INTRODUCTION: To prevent hemodialysis-related infections, it is important to maintain hemodialysis system without microbial contamination. In May 2003, routine surveillance showed that dialysis water from dialysis port was contaminated with bacteria. To identify the causes of the contamination, we conducted an investigation as follows. METHODS: Patients undergoing dialysis were carefully monitored to see whether evidences of pyrogenic reactions or infections were present. Factors that could have influence on bacterial contamination in hemodialysis systems were thoroughly examined. In addition, microbiologic surveillances were done 7 times in 1 month. RESULTS: Although pyrogenic reactions or bacteremia did not occur, R. pickettii was repeatedly isolated above the Association for the Advancement of Medical Instrumentation (AAMI) standards from almost all dialysis units. Bacterial counts of specimens were higher in the proximal part of the water supply tube than the other parts in all dialysis machines. The colony count of R. pickettii exceeded the maximum level of technical limit in the specimens collected from the dialysis machines in the early morning after intermission of 48 hours. The structure of the supply tube was suspected as the origin of the colonization because stagnant water is a reservoir for bacterial multiplication. After remodeling the structure of the water supply tube, neither R. pickettii nor any other bacteria were isolated. CONCLUSION: Our investigation successfully identified the source of R. pickettii contamination of reverse osmosis water. Appropriate corrective measures for water distribution systems of hemodialysis center could prevent outbreak of dialysis-associated illnesses.
Bacteremia ; Bacteria ; Bacterial Load ; Colon ; Dialysis ; Humans ; Osmosis ; Ralstonia ; Ralstonia pickettii ; Renal Dialysis ; Water ; Water Supply

Effervescent technique, which can accelerate drug disintegration and dissolution, is usually applied in quick release preparations. Along with the development of pharmaceutical technique and theory, effervescent technique is used more and more extensively to adjust the behavior of drug release, such as in sustained and controlled release preparations, pulsatile drug delivery systems, and so on. This review demonstrated the new applying of effervescent technique in effervescent tablets, stomach floating forms, osmotic pump tablets and pulsatile drug delivery systems, adding to the critical common technique of effervescent forms in drug research. This will be benefit for the further research and development of effervescent technique.
Dosage Forms ; Drug Delivery Systems ; Humans ; Osmosis ; Pharmaceutical Preparations ; administration & dosage ; Tablets

OBJECTIVETo investigate the feasibility of swelling hydrogel instead of polyethylene oxide as swelling polymer in push-layer of push-pull osmotically controlled-release tablets.

METHODThe swelling patterns of tablets made of pure polymers were studied by immerging the tablets into purified water and testing their size at different time points. The push-pull osmotic-pump tablets were prepared and their release patterns in vitro were studied and compared by their similar factor (f2).

RESULTTablets with different swelling materials all showed satisfying release pattern in vitro and their release ratio at 12 h were all above 80%.

CONCLUSIONWith its release rate and cumulative release percentage at 12 h, the mixture of HPMC K15M and CMCNa in ratio of 1:1 is the best choice instead of polyethylene oxide as swelling polymer in push-layer.

Chemistry, Pharmaceutical ; Drug Carriers ; chemistry ; Osmosis ; Polymers ; chemistry ; Tablets ; Water ; chemistry

This investigation was amied at the infiltrative capability of the machinable-infiltrated-ceramic(MIC) glass and the color of the composite after the MIC glass infiltrated through the aluminous matrix with different packing densities. By heating the components to 1100 degrees C for 2 hours, the MIC glass was made to infiltrate through the aluminous matrix with different packing densities. We measured the infiltrative depth and the color parameter and observed the rupture surface of the composite by means of SEM. There was a linear relation between the square of infiltrative depth and the packing density of aluminous matrix. The minimal depth was 3.092 mm. No relationship was noted between the composite's color coefficient and the packing density of aluminous matrix. In the rupture process of the composite, crack deflexion, crystal evulsion, and rupture through crystal could be observed. This experiment proved that the infiltrative characters of MIC glass meet the clinical requirement, the composite's color is steady and the mechanical intensity is stable.
Aluminum Oxide ; chemistry ; Ceramics ; chemistry ; Color ; Dental Porcelain ; chemistry ; Hardness ; Materials Testing ; Osmosis

