As a high-quality moxibustion material, Artemisia stolonifera has high economic value and research prospects. However, due to difficulties in seed germination, its wild germplasm resources are sparsely distributed in China. This study used young stem segments grown in the current year to investigate the effects of explant sterilization, different combinations and concentrations of plant growth regulators on the proliferation and rooting of adventitious shoots, with the aim of constructing an in vitro rapid propagation technology system for A. stolonifera. The results showed that the lowest contamination rate of 25.83% was achieved when sterilizing the stem segments by rinsing with running water for 30 min, soaking in 75% ethanol for 30 s, followed by a 5 min treatment with 0.1% HgCl_2, 10 min with 8% NaClO, and 10 min with 0.6% phytosaniline. There was no browning of the stem segments, and surface sterilization of the A. stolonifera stem segments was successfully achieved. In the induction culture phase, when the concentration of kinetin(KT) was 0.05 mg·L~(-1) and 6-benzylaminopurine(6-BA) was 0.05 mg·L~(-1), the adventitious shoot proliferation coefficient was 2.02, effectively promoting the proliferation and growth of A. stolonifera. In the rooting culture phase, 0.1 mg·L~(-1) 1-naphthaleneacetic acid(NAA) effectively induced A. stolonifera test-tube seedlings to root within a short period, achieving a rooting rate of 100%. The addition of a small amount of activated charcoal also promoted rooting and strengthened seedling growth. The survival rate of A. stolonifera seedlings transplanted into a substrate consisting of 90% nutrient soil and 10% perlite was 100%. This study established an efficient in vitro rapid propagation system for A. stolonifera, overcoming difficulties with seed germination, shortening the breeding cycle, and reducing production and planting costs. It provides technical support for the introduction, domestication, seedling propagation, germplasm conservation, and industrial development of A. stolonifera.
Artemisia/drug effects* ; Tissue Culture Techniques/methods* ; Plant Growth Regulators/pharmacology* ; Plant Stems/drug effects* ; Plant Shoots/drug effects*

The medicinal materials of Bawei Chenxiang Pills(BCPs) were extracted via three methods: reflux extraction by water, reflux extraction by 70% ethanol, and extraction by pure water following reflux extraction by 70% ethanol, yielding three extracts of ST, CT, and CST. The efficacy of ST(760 mg·kg~(-1)), CT(620 mg·kg~(-1)), and CST(1 040 mg·kg~(-1)) were evaluated by acute myocardial ischemia(AMI) and p-chlorophenylalanine(PCPA)-induced insomnia in mice, respectively. Western blot was further utilized to investigate their hypnosis mechanisms. The main chemical components of different extracts were identified by the UPLC-Q-Exactive-MS technique. The results showed that CT and CST significantly increased the ejection fraction(EF) and fractional shortening(FS) of myocardial infarction mice, reduced left ventricular internal dimension at end-diastole(LVIDd) and left ventricular internal dimension at end-systole(LVIDs). In contrast, ST did not exhibit significant effects on these parameters. In the insomnia model, CT significantly reduced sleep latency and prolonged sleep duration, whereas ST only prolonged sleep duration without shortening sleep latency. CST showed no significant effects on either sleep latency or sleep duration. Additionally, both CT and ST upregulated glutamic acid decarboxylase 67(GAD67) protein expression in brain tissue. A total of 15 main chemical components were identified from CT, including 2-(2-phenylethyl) chromone and 6-methoxy-2-(2-phenylethyl) chromone. Six chemical components including chebulidic acid were identified from ST. The results suggested that chromones and terpenes were potential anti-myocardial ischemia drugs of BCPs, and tannin and phenolic acids were potential hypnosis drugs. This study enriches the pharmacological and chemical research of BCPs, providing a basis and reference for their secondary development, quality standard improvement, and clinical application.
Animals ; Drugs, Chinese Herbal/isolation & purification* ; Mice ; Male ; Sleep Initiation and Maintenance Disorders/physiopathology* ; Humans ; Myocardial Infarction/drug therapy* ; Myocardial Ischemia/drug therapy*

The commonly used mechanical thrombectomy devices were introduced in terms of the working principle,advantages,disadvantages and clinical effects.The complications by mechanical thrombectomy devices used for thrombosis clearance were summarized,and the causes were analyzed and some countermeasures were put forward accordingly.It's pointed out mechanical thrombectomy devices would be improved in intelligence,automation,precision,individualization and remote control in the future.[Chinese Medical Equipment Journal,2025,46(8):79-85]

Osteopontin(OPN)is a multifunctional protein,widely distributed in a variety of cells,tissues,organs and body fluids.This protein has a classical RGD domain and can bind to a variety of integrins and CD44 receptors,thereby participating in various pathological processes in the body,such as infection,allergic reaction,autoimmune and tissue damage.Recently,many studies have revealed that OPN is highly expressed in the central nervous system(CNS)and plays different regulatory roles in CNS diseases,that is,OPN can play a pro-inflammatory role in some conditions to stimulate neurotoxicity,while it can play a neuroprotective role in other conditions.While there has been growing interest in the biological role of OPN in the CNS,a comprehensive review is currently lacking.The purpose of this paper is to provide an overview of the expression and function of OPN in the CNS,with a focus on microglia,astrocytes,and neurons.

