OBJECTIVE: To study and compare the effects of different demineralization-inhibition methods on the shear bond strength (SBS) and fracture mode of an adhesive used to bond orthodontic brackets to demineralized enamel surfaces. METHODS: Eighty freshly extracted, human maxillary premolars were divided into 4 equal groups and demineralized over the course of 21 days. Brackets were bonded to the demineralized enamel of teeth in Group 1. In Group 2, bonding was performed following resin infiltration (ICON(R), DMG, Hamburg, Germany). Before bonding, pre-treatment with acidulated phosphate fluoride (APF) or solutions containing casein phosphopeptide-amorphous calcium phosphate with 2% neutral sodium fluoride (CPP-ACP/wF) was performed in Groups 3 and 4, respectively. The SBS values of the brackets were measured and recorded following mechanical shearing of the bracket from the tooth surface. The adhesive remnant index (ARI) scores were determined after the brackets failed. Statistical comparisons were performed using one-way ANOVA, Tukey's post-tests, and G-tests. RESULTS: Significant differences were found in some of the intergroup comparisons of the SBS values (F = 39.287, p < 0.001). No significant differences were found between the values for the APF-gel and control groups, whereas significantly higher SBS values were recorded for the resin-infiltrated and CPP-ACP/wF-treated groups. The ARI scores were also significantly different among the 4 groups (p < 0.001). CONCLUSIONS: Tooth surfaces exposed to resin infiltration and CPP-ACP/wF application showed higher debonding forces than the untreated, demineralized surfaces.
Acidulated Phosphate Fluoride ; Adhesives ; Bicuspid ; Calcium ; Calcium Phosphates ; Caseins ; Dental Enamel ; Humans ; Oral Hygiene ; Orthodontic Brackets ; Sodium Fluoride ; Tooth

ABSTRACT PURPOSE: Synthetic bone products such as biphasic calcium phosphate (BCP) are mixtures of hydroxyapatite (HA) and a- tricalcium phosphate (a- TCP). In periodontal therapies and implant treatments, BCP provides to be a good bone reconstructive material since it has a similar chemical composition to biological bone apatites. The purpose of this study was to compare bone regeneration capacity of two commercially available BCP. METHODS: Calvarial defects were prepared in sixteen 9-20 months old New Zealand White male rabbits. BCP with HA and a- TCP (70:30) and BCP with Silicon-substituted hydroxyapatite (Si-HA) and a-TCP (60:40) particles were filled in each defect. Control defects were filled with only blood clots. Animals were sacrificed at 4 and 8 week postoperatively. Histomorphometric analysis was performed. RESULTS: BCP with HAand a- TCP 8 weeks group and BCP with Si-HA and a- TCP 4 and 8 weeks groups showed statistically significant in crease (P<0.05) in augmented area than control group. Newly formed bone area after 4 and 8 weeks was similar among all the groups. Residual materials were slightly more evident in BCP with HA and a- TCP 8 weeks group. CONCLUSIONS: Based on histological results, BCP with HA and a- TCP and BCP with Si-HA and a- TCP appears to demonstrate acceptable space maintaining capacity and elicit significant new bone formation when compared to natural bone healing in 4 and 8 week periods.
Animals ; Apatites ; Bone Regeneration ; Bone Substitutes ; Calcium ; Calcium Phosphates ; Durapatite ; Humans ; Hydroxyapatites ; Male ; New Zealand ; Osteogenesis ; Rabbits

OBJECTIVETo investigate the functions of sodium tripolyphosphate (STTP) and polyacrylic acid (PAA) in the process of collagen biomimetic mineralization. This would allow future applications to other collagen matrices such as bone collagen or 3-D collagen scaffolds.

METHODSGlass cover slips and transmission electron microscopy (TEM) grids were coated with reconstituted typeIcollagen fibrils. Mineralization of the reconstituted collagens was demonstrated with scanning electron microscopy (SEM) and TEM using a Portland cement-containing resin composite and a phosphate-containing fluid in the presence of PAA and STTP. The rest were immersed in a biomimetic remineralization medium without PAA and/or STTP (control).