The concentration of extract of traditional Chinese medicine (TCM) is one of the important unit operations that affect the quality of the pharmaceutical products. However, there are some problems to be solved. The concentration process has the shortages of relatively high temperature, relatively long time or low efficient, some losses of active and volatile ingredients, more operation steps, easy fouling and emission of waste water. In order to solve these problems, many new technologies and installations have been developed in the past thirty years, including suspension freeze-concentration, progressive freeze-concentration, single- or multi-effect evaporation with an external natural circulating flow, on-line preventing fouling evaporation with vapor-liquid-solid flow, reverse osmosis concentration, membrane distillation, osmotic distillation, macro-porous resin adsorption etc. The system of the extract of TCM is very complex. The extract includes water and alcohol extracts. The composition of TCM is made of active and inactive ingredients. Hence, it is necessary to master the features of every concentration technologies and installations, including their merits and demerits, flexibilities, degree of maturations of techniques and so on to get a wise choice for the industry applications. New concentration technologies and installations of the extract of TCM developed recently are reviewed in this paper. The characteristics of each method are analyzed and discussed in order to guide the industry applications. At the same time, the further research directions of concentration techniques of extract of TCM are also given.
Drugs, Chinese Herbal ; administration & dosage ; isolation & purification ; Freezing ; Osmosis ; Plants, Medicinal ; chemistry ; Technology, Pharmaceutical ; methods ; Temperature

OBJECTIVETo study the variation in plasma concentration after oral administration of Danshen multi-component osmotic pump tablets in Beagle dogs with conventional Danshen tablets as the control preparation, in order to assess the sustained release of Danshen multi-component osmotic pump tablets.

METHODHPLC was adopted for determination, with Shimadzu's ODS-SP column (4.6 mm x 150 mm, 5 microm), flow rate of 1 mL x min(-1), and column temperature of 30 degrees C. Protein in plasma samples of tanshinone II(A) and salvianolic acid B was removed by ethyl acetate extract and acetone precipitation method respectively. Their pharmacokinetic parameters were calculated based on determination results.

RESULTThe methodology study on the two constituents with different polarity showed conformity to the requirements. Compared with conventional Danshen tablets, Danshen multi-component osmotic pump tablets showed decrease in Cmax and extension in Tmax after oral administration in Beagle dogs.

CONCLUSIONDanshen multi-component osmotic pump tablet has a good sustained-release effect compared with conventional Danshen tablets.

Animals ; Dogs ; Drugs, Chinese Herbal ; pharmacokinetics ; Male ; Osmosis ; Salvia miltiorrhiza ; chemistry ; Tablets ; Time Factors

OBJECTIVETo study the role of RpoE and RpoS on the influence of the metabolism and growth of bacterial under hyperosmotic stress.

METHODSThe rpoS/rpoE double deletion mutant of Salmonella enterica serovar typhi (S. typhi) was prepared by homologous recombination through the suicide plasmid mediated. The recombination was visualized by PCR. Growth curves were drawn by using photometric value A600 as the ordinate and cultivation time as abscissa. The survival abilities of bacterial were compared under hyperosmotic stress. Statistical differences of early logarithmic growth stage (4 h) and laters logarithmic growth stage (12 h) were analyzed by one-way ANOVA. The expression difference of metabolism related genes of wild-type and mutant strains of S. Typhi incubated under hyperosmotic stress were investigated by Salmonella genomic DNA microarray. Real-time quantitative PCR (qRT-PCR) was performed to validate the results of microarray assay in some selected genes.

RESULTSThe rpoS/rpoE double deletion mutant of S. Typhi was successfully generated. The analysis of growth curve showed that the 4-hour and 12-hour A600 values were separately 0.503 ± 0.018 and 2.060 ± 0.112 in rpoS deletion mutant strains, 0.293 ± 0.053 and 1.933 ± 0.115 in rpoE deletion mutant strains, and 0.051 ± 0.007 and 0.963 ± 0.111 in rpoS/rpoE double deletion mutant strains; all of which were lower than the values of wild-type strains, who were 0.725 ± 0.097 and 2.496 ± 0.171, respectively. The difference were statistically significant (P < 0.05). The genomic DNA microarray revealed that 42 genes relevant with bacterial metabolism were influenced by RpoE and RpoS. Results of qRT-PCR showed that the expression values of rpsE, rbsK, nusG and etuB in rpoS deletion mutant strains were (1.86 ± 0.14)×10(6), (1.37 ± 0.11)×10(6), (2.72 ± 0.58)×10(6) and (8.27 ± 1.01)×10(6) copies/µg, respectively; while those in rpoE deletion mutant strains were (2.19 ± 0.17)×10(6), (1.51 ± 0.12)×10(6), (2.73 ± 0.57)×10(6) and (9.63 ± 1.42)×10(6) copies/µg, respectively. Compared with the values in wild-type strains, which were separately (1.94 ± 0.10)×10(6), (1.52 ± 0.11)×10(6), (2.39 ± 0.52)×10(6) and (10.83 ± 1.52)×10(6) copies/µg, the differences was not statistical significance (P > 0.05). However, compared with the values in rpoS/rpoE double mutant strains, which were separately (5.64 ± 0.59)×10(6), (4.17 ± 0.40)×10(6), (9.44 ± 1.22)×10(6) and (2.95 ± 0.88)×10(6) copies/µg, the difference was significant (P < 0.05).

