solution in managing tooth agenesis.
Prosthodontics ; Anodontia

The purpose of this study was to investigate the possibility on recycling of IPS-Empress ceramic for the wide use of IPS-Empress ceramic in prosthodontic treatment. The frexure strength of first pressed, second pressed, and third pressed IPS-Empress ceramic were measured and compared. There was no ststistical difference among three groups, and the result of this study implied the recycled IPS-Empress ceramic has enough frexure strength for clinical use.
Ceramics* ; Prosthodontics ; Recycling

STATEMENT OF PROBLEMS: The precision of fit between the bearing surfaces of implant abutments and the prosthesis framework has been considered fundamental to implant prosthodontic protocol. PURPOSE: The study aimed to investigate the effect of laboratory procedure on the dimensional accuracy of cast implant bars. MATERIAL AND METHODS: Thirty implant bars were fabricated on a metal master model. The gap distances were measured at the right implant abutment replica-gold cylinder interface after casting procedure. The bar length data of precasting and postcasting state were collected and analyzed. RESULTS: The mean gap distance found after casting was 106.3 micrometer for buccal side, 122.1 micrometer for distal side and 117.1 micrometer for the lingual side. The mean bar length was 17964.7 micrometer at precasting measurement, 17891.6 micrometer at postcasting measurement. The mean change of bar length was - 73.1 micrometer. CONCLUSION: Even though the techniques used in this study strictly followed the guidelines established in the literature, the 30 cast implant bars evaluated all yielded gap distances that were beyond acceptable accuracy. There was a statistically significant difference between precasting and postcasting bar length (P<0.01). There was a decreasing tendency in bar length after casting procedure. It was necessary to correct this dimensional change from laboratory procedure by some corrective methods.
Prostheses and Implants ; Prosthodontics

PURPOSE: To compare the case of widespread maxillary osteomyelitis treated through different approach. METHOD: We report the two case of osteomyelitis. In a case, we had gradually removed the small amount of sequestrum for several times. In the other case, intended Le Fort I fracture was done to approach the lesion. RESULT: In the gradual sequestrectomy case, bone formations were found after 4 months. In the other case, after intended Le Fort I down fracture, sequestrectomy of Lt. maxilla was done with the labiobuccal alveolar bone preserved for the prosthodontic treatment.
Maxilla* ; Osteomyelitis* ; Prosthodontics

A treatment should be functional, esthetic, conservative and periodontally healthy in order to meet criteria of an ideal dental procedure. in a prsthodontic patient with horizontal and/or vertical space deficiency, orthodontic tooth movement should be considered as a pre-prosthetic procedure. With a conventional technique, orthodontic treatment is a time-consuming and uncomfortable procedure. Pre-prosthetic orthodontic treatment, however, is no longer difficult procedure with the help of recently developed techniques, such as passive bracketing. The present article outlines the problems and causes of horizontal and vertical space deficiency in prosthodontic patients, and presents efficient pre-prosthetic orthodontic treatment modalities with typical clinical cases.
Humans ; Prosthodontics* ; Tooth Movement

Dentists ; Humans ; Prosthodontics

No abstract available.
Ectoderm* ; Ectodermal Dysplasia* ; Prosthodontics*

The purpose of this study was to investigate and evaluate what proportion is the characteristics in Korean dental arches with normal occlusion. Many others have already indicated Golden proportion in normal dental arches, but have not considered any racial and sociocultural differences. So the author postulated (radical2)n relations in Koreans. The materials were consisted of 134 dental casts with normal occlusion, which have never undergone orthodontic and prosthodontic procedures. Measurements were made on the arch dimensions using sliding caliper and data were computerized. The findings were as follows: 1. The width between the distal surfaces of the upper centrals, had (radical2)3 relation with the width between the buccal surfaces of the upper 1st premolars in Koreans. 2. The width between the distal surfaces of the lower laterals had (radical2) relation with the width between the distal surfaces of the lower canines, and had (radical2)2 relation with the distal surfaces of the upper centrals. 3. The width between the distal surfaces of the lower centrals had (radical2)2 relation with the width between the distal surfaces of the lower laterals, and had (radical2)3 relation with the width between the distal surfaces of the upper centrals.
Bicuspid ; Dental Arch* ; Prosthodontics