Sparganosis is caused by tapeworm larva of the genus Spirometra, which commonly invades the subcutaneous tissue, and less frequently invades the abdominal wall, intestine, muscle, thorax, breast, eye, brain, spinal cord etc. We experienced a rare case of living sparganosis, which was found in the flexor muscle of the distal forearm. Ultrasonography was helpful in the diagnosis of sparganosis
Abdominal Wall ; Brain ; Breast ; Cestoda ; Diagnosis ; Forearm* ; Intestines ; Larva ; Sparganosis* ; Spinal Cord ; Spirometra ; Subcutaneous Tissue ; Thorax ; Ultrasonography

The oral lesion of acquired syphilis - primary, secondary, and tertiary - is comparatively rare. Most of the time secondary syphilis manifests itself as a systemic disease with maculopapular eruptions of the skin, generalized lymphadenopathy, fever, and occasional eruptions on the mucous membranes. The lesions of the tertiary stage may occur anywhere in the body, including the oral cavity. Necrotizing faciitis of the head and neck is an uncommon, rapidly spreading soft tissue infection of polymicrobial origin characterized by extensive necrosis and gas formation in the subcutaneous tissue and superficial fascia. This is characterized by its fulminating, devastating, and rapid-progressing course. The mortality rate is high if it is not treated promptly and vigorously. Patients with an impaired immune system and those with small-vessel disease such as diabetes mellitus are more prone to develop this infection.
Diabetes Mellitus ; Fasciitis ; Fasciitis, Necrotizing* ; Fever ; Head ; Humans ; Immune System ; Lymphatic Diseases ; Mortality ; Mouth ; Mucous Membrane ; Neck ; Necrosis ; Skin ; Soft Tissue Infections ; Subcutaneous Tissue ; Syphilis*

Insufficiency fracture is a type of stress fracture, which is the result of normal stresses on abnormal bone. Postmenopausal osteoporosis is the most common cause of insufficiency fractures. An early diagnosis is best made with a bone scan or magnetic resonance imaging, as radiographs may initially appear normal. Insufficiency fractures of the lower leg and ankle are less common. Furthermore, reports of medial malleolar insufficiency fracture without any history of trauma in elderly patients are extremely rare. Thus, we report a case with a medial malleolar insufficiency fracture of the ankle in an elderly patient with osteoporosis. This case shows that we should be aware of the possibility of encountering an uncommon medial malleolar insufficiency fracture as a cause of pain in the ankle region of an elderly patient with osteoporosis.
Ankle* ; Early Diagnosis ; Female ; Fractures, Stress* ; History ; Humans ; Leg ; Magnetic Resonance Imaging ; Osteoporosis* ; Osteoporosis, Postmenopausal ; Wounds and Injuries

The purpose of this study was to evaluate the effect of pre-heating on some physical properties of composite resin. Eighty extracted, noncarious human molars were used in the present study. Four different temperatures of composite resin were used: 4degrees C, 17degrees C, 48degrees C, and 56degrees C. The 4degrees C and 17degrees C values represented the refrigerator storage temperature and room temperature respectively. For 48degrees C and 56degrees C, composite resin was heated to the temperatures. As physical properties of composite resin, shear bond strength, microhardness, and degree of conversion were measured. The data for each group were subjected to one-way ANOVAs followed by the Tukey's HSD test at 95% confidence level. Both in enamel and dentin, among composite resin of 4degrees C, 17degrees C, 48degrees C, and 56degrees C, the pre-heated composite resin up to 56degrees C revealed the highest shear bond strength, and pre-heated composite resin to the higher temperature revealed higher shear bond strength. Microhardness value was also higher with composite resin of higher temperature. Degree of conversion was also higher with composite resin of the higher temperature. In this study, it seems that pre-heating composite resin up to the higher temperature may show higher shear bond strength, higher microhardness value, and higher degree of conversion. Therefore, when using composite resin in the clinic, preheating the composite resin could be recommended to have enhanced physical properties of it.
Dental Enamel ; Dentin ; Hot Temperature ; Humans ; Molar