CONCLUSIONRpoE and RpoS could influence the expression of lots of metabolism genes. Together, they regulated the metabolism and growth of S. Typhi under hyperosmotic stress.

Bacterial Proteins ; genetics ; Gene Deletion ; Osmosis ; Salmonella typhi ; genetics ; growth & development ; metabolism ; Sigma Factor ; genetics ; Stress, Physiological

OBJECTIVETo prepare effervescent osmotic pump tablet (EOPTs) according to the rhythm of coronary heart disease based on efficacy material and the mechanism of compound Danshen and to study the mechanism of drug released of that tablets.

METHODSince compound Danshen consist of compounds with polyphenolic groups or carboxyl groups, such as phenolic acids, flavonoids, and triterpenoids that they were acidic. EOPTs were prepared from tablet cores which containing NaHCO3 as effervescent, NaCL and manitol as osmotic agents, HPMC as retarding agents coating with CA membrane. And study the mechanism of drug released according to the change of tablet osmotic pressure.

RESULTThe results of in vitro experiments showed that no difference was observed among the profiles of Danshensu, protocatechuic aldehyde, ginsenoside Rg1, Rb1, notoginsenoside R1 release EOPTs. The drug was completely released from the device with a zero-order release rate over 12 h.

CONCLUSIONEOPTs are Successfully obtained EOPT which the drug is released from the device over 12 h and the release mechanism of EOPTs is explained.

Coronary Disease ; physiopathology ; Drug Compounding ; Drugs, Chinese Herbal ; administration & dosage ; metabolism ; Infusion Pumps ; Osmosis ; Salvia miltiorrhiza ; metabolism ; Tablets ; Time Factors

The aim of this study was to evaluate the effect of mouthrinse products containing deep sea water. We used original deep sea water (DSW) and processed deep sea water desalinated by reverse osmosis at one time (DDW-1), by reverse osmosis at two times (DDW-2) and concentrated by reverse osmosis (CDW). We made 2 kinds of mouthrinse products containing CDW and other agents for smell and taste and one product without deep sea water. The negative control was distilled water. In vivo study, the dental plaque index scores and the gingival index scores were reduced after 4 weeks mouthrinsing three times daily with 4 kinds of deep sea water and 3 kinds of mouthrinse products(p<0.05). The pH of dental plaque in 1 minute after mouthrinsing was not higher than 5.5 in all solutions, but the pH in 20 minutes after mouthrinsing was higher than 5.7 in DSW, CDW and 3 kinds of products which had higher mineral contents. In vitro study, the mouthrinse solutions containing the higher mineral contents were also the more effective in reduction of methyl mercaptan which is one of the causes of halitosis. The 2 kinds of products containing deep sea water killed Streptococcus mutans (ATCC 25175) in culture plates in one minute. These results indicate the usability of deep sea water in mouthrinses for oral hygiene management.
Dental Plaque ; Dental Plaque Index ; Halitosis ; Hydrogen-Ion Concentration ; Oral Hygiene ; Osmosis ; Periodontal Index ; Seawater* ; Smell ; Streptococcus mutans ; Water

The purpose of this study is to design push-pull osmotic pump (PPOP) tablets of famotidine using the expert system for the formulation design of osmotic pump of poor water-soluble drug which had been established by the authors. Firstly, the parameters which were requisite of the system input were obtained from literatures and experimental tests. Then the parameters were input into the system, and the program was run. The system displayed the designed formulations sequential. Finally, famotidine PPOP was prepared according to the designed formulations and the in vitro dissolution was carried out. It was found out that the target formulation of famotidine PPOP which could release for 24 hours was obtained in a very short period. Meanwhile, the practicability of the established expert system was proved.
Delayed-Action Preparations ; Drug Delivery Systems ; methods ; Excipients ; chemistry ; Expert Systems ; Famotidine ; administration & dosage ; chemistry ; Osmosis ; Solubility ; Tablets ; Water