Osteopontin(OPN)is a multifunctional protein,widely distributed in a variety of cells,tissues,organs and body fluids.This protein has a classical RGD domain and can bind to a variety of integrins and CD44 receptors,thereby participating in various pathological processes in the body,such as infection,allergic reaction,autoimmune and tissue damage.Recently,many studies have revealed that OPN is highly expressed in the central nervous system(CNS)and plays different regulatory roles in CNS diseases,that is,OPN can play a pro-inflammatory role in some conditions to stimulate neurotoxicity,while it can play a neuroprotective role in other conditions.While there has been growing interest in the biological role of OPN in the CNS,a comprehensive review is currently lacking.The purpose of this paper is to provide an overview of the expression and function of OPN in the CNS,with a focus on microglia,astrocytes,and neurons.

The commonly used mechanical thrombectomy devices were introduced in terms of the working principle,advantages,disadvantages and clinical effects.The complications by mechanical thrombectomy devices used for thrombosis clearance were summarized,and the causes were analyzed and some countermeasures were put forward accordingly.It's pointed out mechanical thrombectomy devices would be improved in intelligence,automation,precision,individualization and remote control in the future.[Chinese Medical Equipment Journal,2025,46(8):79-85]

The conversion of carbon dioxide into high value-added energy has become a research hotspot.In this study,by using Ti3AlC2 and CuCl2·2H2O as precursors,accordion-like two-dimensional Cu0/Cu2+-Ti3C2Tx catalysts modified with Cu0 nanoparticles and Cu2+ self-intercalation were successfully prepared for electrocatalytic reduction of CO2.The performance of the material was tested,and the results showed that in a CO2-saturated 0.5 mol/L KHCO3 electrolyte solution,compared with the original Ti3AlC2,the initial potential of the electrocatalytic conversion of CO2 to C2H4 over Cu0/Cu2+-Ti3C2Tx catalyst decreased from ?0.65 V(vs RHE)to?0.01 V(vs RHE).The maximum current density increased from 0.19 mA/cm2 to 2.5 mA/cm2,the double layer capacitance(Cdl)value increased from 2.61 mF/cm2 to 55.06 mF/cm2.The material showed higher catalytic activity and faster electron transfer rate(Charge transfer resistance(Rct)value was only 16.9 Ω).Moreover,the material showed high electrochemical active area and excellent stability.This research provided a promising method for designing and preparing elcetrocatalytic reduction(ECR)catalysts in the future.

OBJECTIVE:The rabbit model of steroid-induced osteonecrosis of femoral head is the most commonly used animal model of femoral head necrosis.The pathological changes of the femoral head are close to clinical practice,however,the conditions,methods and evaluation standards of animal models reported in and outside China are not uniform,which leads to the low scientific value of animal models and is difficult to popularize.This study aimed to clarify the influence of different mold-making conditions on the establishment of steroid-induced osteonecrosis of femoral head rabbit model and analyze the appropriate conditions for the successful model establishment. METHODS:We searched the CNKI,WanFang,VIP,CBM,WoS,PubMed and EMbsae databases for the literature on the modeling of steroid-induced osteonecrosis of femoral head rabbits up to April 1,2022,completed the screening of the literature according to the inclusion and exclusion criteria and literature quality evaluation,and extracted the outcome index data in the literature.RevMan Stata and ADDIS statistical software were used to conduct a meta-analysis of the included data. RESULTS:(1)A total of 82 articles with 1 366 rabbits were included in the study.The steroid-induced osteonecrosis of femoral head modeling methods were divided into three types:steroid-alone method,steroid combined lipopolysaccharide method and steroid combined serum method.Among these,33 articles used steroid-alone method;20 articles used steroid combined lipopolysaccharide method;29 articles used steroid combined serum method.(2)Meta-analysis results showed that the three modeling methods significantly increased the rate of empty bone lacunae in the femoral head of steroid-induced osteonecrosis of femoral head rabbits(P<0.001),and significantly decreased the ratio of the trabecular bone area in the femoral head of steroid-induced osteonecrosis of femoral head rabbits(P<0.001).The order of empty bone lacunae rate of each modeling method was:steroid combined with lipopolysaccharide method>steroid-alone method>steroid combined with serum method>normal group,and the order of trabecular bone area rate of each modeling method was:normal group>steroid combined with serum method>steroid-alone method>steroid combined with lipopolysaccharide method.(3)The results of subgroup analysis suggested that the rate of empty bone lacunae in the rabbit model induced by steroid alone might be related to the rabbit variety and the type of steroid used for modeling(difference between groups P<0.05),in which the combined effect amount of New Zealand white rabbits was higher than that of Chinese white rabbits(P<0.05)and Japanese white rabbits,and the combined effect amount of dexamethasone was higher than that of other steroids.The rate of empty bone lacunae induced by steroid combined with lipopolysaccharide was related to the administration mode of lipopolysaccharide and the type of steroid(P<0.05),among which the combined effect of methylprednisolone sodium succinate was significantly higher than that of other steroids(P<0.05),and the combined effect of prednisolone was significantly lower than that of other steroids(P<0.05).The combined effect of lipopolysaccharide 100 μg/kg×twice was significantly lower than 10 μg/kg×twice and 50 μg/kg×twice(P<0.05).The rate of empty bone lacunae in the model induced by steroid combined with serum was related to serum dose and steroid type(P<0.05),among which the combined effect amount of dexamethasone sodium phosphate was significantly higher than other steroid types(P<0.05),and the combined effect amount of dexamethasone was significantly lower than other steroid types(P<0.05);the combined effect amount of serum"10 mL/kg+6 mL/kg"combined dose was lower than other serum doses(P<0.05). CONCLUSION:(1)With the rate of empty bone lacunae and the ratio of trabecular bone area as the judgment standard for the successful establishment of the model,the three modeling methods can successfully construct the rabbit steroid-induced osteonecrosis of femoral head model,of which the steroid combined with lipopolysaccharide method is the best.(2)New Zealand white rabbits and dexamethasone are recommended when selecting the steroid-alone method.Methylprednisolone sodium succinate and low-dose lipopolysaccharide are recommended when selecting the steroid combined with lipopolysaccharide method.Dexamethasone sodium phosphate is recommended when selecting the steroid combined with serum modeling method.