No abstract available.
Adhesives

No abstract available.
Biopsy, Needle* ; Needles*

The purpose of this study was to evaluate the effect of thickness, filling methods and curing methods on the polymerization of dual cured core materials by means of microhardness test. Two dual cured core materials, MultiCore Flow (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Bis-Core (Bisco Inc., Schaumburg, IL, USA) were used in this study. 2 mm (bulky filled), 4 mm (bulky filled), 6 mm (bulky and incrementally filled) and 8 mm (bulky and incrementally filled)-thickness specimens were prepared with light cure or self cure mode. After storage at 37degrees C for 24 hours, the Knoop hardness values (KHN) of top and bottom surfaces were measured and the microhardness ratio of top and bottom surfaces was calculated. The data were analyzed using one-way ANOVA and Scheffe multiple comparison test, with alpha = 0.05. The effect of thickness on the polymerization of dual cured composites showed material specific results. In 2, 4 and 6 mm groups, the KHN of two materials were not affected by thickness. However, in 8 mm group of MultiCore Flow, the KHN of the bottom surface was lower than those of other groups (p < 0.05). The effect of filling methods on the polymerization of dual cured composites was different by their thickness or materials. In 6 mm thickness, there was no significant difference between bulk and incremental filling groups. In 8 mm thickness, Bis-Core showed no significant difference between groups. However, in MultiCore Flow, the microhardness ratio of bulk filling group was lower than that of incremental filling group (p < 0.05). The effect of curing methods on the polymerization of dual cured composites showed material specific results. In Bis-Core, the KHN of dual cured group were higher than those of self cured group at both surfaces (p < 0.05). However, in MultiCore Flow, the results were not similar at both surfaces. At the top surface, dual cured group showed higher KHN than that of self cured group (p < 0.05). However, in the bottom surface, dual cured group showed lower value than that of self cured group (p < 0.05).
Acrylic Resins ; Composite Resins ; Hardness ; Light ; Methacrylates ; Polymerization ; Polymers ; Polyurethanes

OBJECTIVES: The purpose of this study was to evaluate the proximity of the mandibular molar apex to the buccal bone surface in order to provide anatomic information for apical surgery. MATERIALS AND METHODS: Cone-beam computed tomography (CBCT) images of 127 mandibular first molars and 153 mandibular second molars were analyzed from 160 patients' records. The distance was measured from the buccal bone surface to the root apex and the apical 3.0 mm on the cross-sectional view of CBCT. RESULTS: The second molar apex and apical 3 mm were located significantly deeper relative to the buccal bone surface compared with the first molar (p < 0.01). For the mandibular second molars, the distance from the buccal bone surface to the root apex was significantly shorter in patients over 70 years of age (p < 0.05). Furthermore, this distance was significantly shorter when the first molar was missing compared to nonmissing cases (p < 0.05). For the mandibular first molars, the distance to the distal root apex of one distal-rooted tooth was significantly greater than the distance to the disto-buccal root apex (p < 0.01). In mandibular second molar, the distance to the apex of C-shaped roots was significantly greater than the distance to the mesial root apex of non-C-shaped roots (p < 0.01). CONCLUSIONS: For apical surgery in mandibular molars, the distance from the buccal bone surface to the apex and apical 3 mm is significantly affected by the location, patient age, an adjacent missing anterior tooth, and root configuration.
Apicoectomy ; Cone-Beam Computed Tomography ; Humans ; Molar* ; Tooth

Maxillary lateral incisors usually exhibit a single root with a single canal. However, maxillary lateral incisor teeth with unusual morphology of root canal system are frequently reported. These cases of variable root canal anatomy can be treated well by nonsurgical endodontic methods. A detailed description of root canal morphology is fundamental for successful endodontic treatment. Treatment using an operating microscope, radiographs from different angles, and cone-beam computerized tomography (CBCT) can produce more predictable endodontic outcomes.
Cone-Beam Computed Tomography ; Dental Pulp Cavity ; Incisor* ; Methods ; Tooth

The aim of this study was to evaluate the shaping abilities of four different rotary nickel-titanium instruments with anticurvature motion to prepare root canal at danger zone by measuring the change of dentin thickness in order to have techniques of safe preparation of canals with nickel-titanium files. Mesiobuccal and mesiolingual canals of forty mesial roots of extracted human lower molars were instrumented using the crown-down technique with ProFile, GT(TM) Rotary file, Quantec file and ProTaper(TM). In each root, one canal was prepared with a straight up-and-down motion and the other canal was with an anticurvature motion. Canals were instrumented until apical foramens were up to size of 30 by one operator. The muffle system was used to evaluate the root canal preparation. After superimposing the pre- and post-instrumentation canal, change in root dentin thickness was measured at the inner and outer sides of the canal at 1, 3, and 5 mm levels from the furcation. Data were analyzed using two-way ANOVA. Root dentin thickness at danger zone was significantly thinner than that at safe zone at all levels (p < 0.05). There was no significant difference in the change of root dentin thickness between the straight up-and-down and the anticurvature motions at both danger and safe zones in all groups (p > 0.05). ProTaper removed significantly more dentin than other files especially at furcal 3 mm level of danger and safe zones (p < 0.05) Therefore, it was concluded that anticurvature motion with nickel-titanium rotary instruments does not seem to be effective in danger zone of lower molars.
Dental Pulp Cavity* ; Dentin ; Humans ; Molar ; Root Canal Preparation ; Tooth Apex