1.Evaluation on repeat cesarean section of 67 cases
Chinese Journal of Primary Medicine and Pharmacy 2010;17(4):453-454
Objective To explore the complications and influence of repeat cesarean section after previous cesarean delivery. Methods The styles of the total 67 cases of repeat cesarean section were reviewed, and the mater-nal ages, gestarional weeks, time intervals between the two times of delivery, and the styles of the previous cesarean section were analyzed. Results Of the total 67 case of repeat cesarean section ,there were 8 cases with relatively se-vere adhesion, 1 case with hysterectomy. There were 9 cases with intraoperative blood loss over 500ml(13.4%). The rate of adhesion induced by abdominal transverse incision of cesarean section was significantly higher than that of ab-dominal longitudinal incision of low cesarean section. Conclusions When we determining a style of cesarean section, we should comprehensively consider the obstetrical conditions of the pregnant women to select abdominal incision style and uterine incision style. The quality of previous cesarean delivery determines the complications of repeat cesarean section.
2.Study on preparation technology Shuxiong Dropping Pill
Chinese Traditional and Herbal Drugs 1994;0(12):-
Object To optimize the best technical parameters through controlling the different factors. Methods Taking spherical degree and pill weight as index, the above factors were observed by orthogonal test. Results PEG4000 as matrix, methyl silicon oil as refrigerant. Internal and external diameter of burette are 4 1 mm and 6 1 mm, dropping into the refrigerant that composed of 40 ℃—50 ℃,10 ℃—30 ℃,0 ℃—4 ℃ by 20 ℃—30 ℃ droppings per minute. Conclusion The highest finished product with good quality can be got through this process.
3.The report of extreme lateral lumbar disc herniations (15 cases)
Journal of Clinical Surgery 1999;0(05):-
Objective To explore the clinical and CT characteristics of extreme lateral lumbar disc herniations and improve the diagnosis. Methods A retrospective analysis of the clinical and CT manifestations in 15 patients with extreme lateral lumbar disc herniations proved by operation was done. Results Extreme lateral lumbar disc herniation at L4/5 level is more common. Intraforaminal lumbar disc herniations combined with extraforaminal herniation were seen in most cases. The clinical findings often presented lumbar bi-root compression syndromes. Conclusion The clinical presentation combined with CT image is the key to the correct diagnosis.
4.Endocrine glands-derived-vascular endothelial growth factor and tumor
China Oncology 2001;0(02):-
The review is focused on the development and recent research of the first tissue-specific angiogenic molecule,endocrine gland-derived vascular endothelial growth factor(EG-VEGF).It has been found that EG-VEGF only targeted on steroidgenic endocrine organs or cells through G-protein coupled receptor,the phosphorylation of G-protein coupled receptor could activate mitogen-activated protein kinase p44/42 and phosphatidylinositol-3 kinase(PI3K) pathways signal transdution.There are many reports that believes MAPK and PI3K is involved in the regulation of proliferation,migration,survival of endothelial cells and tumor angiogenesis,so EG-VEGF may serve as a potential target for antiangiogenic therapy of cancer in the future.
5.Polyethylenimine Polymer Promotes Gene Transduction of Adenovirus in Vitro
Danping YAN ; Hong ZHANG ; Pin MA
Herald of Medicine 2017;36(8):862-864
Objective To select polyethylenimine polymer with proper molecular weight to enhance the gene expression efficiency of Adenovirus (Ad).Methods Ad was resepcitively complexed with PEI-600,PEI-1 800 and PEI 25 000 by electrostatic adsorption.Afterwards,MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assay was used to investigate the cytotoxicity of the complexes with a serial concentration,followed by cell transduction assay to select the best amount of PEI with fixed dose of Ad.In the further,the physicochemical characteristics of the optimized complexes,Zeta potential,and size distribution were studied.Results MTT showed the higher the PEI moderate molecular weight was,the greater the cytotoxity was.PEI-25 000 showed a greater cytotoxicity than that of PEI-600 and PEI-1 800.As compared with PEI-600 and PEI-25 000,PEI-1 800 significanlty promoted expression of Ad gene in A549 cells.PEI turned the Zeta potential of Ad from negative to positive charge.Conclusion In the three kinds of polymer/adenovirus compounds,the cytotoxicity of the compound is positively correlated with the polymer molecular weight and concentration.The greater molecular weight the polymer as well as the higher the concentration are,the higher the cytotoxicity is.