RESULTSIn the presence of PAA and STTP in the mineralization medium, intrafibrillar mineralization based on the non-classical crystallisation pathway could be identified. Mineral phases were evident within the collagen fibrils as early as 12 h after the initially-formed amorphous calcium phosphate nanoprecursors were transformed into apatite nanocrystals. Collagens at 72 h were heavily mineralized with periodically arranged intrafibrillar apatite platelets. Conversely, only large mineral spheres with no preferred association with collagen fibrils were observed in the absence of biomimetic analogues in the medium (control).

CONCLUSIONSIntrafibrillar apatite deposition can be achieved via biomimetic mineralization system containing PAA and STTP when amorphous calcium phosphate precursor is stabilized.

Acrylic Resins ; chemistry ; Apatites ; Biomimetics ; Bone and Bones ; Calcium Phosphates ; Collagen ; Collagen Type I ; chemistry ; Composite Resins ; Humans ; Microscopy, Electron, Transmission ; Minerals ; Phosphates ; Polyphosphates ; chemistry ; Tissue Scaffolds

OBJECTIVES: The purpose of this study was to evaluate the bleaching effect of chewing gum containing amorphous calcium phosphate (ACP), hydroxyapatite (HA), and tricalcium pyrophosphate (TSP) on human enamel. METHODS: Seventy-three subjects aged 20-30 years were recruited after obtaining their informed consent and approval of the Institutional Review Board. All subjects were randomly assigned to the following four groups: (I) negative control group; (II) 50% gum group; (III) 100% gum group; and (IV) positive control group (10% carbamide peroxide). They received gum containing ACP, HA, and TSP, three times a day, for 4 weeks. Group IV also received 10% CP application using individual trays, once a day, for 2 weeks. Color change was measured using the Shade Eye-NCC colorimeter at weekly intervals, during the 4-week period. Statistical analysis was performed using SPSS 18.0. RESULTS: Color changes (DeltaE*) were significantly different among the groups at 2 and 4 weeks after chewing the gum (P<0.05). Given that bleaching effect of Group IV was 100%, bleaching effects of Group III, Group II, and Group I were 54%, 46%, and 36%, respectively. CONCLUSIONS: Chewing gum containing ACP, HA, and TSP was effective enough to bleach the human enamel. Further comprehensive studies and assessment will be required to ascertain the bleaching effects and mechanism of chewing gum containing various components such as ACP, HA, and TSP using various methods of experiment and analysis.
Aged ; Calcium ; Calcium Phosphates ; Chewing Gum ; Dental Enamel ; Diphosphates ; Durapatite ; Ethics Committees, Research ; Gingiva ; Humans ; Informed Consent ; Mastication ; Urea

Bone-like apatite formation on the surface of calcium phosphate ceramics has been believed to be the prerequisite of new bone growth on ceramics and to be related to the osteoinductivity of the material. The research of the factors effecting bone-like apatite formation is a great help in understanding the mechanism of osteoinduction. This paper is aimed to a comparative study of in vitro formation of bone-like apatite on the surface of dense and rough calcium phosphate ceramics with SBF flowing at different rates. The results showed that the rough surface was beneficial to the formation of bone-like apatite, and the apatite formed faster in 1.5 SBF than in SBF. Rough surface, namely, larger surface area, increased the dissolution of Ca2+ and HPO4(2-) and higher concentration of Ca2+ and HPO4(2-) ions of SBF and was in turn advantageous to the accumulation of Ca2+, HPO4(2-), PO4(3-) near the ceramic surface. Local supersaturating concentration of Ca2+, HPO4(2-), PO4(3-) near sample surface was essential to nucleation of apatite on the surface of sample.
Apatites ; Biocompatible Materials ; Calcium Phosphates ; Ceramics ; Materials Testing ; Surface Properties

OBJECTIVETo establish an in vitro model for the apatite crystal mineralization. To evaluate the influences of bovine serum albumin (BSA) and fluoride to the mineralization of apatite crystal.

METHODSThe model was constructed using cation selective membrane (CMV) and dialysis membrane. Double distilled water (DDW), BSA, 5, 20, 100 mg x L(-1) fluoride were added into the reaction space of the model. Reaction was carried out at 37 degrees C for 3 days under gentle stirring. The crystals were identified by scanning electron microscope (SEM) and X-ray diffraction (XRD).