ObjectiveAngle-closure glaucoma (ACG) is one of the major eye-blinding diseases. To diagnose ACG, it is crucial to examine the anterior chamber angle. Current diagnostic tools include slit lamp gonioscopy, water gonioscopy, ultrasound biomicroscopy (UBM), and anterior segment optical coherence tomography (AS-OCT). Slit lamp and water gonioscopy allow convenient observation of the anterior chamber angle, but pose risks of invasive operation and eye infections. UBM can accurately measure the structure of the anterior chamber angle. However, it is complex to operate and unsuitable for patients, who have undergone trauma or ocular surgery. Although AS-OCT provides detailed images, it is costly. The aim of this study is to explore a non-invasive, non-destructive optical reflection tomography (ORT) technique. This technique can achieve low-cost three-dimensional imaging and full-field anterior chamber angle measurement of the porcine eye. MethodsThe experiment involved assembling an optical reflection tomography system, which included a complementary metal oxide semiconductor (CMOS) camera, a telecentric system, a stepper motor, and a white light source, achieving a spatial resolution of approximately 8.5 μm. The process required positioning the porcine eye at the center of the field of the imaging system and rotating it around its central axis using a stepper motor. Reflection projection images were captured at each angle with an exposure time of 1.0 ms and an interval of 2°. The collected reflection-projection data were processed using a filtered reflection tomography algorithm, generating a series of two-dimensional slice data. These slices essentially represented cross-sectional views of the three-dimensional structural image, and were reconstructed into a complete three-dimensional structural image. Based on the reconstructed three-dimensional structural image of the porcine eye, the anterior chamber angles at different positions were measured, and a distribution map of these angles was drawn. Simultaneously, the ORT measurements were compared with the standard results obtained from optical coherence tomography (OCT) to assess the accuracy of ORT measurements. ResultsIn this study, we successfully obtained the reflection projection data of a porcine eye using ORT technology, reconstructed its three-dimensional structural image, and measured the anterior chamber angle, generating the corresponding distribution map. To better distinguish the different structural parts of porcine eye, the three-dimensional structural image was marked with blue, green, and yellow dashed lines from the outer to the inner layers. The area between the blue and green dashed lines corresponded to the sclera. The area between the green and yellow dashed lines corresponded to the iris. The area inside the yellow dashed line corresponded to the pupil. The three-dimensional structural image clearly revealed the key anatomical features of the porcine eye. It was able to measure the anterior chamber angle at different positions. Additionally, the anterior chamber angle measurements of the porcine eye using ORT were compared with the measurements obtained using a TEL320C1 type OCT system, showing an average deviation of 0.51° and a mean square error MSE of 0.317. ConclusionORT is a non-invasive, non-destructive, low-cost, and high-resolution imaging technique capable of achieving three-dimensional structural imaging and full-field anterior chamber angle measurement of a porcine eye. This technology offers a new perspective for the diagnosis of angle-closure glaucoma and is significant for the screening, diagnosis, and monitoring of eye diseases, potentially benefiting clinics and small hospitals in remote areas in the future.