6.On the Course Teaching of Literature in Adult Medical Students
Chinese Journal of Medical Education Research 2006;0(09):-
Combined with opening the course of literature searching and sample checking of students,to explore the principle of opening the course of literature searching in adult medical students,the optimization of teaching content,the renewal of teaching instruments,so as to provide basis for opening the course of literature searching in adult medical students and improving their ability to gain new knowledge.
7.Influence of convergence angle on the retention of cast metal post and core restorations
Pin ZHOU ; Xinmin CHEN ; Yannan MA ; Yan YANG
Chinese Journal of Tissue Engineering Research 2006;10(37):175-179
BACKGROUND: The residual root of anterior teeth are usually repaired by means of post and cores plus porcelain fused metal crown in clinic, and the retention force is mainly provided by the post because of the deletion of crown, so the retention force provided by the post is directly correlated with the long-term effect of repair.OBJECTIVE: To analyze the changes of retention of cast metal post and core restorations with different convergence angles, and investigate the influence of convergence angles on retention.DESIGN: A repeated observational measurement.SETTING: Department of Prosthodontics, West China School of Stomatology, Sichuan University.MATERIALS: The experiments were carried out in the building of high polymer material of Sichuan University in May 2005. Fifty-four simulated tooth roots were manufactured by the numerical control machine tools.They were divided into six groups according to the convergence angles of post being 0°, 3.93°, 5.71°, 7.48°, 11.31° and 14.71°, with nine specimens in each group.METHODS: ① Manufacture of the standard specimens: The tooth roots with the convergence angles of 0°,3.93°, 5.71°, 7.48°, 11.31° and 14.71° were prepared with the digital control precision machine. ② Manufacture of the cast post and cores: The post and core wax patterns of the specimens were made in the condition similar to the clinical practice. The post and cores were cast and tried in, necessary grinding was made to ensure the adoption of the posts and the specimens. Then the posts were luted to the specimens with ZPC after the posts and the simulated root canals having een cleaned by alcohol. The posts and the specimens were pressed until the ZPC solidified. ③ Retention Force test: After having been dipped in physiological saline for 24 hours, the bonded castings and specimens were subjected to a tensile testing at the drawing speed of 10 mm per minute.The retention force of post was the load recorded when the post was pulled out from the specimen. ④ Planar bonding strength test: We cut a PMMA stick into the same little cylinders and made angular milling on the flank of the cylinders. The angle between the milled bevel and the central axis of the cylinder was controlled to 0°, 1.9°, 3°, 6°, 9°, 12° and 15°. Afterwards we cut the brass into pieces. Eight wafers were cast with the same diameter of 8 mm and thickness of 1 mm. With the same procedure of bonding the posts to specimens, the brass pieces were bonded to the cylinder bevels and the wafers were adhered to the upside of some unmachinized cylinders.Immerged in physiological saline for 24 hours, their bonding force were tested at the speed of 10 mm per minute, and the load was recorded when the pieces and wafers were separated from the cylinders. ⑤ Calculation of the frictional and interlocking forces: As the post can be regarded as a frustum, the bonding surface area can be calculated with the formula calculating the flank area of frustum, and the area of the occlusal bonding surface is the sum of the annulus part of the root surface and the circular part of the post tip. Some regressions were made to the retention force, frictional strength, bonding strength per unit area, retention force per unit area and frictional force per unit area to convergence angles.MAIN OUTCOME MEASURES: ① Bonding strength of different convergence angles; ② Influence of different convergence angles on the area and bonding strength of the post; ③ Retention force and frictional force of posts with different convergence angles; ④ The results of the one-way analysis of variance (ANOVA) of bonding strength, retention force and frictional force per unit area.RESULTS: ① The bonding strength of different convergence angles: It was 0.309 0 N/mm2 for the occlusal plane, 0.128 3 N/mm2 for the axial plane with a convergence angle of 0°, 0.108 7 N/mm2 for the 1.9°axial plane, 0.107 2 N/mm2 for the 3°axial plane, 0.084 9 N/mm2 for the 6°axial plane, 0.056 7 N/mm2 for the 9°axial plane, 0.046 3 N/mm2 for the 12°axial plane, 0.027 4 N/mm2 for the 15°axial plane. ② Bonding strength and bonding area of posts with different convergence angles: The post with a 0°convergence angle had a total post area of 108.047 mm2 and bonding strength of 19.041 N; The most tapered post with 14.71°had a total post area of 90.245 mm2 and bonding strength of 5.131 N. ③ The retention force of cast post and the bonding strength of ZPC declined with the increasing of convergence angles of the post. For the parallel post (convergence angle=0°), the retention force was 321.60 N, the frictional force was 302.559 N, retention force per unit area was 2.976 N/mm2,frictional strength was 3.885 N/mm2; for the most tapered post (convergence angle=14.71°), the retention force was 9.93 N, frictional force was 54.799 N, retention force per unit area was 0.664 N/mm2, frictional force was 0.681 N/mm2. ④ A one-way ANOVA showed that there were significant differences in the bonding strength, retention force and frictional force per unit area among the groups (P < 0.05).CONCLUSION: The retention force, frictional force and the bonding strength of ZPC decrease with the increasing of convergence angles of posts, so the convergence angles of posts should be reduced as much as possible to obtain greater retention.