RESULTSThe model was established successfully. When DDW and BSA were added respectively, the main component of the deposit was octacalcium phosphate (OCP), but the shape and size of the crystals differs from each other. When fluoride with different concentration were added, the main component of the crystal turned to rod-like and prism-like fluoroapatite (FAP) crystal. The size and crystallinity of the FAP increased with the increase of the fluoride concentration.

CONCLUSIONIt is an effective way to evaluate the influence factors of the apatite crystal mineralization by using the in vitro model.

Apatites ; Calcium Phosphates ; Crystallization ; Fluorides ; In Vitro Techniques ; Phosphates ; X-Ray Diffraction

Calcium pyrophosphate dihydrate (CPPD) crystal deposition disease is an inflammatory arthropathy that is defined by the deposition of CPPD crystals in articular and periarticular structures. CPPD crystal deposition disease has various clinical manifestation patterns ranging from an absence of symptoms to a severely destructive arthropathy. CPPD crystal deposition disease very rare with rheumatoid arthritis or systemic sclerosis. We report a case of CPPD crystal deposition disease combined in a patient with rheumatoid arthritis and systemic sclerosis.
Arthritis, Rheumatoid ; Calcium Pyrophosphate ; Diphosphates ; Humans ; Scleroderma, Systemic

OBJECTIVEThe effect of the different fertilizing levels on yields and main active components of Pinellia ternata from Sichuan was studied under the cultivated condition, in order to provide theoretical basis for the standardized cultivation.

METHODUsing one of the wild populations of P. ternate from Sichuan as tested material, the experiment was performed with orthogonal designing methods L25 (5(3)). During growth and development period, agronomic traits such as number of sprouting, inflorescence and bulblets were counted. After harvesting, main chemical compositions, growth and proliferation rates were determined.

RESULTIn different fertilizing levels, the P. ternata from Sichuan showed the same growth rhythm, though there were significant difference (P < 0.05) among the average emergence rate,whereas extremely significant difference (P < 0.01) were detected among the average ratio of bolting, the average bulbils, individual growth rate, individual proliferation rate, beta-sitosterol and alkaloid content under different fertilizing levels. Nitrogenous fertilizer that affected the content of alkaloids and beta-sitosterol were extremely significant (P < 0.01), whereas phosphate and potassium fertilizer had no significant effect. The effect of fertilizer factor and inter effects on beta-sitosterol showed no significant effect, but have influence on other indexes.

CONCLUSIONThe optimum fertilizer composition was 315 kg x hm(-2) of nitrogen, 225 kg x hm(-2) of P2O5 and 270 kg x hm(-2) of K2O.

Alkaloids ; analysis ; Fertilizers ; Nitrogen Compounds ; analysis ; Phosphates ; analysis ; Phosphorus Compounds ; analysis ; Pinellia ; chemistry ; growth & development ; Potassium Compounds ; analysis ; Sitosterols ; analysis

Accidents ; Humans ; Organophosphorus Compounds ; Phosphorus Compounds

OBJECTIVETo investigate the apatite forming ability of pure titanium implant after micro-arc oxidation treatment in simulated body fluid (SBF) and obtain implants with calcium phosphate (Ca-P) layers.

METHODSThe implants were immersed in (SBF) after micro-arc oxidation treatment for different time lengths, and their apatite forming ability and the morphology and constituents of the Ca-P layers formed on the sample surface were analyzed using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and energy dispersive electron probe.

RESULTSAfter immersion in SBF, large quantities of Ca-P layers were induced on the surface of the samples. The Ca-P layers were composed of octacalcium phosphate and carbonated hydroxyapatite, and the crystals showed a plate-like morphology with an oriented growth.

CONCLUSIONThe implants with micro-arc oxidation treatment show good apatite forming ability on the surface with rich calcium and phosphorus elements. The formed layers are composed of bone-like apatite including octacalcium phosphate and carbonated hydroxyapatite.

Apatites ; chemistry ; Biomimetic Materials ; chemistry ; Body Fluids ; chemistry ; Calcium Phosphates ; chemistry ; Coated Materials, Biocompatible ; chemistry ; Durapatite ; chemistry ; Oxidation-Reduction ; Prostheses and Implants ; Random Allocation ; Surface Properties ; Titanium ; chemistry