8.Study on action mechanism of Danhong injection based on computational system biology approach.
Yan-ni LV ; Xiao-hua WEI ; Pin XIAO
China Journal of Chinese Materia Medica 2015;40(3):538-542
Danhong injection is a compound preparation of traditional Chinese medicine Salvia miltiorrhiza and Carthamus tinctorius, and has been widely applied in treating coronary heart diseases and ischemic encephalopathy in clinic. Despite the complexity of its chemical compounds and the diversity of targets, especially in system biology, there have not a report for its action mechanism as a whole regulatory biological network. In this study, protein data of S. miltiorrhiza and C. tinctorius were searched in TCMGeneDIT database and agilent literature search (ALS) system to establish the multi-component protein network of S. miltiorrhiza, C. tinctorius and Danhong injection. Besides, the protein interaction network was built based on the protein-protein interaction in Genecards, BIND, BioGRID, IntAct, MINT and other databases. According to the findings, 10 compounds of S. miltiorrhiza and 14 compounds of C. tinctorius were correlated with proteins. The 24 common compounds had interactions with 81 proteins, and formed a protein interaction network with 60 none-isolated nodes. The Cluster ONE module was applied to make an enrichment analysis on the protein interaction network and extract one sub-network with significant difference P <0.05. The sub-network contains 23 key proteins, which involved five signaling pathways, namely Nod-like receptor signaling pathway, epithelial cell signaling in helicobacter pylori infection, Toll-like receptor signaling pathway, RIG-I-like receptor signaling pathway and neurotrophin signaling pathway through KEGG signaling pathway mapping. In this study, the computational system biology approach was adopted to preliminarily explain the molecular mechanism of main compounds of Danhong injection in preventing and treating diseases and provide reference for systematic studies on traditional Chinese medicine compounds.
Computational Biology
;
Drugs, Chinese Herbal
;
pharmacology
;
Injections
;
Protein Interaction Maps
;
Signal Transduction
9.Alteration of early diastolic flow propagation velocity of left ventricle in hypertrophic cardiomyopathy and its clinical value
Zhibin WANG ; Haiyan WANG ; Jing NIE ; Yan LI ; Pin SUN
Chinese Journal of Ultrasonography 1993;0(02):-
Objective To measure the alteration of early diastolic flow propagation velocity (V P) of left ventricle in patients with hypertrophic cardiomyopathy(HCM),and to investigate its clinical value.Methods Using color M-mode Doppler echocardiography,V P was measured in 52 patients with HCM and 30 healthy volunteers.Results Compared with normal control,V P in patients with HCM was decreased significantly (t= 8.42,P
10.Acute blood glucose fluctuation affects GSH-Px, IL-6, and NF-κB in aorta
Wei ZHANG ; Sheng ZHAO ; Yan LI ; Pin HAN
Journal of Chinese Physician 2015;17(1):71-73,77
Objective To investigate the effect of acute blood glucose on the level of glutathione peroxidase (GSH-Px),interleukin-6 (IL-6),and the expression of nuclear factor-κB (NF-κB).Methods The Wistar rats were infused intermittently or consistently with 50% glucose solution.The level of GSH-Px was investigated with colorimetry.The level of IL-6 was measured with enzyme-linked immunosorbent assay (ELISA).The expression of NF-κB was investigated with immunohistochemisty.Results The level of GSH-Px in aorta homogenate in the acute blood glucose fluctuation group [(6.26 ± 0.38) nmol/mgprot] was evidently lower than that of consistently high blood glucose group [(8.98 ± 0.56) nmol/mgprot] and the control group [(10.02 ±1.10)nmol/mgprot] (P <0.05).The level of IL-6 [(20.56 ±3.78)pg/ ml] and the expression of NF-κB in the aorta in the acute blood glucose fluctuation group [(16.35 ±2.45) pg/ml] were evidently higher than the other two groups (P < 0.05).Conclusions Acute glucose fluctuations induced the enhancing of oxidative stress and expression of inflammatory cytokines in the aorta,which leads to start NF-κB signaling pathway.